Message ID | 20181031024316.25944-1-zachary.zhou@intel.com |
---|---|
State | New |
Headers | show |
On 31/10/18 02:43, Zachary Zhou wrote: > libavfilter/vaapi: enable vaapi rotation feature via call Intel iHD driver I'd make the title something like "libavfilter: add rotate_vaapi filter". There is no reason to mention a particular implementation - anyone can implement this API. > It supports clockwise rotation by 0/90/180/270 degrees defined in > va/va_vpp.h, tested following command line on SKL platform > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=angle=180" > -c:v h264_vaapi output.h264 > > Signed-off-by: Zachary Zhou <zachary.zhou@intel.com> > --- > configure | 4 + > libavfilter/Makefile | 1 + > libavfilter/allfilters.c | 1 + > libavfilter/vaapi_vpp.h | 1 + > libavfilter/vf_rotate_vaapi.c | 252 ++++++++++++++++++++++++++++++++++ > 5 files changed, 259 insertions(+) > create mode 100644 libavfilter/vf_rotate_vaapi.c Referencing other discussion, I think this filter should do both the rotation and mirroring features. I don't know what the filter should be called, though - matching the transpose filter as transpose_vaapi seems the most logical choice to me, but I admit the exact options aren't quite right. The effect of rotating by one or three right angles surprised me - I would expect the size to be changed as well, so a 1280x720 input becomes a 720x1280 output rather than squishing the video. > diff --git a/configure b/configure > index 85d5dd5962..4b5718135e 100755 > --- a/configure > +++ b/configure > @@ -3439,6 +3439,7 @@ scale_filter_deps="swscale" > scale_qsv_filter_deps="libmfx" > select_filter_select="pixelutils" > sharpness_vaapi_filter_deps="vaapi" > +rotation_vaapi_filter_deps="vaapi" > showcqt_filter_deps="avcodec avformat swscale" > showcqt_filter_suggest="libfontconfig libfreetype" > showcqt_filter_select="fft" > @@ -6390,6 +6391,9 @@ if enabled vaapi; then > fi > > check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)" > + if ! check_struct "va/va.h" "struct _VAProcPipelineCaps" rotation_flags; then > + disable rotation_vaapi_filter > + fi Use the dependencies instead like other components. (See vp9_vaapi_hwaccel for a check_struct like this one.) > fi > > if enabled_all opencl libdrm ; then > diff --git a/libavfilter/Makefile b/libavfilter/Makefile > index 108a2f87d7..534650364a 100644 > --- a/libavfilter/Makefile > +++ b/libavfilter/Makefile > @@ -349,6 +349,7 @@ OBJS-$(CONFIG_SETRANGE_FILTER) += vf_setparams.o > OBJS-$(CONFIG_SETSAR_FILTER) += vf_aspect.o > OBJS-$(CONFIG_SETTB_FILTER) += settb.o > OBJS-$(CONFIG_SHARPNESS_VAAPI_FILTER) += vf_misc_vaapi.o vaapi_vpp.o > +OBJS-$(CONFIG_ROTATION_VAAPI_FILTER) += vf_rotate_vaapi.o vaapi_vpp.o > OBJS-$(CONFIG_SHOWINFO_FILTER) += vf_showinfo.o > OBJS-$(CONFIG_SHOWPALETTE_FILTER) += vf_showpalette.o > OBJS-$(CONFIG_SHUFFLEFRAMES_FILTER) += vf_shuffleframes.o > diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c > index 557590850b..4b90a7f440 100644 > --- a/libavfilter/allfilters.c > +++ b/libavfilter/allfilters.c > @@ -333,6 +333,7 @@ extern AVFilter ff_vf_setrange; > extern AVFilter ff_vf_setsar; > extern AVFilter ff_vf_settb; > extern AVFilter ff_vf_sharpness_vaapi; > +extern AVFilter ff_vf_rotation_vaapi; > extern AVFilter ff_vf_showinfo; > extern AVFilter ff_vf_showpalette; > extern AVFilter ff_vf_shuffleframes; > diff --git a/libavfilter/vaapi_vpp.h b/libavfilter/vaapi_vpp.h > index 0bc31018d4..cfe19b689f 100644 > --- a/libavfilter/vaapi_vpp.h > +++ b/libavfilter/vaapi_vpp.h > @@ -44,6 +44,7 @@ typedef struct VAAPIVPPContext { > int output_width; // computed width > int output_height; // computed height > > + int rotation_state; No reason to put this in the common context, it can be in the rotate-specific one. > VABufferID filter_buffers[VAProcFilterCount]; > int nb_filter_buffers; > > diff --git a/libavfilter/vf_rotate_vaapi.c b/libavfilter/vf_rotate_vaapi.c > new file mode 100644 > index 0000000000..82e2a0fce4 > --- /dev/null > +++ b/libavfilter/vf_rotate_vaapi.c > @@ -0,0 +1,252 @@ > +/* > + * This file is part of FFmpeg. > + * > + * FFmpeg is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public > + * License as published by the Free Software Foundation; either > + * version 2.1 of the License, or (at your option) any later version. > + * > + * FFmpeg is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with FFmpeg; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA > + */ > +#include <string.h> > + > +#include "libavutil/avassert.h" > +#include "libavutil/mem.h" > +#include "libavutil/opt.h" > +#include "libavutil/pixdesc.h" > + > +#include "avfilter.h" > +#include "formats.h" > +#include "internal.h" > +#include "vaapi_vpp.h" > + > +// Rotation angle values > +enum RotationAngle { > + ROTATION_0 = 0, > + ROTATION_90 = 90, > + ROTATION_180 = 180, > + ROTATION_270 = 270, I'm not sure these four constants add anything. Just use N where you have ROTATION_N? > + > + ROTATION_MIN = ROTATION_0, > + ROTATION_MAX = ROTATION_270, > + ROTATION_DEFAULT = ROTATION_0, > +}; > + > +typedef struct RotationVAAPIContext { > + VAAPIVPPContext vpp_ctx; // must be the first field > + > + int rotation; > +} RotationVAAPIContext; > + > +static int rotation_vaapi_build_filter_params(AVFilterContext *avctx) > +{ > + VAAPIVPPContext *vpp_ctx = avctx->priv; > + RotationVAAPIContext *ctx = avctx->priv; > + > + VAStatus vas; > + int support_flag; > + > + VAProcPipelineCaps pipeline_caps; > + > + memset(&pipeline_caps, 0, sizeof(pipeline_caps)); > + vas = vaQueryVideoProcPipelineCaps(vpp_ctx->hwctx->display, > + vpp_ctx->va_context, > + NULL, 0, > + &pipeline_caps); > + if (vas != VA_STATUS_SUCCESS) { > + av_log(avctx, AV_LOG_ERROR, "Failed to query pipeline " > + "caps: %d (%s).\n", vas, vaErrorStr(vas)); > + return AVERROR(EIO); > + } > + > + if (!pipeline_caps.rotation_flags) { > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support rotation\n"); > + return AVERROR(EINVAL); > + } > + > + switch (ctx->rotation) { > + case ROTATION_0: > + vpp_ctx->rotation_state = VA_ROTATION_NONE; > + break; > + case ROTATION_90: > + vpp_ctx->rotation_state = VA_ROTATION_90; > + break; > + case ROTATION_180: > + vpp_ctx->rotation_state = VA_ROTATION_180; > + break; > + case ROTATION_270: > + vpp_ctx->rotation_state = VA_ROTATION_270; > + break; > + default: > + av_log(avctx, AV_LOG_ERROR, "Failed to set rotation_state to %d. " > + "Clockwise %d, %d, %d and %d are only supported\n", > + ctx->rotation, > + ROTATION_0, ROTATION_90, ROTATION_180, ROTATION_270); > + return AVERROR(EINVAL); > + } > + > + support_flag = pipeline_caps.rotation_flags & > + (1 << vpp_ctx->rotation_state); > + if (!support_flag) { > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support %d\n", > + ctx->rotation); > + return AVERROR(EINVAL); > + } > + > + return 0; > +} > + > +static int rotation_vaapi_filter_frame(AVFilterLink *inlink, AVFrame *input_frame) > +{ > + AVFilterContext *avctx = inlink->dst; > + AVFilterLink *outlink = avctx->outputs[0]; > + VAAPIVPPContext *vpp_ctx = avctx->priv; > + AVFrame *output_frame = NULL; > + VASurfaceID input_surface, output_surface; > + VARectangle input_region; > + > + VAProcPipelineParameterBuffer params; > + int err; > + > + av_log(avctx, AV_LOG_DEBUG, "Filter input: %s, %ux%u (%"PRId64").\n", > + av_get_pix_fmt_name(input_frame->format), > + input_frame->width, input_frame->height, input_frame->pts); > + > + if (vpp_ctx->va_context == VA_INVALID_ID) > + return AVERROR(EINVAL); > + > + input_surface = (VASurfaceID)(uintptr_t)input_frame->data[3]; > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp input.\n", Not misc. > + input_surface); > + > + output_frame = ff_get_video_buffer(outlink, vpp_ctx->output_width, > + vpp_ctx->output_height); > + if (!output_frame) { > + err = AVERROR(ENOMEM); > + goto fail; > + } > + > + output_surface = (VASurfaceID)(uintptr_t)output_frame->data[3]; > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp output.\n", Also not misc. > + output_surface); > + memset(¶ms, 0, sizeof(params)); > + input_region = (VARectangle) { > + .x = 0, > + .y = 0, > + .width = input_frame->width, > + .height = input_frame->height, > + }; > + > + switch (vpp_ctx->rotation_state) { > + case VA_ROTATION_NONE: > + case VA_ROTATION_90: > + case VA_ROTATION_180: > + case VA_ROTATION_270: > + params.rotation_state = vpp_ctx->rotation_state; > + break; > + default: > + av_log(avctx, AV_LOG_ERROR, "VAAPI doesn't support %d\n", > + vpp_ctx->rotation_state); > + goto fail; > + } > + > + if (vpp_ctx->nb_filter_buffers) { > + params.filters = &vpp_ctx->filter_buffers[0]; > + params.num_filters = vpp_ctx->nb_filter_buffers; > + } Shouldn't nb_filter_buffers always be zero here? > + params.surface = input_surface; > + params.surface_region = &input_region; > + params.surface_color_standard = > + ff_vaapi_vpp_colour_standard(input_frame->colorspace); > + > + params.output_region = NULL; > + params.output_background_color = 0xff000000; > + params.output_color_standard = params.surface_color_standard; > + > + params.pipeline_flags = 0; > + params.filter_flags = VA_FRAME_PICTURE; > + > + err = ff_vaapi_vpp_render_picture(avctx, ¶ms, output_surface); > + if (err < 0) > + goto fail; > + > + err = av_frame_copy_props(output_frame, input_frame); I think you want to fix up SAR here somehow to account for the rotation in the 90 and 270 cases. > + if (err < 0) > + goto fail; > + av_frame_free(&input_frame); > + > + av_log(avctx, AV_LOG_DEBUG, "Filter output: %s, %ux%u (%"PRId64").\n", > + av_get_pix_fmt_name(output_frame->format), > + output_frame->width, output_frame->height, output_frame->pts); > + > + return ff_filter_frame(outlink, output_frame); > + > +fail: > + av_frame_free(&input_frame); > + av_frame_free(&output_frame); > + return err; > +} > + > +static av_cold int rotation_vaapi_init(AVFilterContext *avctx) > +{ > + VAAPIVPPContext *vpp_ctx = avctx->priv; > + > + ff_vaapi_vpp_ctx_init(avctx); > + vpp_ctx->pipeline_uninit = ff_vaapi_vpp_pipeline_uninit; > + vpp_ctx->build_filter_params = rotation_vaapi_build_filter_params; > + vpp_ctx->output_format = AV_PIX_FMT_NONE; > + > + return 0; > +} > + > +#define ROFFSET(x) offsetof(RotationVAAPIContext, x) > +#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM) > +static const AVOption rotation_vaapi_options[] = { > + { "angle", "set roation direction", ROFFSET(rotation), AV_OPT_TYPE_INT, { .i64 = ROTATION_MIN }, ROTATION_MIN, ROTATION_MAX, FLAGS, "angle" }, > + { "clock_0", "rotate clockwise 0 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_0 }, .flags=FLAGS, .unit = "angle" }, > + { "clock_90", "rotate clockwise 90 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_90}, .flags=FLAGS, .unit = "angle" }, > + { "clock_180", "rotate clockwise 180 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_180 }, .flags=FLAGS, .unit = "angle" }, > + { "clock_270", "rotate clockwise 270 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_270 }, .flags=FLAGS, .unit = "angle" }, Do these names add anything? I would expect that people will write "90" rather than "clock_90". > + { NULL }, > +}; > + > +AVFILTER_DEFINE_CLASS(rotation_vaapi); > + > +static const AVFilterPad rotation_vaapi_inputs[] = { > + { > + .name = "default", > + .type = AVMEDIA_TYPE_VIDEO, > + .filter_frame = &rotation_vaapi_filter_frame, > + .config_props = &ff_vaapi_vpp_config_input, > + }, > + { NULL } > +}; > + > +static const AVFilterPad rotation_vaapi_outputs[] = { > + { > + .name = "default", > + .type = AVMEDIA_TYPE_VIDEO, > + .config_props = &ff_vaapi_vpp_config_output, > + }, > + { NULL } > +}; > + > +AVFilter ff_vf_rotation_vaapi = { > + .name = "rotation_vaapi", > + .description = NULL_IF_CONFIG_SMALL("VAAPI VPP for rotation"), > + .priv_size = sizeof(RotationVAAPIContext), > + .init = &rotation_vaapi_init, > + .uninit = &ff_vaapi_vpp_ctx_uninit, > + .query_formats = &ff_vaapi_vpp_query_formats, > + .inputs = rotation_vaapi_inputs, > + .outputs = rotation_vaapi_outputs, > + .priv_class = &rotation_vaapi_class, > + .flags_internal = FF_FILTER_FLAG_HWFRAME_AWARE, > +}; > Thanks, - Mark
On 31/10/18 02:43, Zachary Zhou wrote: > libavfilter/vaapi: enable vaapi rotation feature via call Intel iHD driver I'd make the title something like "libavfilter: add rotate_vaapi filter". There is no reason to mention a particular implementation - anyone can implement this API. > It supports clockwise rotation by 0/90/180/270 degrees defined in > va/va_vpp.h, tested following command line on SKL platform > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=angle=180" > -c:v h264_vaapi output.h264 > > Signed-off-by: Zachary Zhou <zachary.zhou@intel.com> > --- > configure | 4 + > libavfilter/Makefile | 1 + > libavfilter/allfilters.c | 1 + > libavfilter/vaapi_vpp.h | 1 + > libavfilter/vf_rotate_vaapi.c | 252 ++++++++++++++++++++++++++++++++++ > 5 files changed, 259 insertions(+) > create mode 100644 libavfilter/vf_rotate_vaapi.c Referencing other discussion, I think this filter should do both the rotation and mirroring features. I don't know what the filter should be called, though - matching the transpose filter as transpose_vaapi seems the most logical choice to me, but I admit the exact options aren't quite right. The effect of rotating by one or three right angles surprised me - I would expect the size to be changed as well, so a 1280x720 input becomes a 720x1280 output rather than squishing the video. > diff --git a/configure b/configure > index 85d5dd5962..4b5718135e 100755 > --- a/configure > +++ b/configure > @@ -3439,6 +3439,7 @@ scale_filter_deps="swscale" > scale_qsv_filter_deps="libmfx" > select_filter_select="pixelutils" > sharpness_vaapi_filter_deps="vaapi" > +rotation_vaapi_filter_deps="vaapi" > showcqt_filter_deps="avcodec avformat swscale" > showcqt_filter_suggest="libfontconfig libfreetype" > showcqt_filter_select="fft" > @@ -6390,6 +6391,9 @@ if enabled vaapi; then > fi > > check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)" > + if ! check_struct "va/va.h" "struct _VAProcPipelineCaps" rotation_flags; then > + disable rotation_vaapi_filter > + fi Use the dependencies instead like other components. (See vp9_vaapi_hwaccel for a check_struct like this one.) > fi > > if enabled_all opencl libdrm ; then > diff --git a/libavfilter/Makefile b/libavfilter/Makefile > index 108a2f87d7..534650364a 100644 > --- a/libavfilter/Makefile > +++ b/libavfilter/Makefile > @@ -349,6 +349,7 @@ OBJS-$(CONFIG_SETRANGE_FILTER) += vf_setparams.o > OBJS-$(CONFIG_SETSAR_FILTER) += vf_aspect.o > OBJS-$(CONFIG_SETTB_FILTER) += settb.o > OBJS-$(CONFIG_SHARPNESS_VAAPI_FILTER) += vf_misc_vaapi.o vaapi_vpp.o > +OBJS-$(CONFIG_ROTATION_VAAPI_FILTER) += vf_rotate_vaapi.o vaapi_vpp.o > OBJS-$(CONFIG_SHOWINFO_FILTER) += vf_showinfo.o > OBJS-$(CONFIG_SHOWPALETTE_FILTER) += vf_showpalette.o > OBJS-$(CONFIG_SHUFFLEFRAMES_FILTER) += vf_shuffleframes.o > diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c > index 557590850b..4b90a7f440 100644 > --- a/libavfilter/allfilters.c > +++ b/libavfilter/allfilters.c > @@ -333,6 +333,7 @@ extern AVFilter ff_vf_setrange; > extern AVFilter ff_vf_setsar; > extern AVFilter ff_vf_settb; > extern AVFilter ff_vf_sharpness_vaapi; > +extern AVFilter ff_vf_rotation_vaapi; > extern AVFilter ff_vf_showinfo; > extern AVFilter ff_vf_showpalette; > extern AVFilter ff_vf_shuffleframes; > diff --git a/libavfilter/vaapi_vpp.h b/libavfilter/vaapi_vpp.h > index 0bc31018d4..cfe19b689f 100644 > --- a/libavfilter/vaapi_vpp.h > +++ b/libavfilter/vaapi_vpp.h > @@ -44,6 +44,7 @@ typedef struct VAAPIVPPContext { > int output_width; // computed width > int output_height; // computed height > > + int rotation_state; No reason to put this in the common context, it can be in the rotate-specific one. > VABufferID filter_buffers[VAProcFilterCount]; > int nb_filter_buffers; > > diff --git a/libavfilter/vf_rotate_vaapi.c b/libavfilter/vf_rotate_vaapi.c > new file mode 100644 > index 0000000000..82e2a0fce4 > --- /dev/null > +++ b/libavfilter/vf_rotate_vaapi.c > @@ -0,0 +1,252 @@ > +/* > + * This file is part of FFmpeg. > + * > + * FFmpeg is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public > + * License as published by the Free Software Foundation; either > + * version 2.1 of the License, or (at your option) any later version. > + * > + * FFmpeg is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with FFmpeg; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA > + */ > +#include <string.h> > + > +#include "libavutil/avassert.h" > +#include "libavutil/mem.h" > +#include "libavutil/opt.h" > +#include "libavutil/pixdesc.h" > + > +#include "avfilter.h" > +#include "formats.h" > +#include "internal.h" > +#include "vaapi_vpp.h" > + > +// Rotation angle values > +enum RotationAngle { > + ROTATION_0 = 0, > + ROTATION_90 = 90, > + ROTATION_180 = 180, > + ROTATION_270 = 270, I'm not sure these four constants add anything. Just use N where you have ROTATION_N? > + > + ROTATION_MIN = ROTATION_0, > + ROTATION_MAX = ROTATION_270, > + ROTATION_DEFAULT = ROTATION_0, > +}; > + > +typedef struct RotationVAAPIContext { > + VAAPIVPPContext vpp_ctx; // must be the first field > + > + int rotation; > +} RotationVAAPIContext; > + > +static int rotation_vaapi_build_filter_params(AVFilterContext *avctx) > +{ > + VAAPIVPPContext *vpp_ctx = avctx->priv; > + RotationVAAPIContext *ctx = avctx->priv; > + > + VAStatus vas; > + int support_flag; > + > + VAProcPipelineCaps pipeline_caps; > + > + memset(&pipeline_caps, 0, sizeof(pipeline_caps)); > + vas = vaQueryVideoProcPipelineCaps(vpp_ctx->hwctx->display, > + vpp_ctx->va_context, > + NULL, 0, > + &pipeline_caps); > + if (vas != VA_STATUS_SUCCESS) { > + av_log(avctx, AV_LOG_ERROR, "Failed to query pipeline " > + "caps: %d (%s).\n", vas, vaErrorStr(vas)); > + return AVERROR(EIO); > + } > + > + if (!pipeline_caps.rotation_flags) { > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support rotation\n"); > + return AVERROR(EINVAL); > + } > + > + switch (ctx->rotation) { > + case ROTATION_0: > + vpp_ctx->rotation_state = VA_ROTATION_NONE; > + break; > + case ROTATION_90: > + vpp_ctx->rotation_state = VA_ROTATION_90; > + break; > + case ROTATION_180: > + vpp_ctx->rotation_state = VA_ROTATION_180; > + break; > + case ROTATION_270: > + vpp_ctx->rotation_state = VA_ROTATION_270; > + break; > + default: > + av_log(avctx, AV_LOG_ERROR, "Failed to set rotation_state to %d. " > + "Clockwise %d, %d, %d and %d are only supported\n", > + ctx->rotation, > + ROTATION_0, ROTATION_90, ROTATION_180, ROTATION_270); > + return AVERROR(EINVAL); > + } > + > + support_flag = pipeline_caps.rotation_flags & > + (1 << vpp_ctx->rotation_state); > + if (!support_flag) { > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support %d\n", > + ctx->rotation); > + return AVERROR(EINVAL); > + } > + > + return 0; > +} > + > +static int rotation_vaapi_filter_frame(AVFilterLink *inlink, AVFrame *input_frame) > +{ > + AVFilterContext *avctx = inlink->dst; > + AVFilterLink *outlink = avctx->outputs[0]; > + VAAPIVPPContext *vpp_ctx = avctx->priv; > + AVFrame *output_frame = NULL; > + VASurfaceID input_surface, output_surface; > + VARectangle input_region; > + > + VAProcPipelineParameterBuffer params; > + int err; > + > + av_log(avctx, AV_LOG_DEBUG, "Filter input: %s, %ux%u (%"PRId64").\n", > + av_get_pix_fmt_name(input_frame->format), > + input_frame->width, input_frame->height, input_frame->pts); > + > + if (vpp_ctx->va_context == VA_INVALID_ID) > + return AVERROR(EINVAL); > + > + input_surface = (VASurfaceID)(uintptr_t)input_frame->data[3]; > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp input.\n", Not misc. > + input_surface); > + > + output_frame = ff_get_video_buffer(outlink, vpp_ctx->output_width, > + vpp_ctx->output_height); > + if (!output_frame) { > + err = AVERROR(ENOMEM); > + goto fail; > + } > + > + output_surface = (VASurfaceID)(uintptr_t)output_frame->data[3]; > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp output.\n", Also not misc. > + output_surface); > + memset(¶ms, 0, sizeof(params)); > + input_region = (VARectangle) { > + .x = 0, > + .y = 0, > + .width = input_frame->width, > + .height = input_frame->height, > + }; > + > + switch (vpp_ctx->rotation_state) { > + case VA_ROTATION_NONE: > + case VA_ROTATION_90: > + case VA_ROTATION_180: > + case VA_ROTATION_270: > + params.rotation_state = vpp_ctx->rotation_state; > + break; > + default: > + av_log(avctx, AV_LOG_ERROR, "VAAPI doesn't support %d\n", > + vpp_ctx->rotation_state); > + goto fail; > + } > + > + if (vpp_ctx->nb_filter_buffers) { > + params.filters = &vpp_ctx->filter_buffers[0]; > + params.num_filters = vpp_ctx->nb_filter_buffers; > + } Shouldn't nb_filter_buffers always be zero here? > + params.surface = input_surface; > + params.surface_region = &input_region; > + params.surface_color_standard = > + ff_vaapi_vpp_colour_standard(input_frame->colorspace); > + > + params.output_region = NULL; > + params.output_background_color = 0xff000000; > + params.output_color_standard = params.surface_color_standard; > + > + params.pipeline_flags = 0; > + params.filter_flags = VA_FRAME_PICTURE; > + > + err = ff_vaapi_vpp_render_picture(avctx, ¶ms, output_surface); > + if (err < 0) > + goto fail; > + > + err = av_frame_copy_props(output_frame, input_frame); I think you want to fix up SAR here somehow to account for the rotation in the 90 and 270 cases. > + if (err < 0) > + goto fail; > + av_frame_free(&input_frame); > + > + av_log(avctx, AV_LOG_DEBUG, "Filter output: %s, %ux%u (%"PRId64").\n", > + av_get_pix_fmt_name(output_frame->format), > + output_frame->width, output_frame->height, output_frame->pts); > + > + return ff_filter_frame(outlink, output_frame); > + > +fail: > + av_frame_free(&input_frame); > + av_frame_free(&output_frame); > + return err; > +} > + > +static av_cold int rotation_vaapi_init(AVFilterContext *avctx) > +{ > + VAAPIVPPContext *vpp_ctx = avctx->priv; > + > + ff_vaapi_vpp_ctx_init(avctx); > + vpp_ctx->pipeline_uninit = ff_vaapi_vpp_pipeline_uninit; > + vpp_ctx->build_filter_params = rotation_vaapi_build_filter_params; > + vpp_ctx->output_format = AV_PIX_FMT_NONE; > + > + return 0; > +} > + > +#define ROFFSET(x) offsetof(RotationVAAPIContext, x) > +#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM) > +static const AVOption rotation_vaapi_options[] = { > + { "angle", "set roation direction", ROFFSET(rotation), AV_OPT_TYPE_INT, { .i64 = ROTATION_MIN }, ROTATION_MIN, ROTATION_MAX, FLAGS, "angle" }, > + { "clock_0", "rotate clockwise 0 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_0 }, .flags=FLAGS, .unit = "angle" }, > + { "clock_90", "rotate clockwise 90 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_90}, .flags=FLAGS, .unit = "angle" }, > + { "clock_180", "rotate clockwise 180 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_180 }, .flags=FLAGS, .unit = "angle" }, > + { "clock_270", "rotate clockwise 270 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_270 }, .flags=FLAGS, .unit = "angle" }, Do these names add anything? I would expect that people will write "90" rather than "clock_90". > + { NULL }, > +}; > + > +AVFILTER_DEFINE_CLASS(rotation_vaapi); > + > +static const AVFilterPad rotation_vaapi_inputs[] = { > + { > + .name = "default", > + .type = AVMEDIA_TYPE_VIDEO, > + .filter_frame = &rotation_vaapi_filter_frame, > + .config_props = &ff_vaapi_vpp_config_input, > + }, > + { NULL } > +}; > + > +static const AVFilterPad rotation_vaapi_outputs[] = { > + { > + .name = "default", > + .type = AVMEDIA_TYPE_VIDEO, > + .config_props = &ff_vaapi_vpp_config_output, > + }, > + { NULL } > +}; > + > +AVFilter ff_vf_rotation_vaapi = { > + .name = "rotation_vaapi", > + .description = NULL_IF_CONFIG_SMALL("VAAPI VPP for rotation"), > + .priv_size = sizeof(RotationVAAPIContext), > + .init = &rotation_vaapi_init, > + .uninit = &ff_vaapi_vpp_ctx_uninit, > + .query_formats = &ff_vaapi_vpp_query_formats, > + .inputs = rotation_vaapi_inputs, > + .outputs = rotation_vaapi_outputs, > + .priv_class = &rotation_vaapi_class, > + .flags_internal = FF_FILTER_FLAG_HWFRAME_AWARE, > +}; > Thanks, - Mark
Thanks Mark, I am considering it. I will send a new patch including both vaapi rotation and mirroring. > -----Original Message----- > From: ffmpeg-devel [mailto:ffmpeg-devel-bounces@ffmpeg.org] On Behalf Of > Mark Thompson > Sent: Thursday, November 1, 2018 7:36 AM > To: ffmpeg-devel@ffmpeg.org > Subject: Re: [FFmpeg-devel] [PATCH V3] libavfilter/vaapi: enable vaapi > rotation feature via call Intel iHD driver > > On 31/10/18 02:43, Zachary Zhou wrote: > > libavfilter/vaapi: enable vaapi rotation feature via call Intel iHD > > driver > > I'd make the title something like "libavfilter: add rotate_vaapi filter". There is > no reason to mention a particular implementation - anyone can implement > this API. > > > It supports clockwise rotation by 0/90/180/270 degrees defined in > > va/va_vpp.h, tested following command line on SKL platform > > > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=angle=180" > > -c:v h264_vaapi output.h264 > > > > Signed-off-by: Zachary Zhou <zachary.zhou@intel.com> > > --- > > configure | 4 + > > libavfilter/Makefile | 1 + > > libavfilter/allfilters.c | 1 + > > libavfilter/vaapi_vpp.h | 1 + > > libavfilter/vf_rotate_vaapi.c | 252 > > ++++++++++++++++++++++++++++++++++ > > 5 files changed, 259 insertions(+) > > create mode 100644 libavfilter/vf_rotate_vaapi.c > > Referencing other discussion, I think this filter should do both the rotation and > mirroring features. I don't know what the filter should be called, though - > matching the transpose filter as transpose_vaapi seems the most logical > choice to me, but I admit the exact options aren't quite right. > > The effect of rotating by one or three right angles surprised me - I would > expect the size to be changed as well, so a 1280x720 input becomes a > 720x1280 output rather than squishing the video. > > > diff --git a/configure b/configure > > index 85d5dd5962..4b5718135e 100755 > > --- a/configure > > +++ b/configure > > @@ -3439,6 +3439,7 @@ scale_filter_deps="swscale" > > scale_qsv_filter_deps="libmfx" > > select_filter_select="pixelutils" > > sharpness_vaapi_filter_deps="vaapi" > > +rotation_vaapi_filter_deps="vaapi" > > showcqt_filter_deps="avcodec avformat swscale" > > showcqt_filter_suggest="libfontconfig libfreetype" > > showcqt_filter_select="fft" > > @@ -6390,6 +6391,9 @@ if enabled vaapi; then > > fi > > > > check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)" > > + if ! check_struct "va/va.h" "struct _VAProcPipelineCaps" rotation_flags; > then > > + disable rotation_vaapi_filter > > + fi > > Use the dependencies instead like other components. (See > vp9_vaapi_hwaccel for a check_struct like this one.) > > > fi > > > > if enabled_all opencl libdrm ; then > > diff --git a/libavfilter/Makefile b/libavfilter/Makefile index > > 108a2f87d7..534650364a 100644 > > --- a/libavfilter/Makefile > > +++ b/libavfilter/Makefile > > @@ -349,6 +349,7 @@ OBJS-$(CONFIG_SETRANGE_FILTER) += > vf_setparams.o > > OBJS-$(CONFIG_SETSAR_FILTER) += vf_aspect.o > > OBJS-$(CONFIG_SETTB_FILTER) += settb.o > > OBJS-$(CONFIG_SHARPNESS_VAAPI_FILTER) += vf_misc_vaapi.o > vaapi_vpp.o > > +OBJS-$(CONFIG_ROTATION_VAAPI_FILTER) += vf_rotate_vaapi.o > vaapi_vpp.o > > OBJS-$(CONFIG_SHOWINFO_FILTER) += vf_showinfo.o > > OBJS-$(CONFIG_SHOWPALETTE_FILTER) += vf_showpalette.o > > OBJS-$(CONFIG_SHUFFLEFRAMES_FILTER) += vf_shuffleframes.o > > diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c index > > 557590850b..4b90a7f440 100644 > > --- a/libavfilter/allfilters.c > > +++ b/libavfilter/allfilters.c > > @@ -333,6 +333,7 @@ extern AVFilter ff_vf_setrange; extern AVFilter > > ff_vf_setsar; extern AVFilter ff_vf_settb; extern AVFilter > > ff_vf_sharpness_vaapi; > > +extern AVFilter ff_vf_rotation_vaapi; > > extern AVFilter ff_vf_showinfo; > > extern AVFilter ff_vf_showpalette; > > extern AVFilter ff_vf_shuffleframes; > > diff --git a/libavfilter/vaapi_vpp.h b/libavfilter/vaapi_vpp.h index > > 0bc31018d4..cfe19b689f 100644 > > --- a/libavfilter/vaapi_vpp.h > > +++ b/libavfilter/vaapi_vpp.h > > @@ -44,6 +44,7 @@ typedef struct VAAPIVPPContext { > > int output_width; // computed width > > int output_height; // computed height > > > > + int rotation_state; > > No reason to put this in the common context, it can be in the rotate-specific > one. I put int rotation_state here, just because of the share code between this filter and vf_misc_vaapi.c, I will consider move it. > > > VABufferID filter_buffers[VAProcFilterCount]; > > int nb_filter_buffers; > > > > diff --git a/libavfilter/vf_rotate_vaapi.c > > b/libavfilter/vf_rotate_vaapi.c new file mode 100644 index > > 0000000000..82e2a0fce4 > > --- /dev/null > > +++ b/libavfilter/vf_rotate_vaapi.c > > @@ -0,0 +1,252 @@ > > +/* > > + * This file is part of FFmpeg. > > + * > > + * FFmpeg is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU Lesser General Public > > + * License as published by the Free Software Foundation; either > > + * version 2.1 of the License, or (at your option) any later version. > > + * > > + * FFmpeg is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > GNU > > + * Lesser General Public License for more details. > > + * > > + * You should have received a copy of the GNU Lesser General Public > > + * License along with FFmpeg; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > > +02110-1301 USA */ #include <string.h> > > + > > +#include "libavutil/avassert.h" > > +#include "libavutil/mem.h" > > +#include "libavutil/opt.h" > > +#include "libavutil/pixdesc.h" > > + > > +#include "avfilter.h" > > +#include "formats.h" > > +#include "internal.h" > > +#include "vaapi_vpp.h" > > + > > +// Rotation angle values > > +enum RotationAngle { > > + ROTATION_0 = 0, > > + ROTATION_90 = 90, > > + ROTATION_180 = 180, > > + ROTATION_270 = 270, > > I'm not sure these four constants add anything. Just use N where you have > ROTATION_N? > > > + > > + ROTATION_MIN = ROTATION_0, > > + ROTATION_MAX = ROTATION_270, > > + ROTATION_DEFAULT = ROTATION_0, > > +}; > > + > > +typedef struct RotationVAAPIContext { > > + VAAPIVPPContext vpp_ctx; // must be the first field > > + > > + int rotation; > > +} RotationVAAPIContext; > > + > > +static int rotation_vaapi_build_filter_params(AVFilterContext *avctx) > > +{ > > + VAAPIVPPContext *vpp_ctx = avctx->priv; > > + RotationVAAPIContext *ctx = avctx->priv; > > + > > + VAStatus vas; > > + int support_flag; > > + > > + VAProcPipelineCaps pipeline_caps; > > + > > + memset(&pipeline_caps, 0, sizeof(pipeline_caps)); > > + vas = vaQueryVideoProcPipelineCaps(vpp_ctx->hwctx->display, > > + vpp_ctx->va_context, > > + NULL, 0, > > + &pipeline_caps); > > + if (vas != VA_STATUS_SUCCESS) { > > + av_log(avctx, AV_LOG_ERROR, "Failed to query pipeline " > > + "caps: %d (%s).\n", vas, vaErrorStr(vas)); > > + return AVERROR(EIO); > > + } > > + > > + if (!pipeline_caps.rotation_flags) { > > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support > rotation\n"); > > + return AVERROR(EINVAL); > > + } > > + > > + switch (ctx->rotation) { > > + case ROTATION_0: > > + vpp_ctx->rotation_state = VA_ROTATION_NONE; > > + break; > > + case ROTATION_90: > > + vpp_ctx->rotation_state = VA_ROTATION_90; > > + break; > > + case ROTATION_180: > > + vpp_ctx->rotation_state = VA_ROTATION_180; > > + break; > > + case ROTATION_270: > > + vpp_ctx->rotation_state = VA_ROTATION_270; > > + break; > > + default: > > + av_log(avctx, AV_LOG_ERROR, "Failed to set rotation_state to %d. " > > + "Clockwise %d, %d, %d and %d are only supported\n", > > + ctx->rotation, > > + ROTATION_0, ROTATION_90, ROTATION_180, ROTATION_270); > > + return AVERROR(EINVAL); > > + } > > + > > + support_flag = pipeline_caps.rotation_flags & > > + (1 << vpp_ctx->rotation_state); > > + if (!support_flag) { > > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support %d\n", > > + ctx->rotation); > > + return AVERROR(EINVAL); > > + } > > + > > + return 0; > > +} > > + > > +static int rotation_vaapi_filter_frame(AVFilterLink *inlink, AVFrame > > +*input_frame) { > > + AVFilterContext *avctx = inlink->dst; > > + AVFilterLink *outlink = avctx->outputs[0]; > > + VAAPIVPPContext *vpp_ctx = avctx->priv; > > + AVFrame *output_frame = NULL; > > + VASurfaceID input_surface, output_surface; > > + VARectangle input_region; > > + > > + VAProcPipelineParameterBuffer params; > > + int err; > > + > > + av_log(avctx, AV_LOG_DEBUG, "Filter input: %s, %ux%u (%"PRId64").\n", > > + av_get_pix_fmt_name(input_frame->format), > > + input_frame->width, input_frame->height, > > + input_frame->pts); > > + > > + if (vpp_ctx->va_context == VA_INVALID_ID) > > + return AVERROR(EINVAL); > > + > > + input_surface = (VASurfaceID)(uintptr_t)input_frame->data[3]; > > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp > > + input.\n", > > Not misc. > > > + input_surface); > > + > > + output_frame = ff_get_video_buffer(outlink, vpp_ctx->output_width, > > + vpp_ctx->output_height); > > + if (!output_frame) { > > + err = AVERROR(ENOMEM); > > + goto fail; > > + } > > + > > + output_surface = (VASurfaceID)(uintptr_t)output_frame->data[3]; > > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp > > + output.\n", > > Also not misc. > > > + output_surface); > > + memset(¶ms, 0, sizeof(params)); > > + input_region = (VARectangle) { > > + .x = 0, > > + .y = 0, > > + .width = input_frame->width, > > + .height = input_frame->height, > > + }; > > + > > + switch (vpp_ctx->rotation_state) { > > + case VA_ROTATION_NONE: > > + case VA_ROTATION_90: > > + case VA_ROTATION_180: > > + case VA_ROTATION_270: > > + params.rotation_state = vpp_ctx->rotation_state; > > + break; > > + default: > > + av_log(avctx, AV_LOG_ERROR, "VAAPI doesn't support %d\n", > > + vpp_ctx->rotation_state); > > + goto fail; > > + } > > + > > + if (vpp_ctx->nb_filter_buffers) { > > + params.filters = &vpp_ctx->filter_buffers[0]; > > + params.num_filters = vpp_ctx->nb_filter_buffers; > > + } > > Shouldn't nb_filter_buffers always be zero here? > > > + params.surface = input_surface; > > + params.surface_region = &input_region; > > + params.surface_color_standard = > > + ff_vaapi_vpp_colour_standard(input_frame->colorspace); > > + > > + params.output_region = NULL; > > + params.output_background_color = 0xff000000; > > + params.output_color_standard = params.surface_color_standard; > > + > > + params.pipeline_flags = 0; > > + params.filter_flags = VA_FRAME_PICTURE; > > + > > + err = ff_vaapi_vpp_render_picture(avctx, ¶ms, output_surface); > > + if (err < 0) > > + goto fail; > > + > > + err = av_frame_copy_props(output_frame, input_frame); > > I think you want to fix up SAR here somehow to account for the rotation in the > 90 and 270 cases. > > > + if (err < 0) > > + goto fail; > > + av_frame_free(&input_frame); > > + > > + av_log(avctx, AV_LOG_DEBUG, "Filter output: %s, %ux%u > (%"PRId64").\n", > > + av_get_pix_fmt_name(output_frame->format), > > + output_frame->width, output_frame->height, > > + output_frame->pts); > > + > > + return ff_filter_frame(outlink, output_frame); > > + > > +fail: > > + av_frame_free(&input_frame); > > + av_frame_free(&output_frame); > > + return err; > > +} > > + > > +static av_cold int rotation_vaapi_init(AVFilterContext *avctx) { > > + VAAPIVPPContext *vpp_ctx = avctx->priv; > > + > > + ff_vaapi_vpp_ctx_init(avctx); > > + vpp_ctx->pipeline_uninit = ff_vaapi_vpp_pipeline_uninit; > > + vpp_ctx->build_filter_params = rotation_vaapi_build_filter_params; > > + vpp_ctx->output_format = AV_PIX_FMT_NONE; > > + > > + return 0; > > +} > > + > > +#define ROFFSET(x) offsetof(RotationVAAPIContext, x) #define FLAGS > > +(AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM) static > const > > +AVOption rotation_vaapi_options[] = { > > + { "angle", "set roation direction", ROFFSET(rotation), AV_OPT_TYPE_INT, > { .i64 = ROTATION_MIN }, ROTATION_MIN, ROTATION_MAX, FLAGS, "angle" }, > > + { "clock_0", "rotate clockwise 0 degrees", 0, AV_OPT_TYPE_CONST, > { .i64 = ROTATION_0 }, .flags=FLAGS, .unit = "angle" }, > > + { "clock_90", "rotate clockwise 90 degrees", 0, AV_OPT_TYPE_CONST, > { .i64 = ROTATION_90}, .flags=FLAGS, .unit = "angle" }, > > + { "clock_180", "rotate clockwise 180 degrees", 0, AV_OPT_TYPE_CONST, > { .i64 = ROTATION_180 }, .flags=FLAGS, .unit = "angle" }, > > + { "clock_270", "rotate clockwise 270 degrees", 0, > > +AV_OPT_TYPE_CONST, { .i64 = ROTATION_270 }, .flags=FLAGS, .unit = > > +"angle" }, > > Do these names add anything? I would expect that people will write "90" > rather than "clock_90". > > > + { NULL }, > > +}; > > + > > +AVFILTER_DEFINE_CLASS(rotation_vaapi); > > + > > +static const AVFilterPad rotation_vaapi_inputs[] = { > > + { > > + .name = "default", > > + .type = AVMEDIA_TYPE_VIDEO, > > + .filter_frame = &rotation_vaapi_filter_frame, > > + .config_props = &ff_vaapi_vpp_config_input, > > + }, > > + { NULL } > > +}; > > + > > +static const AVFilterPad rotation_vaapi_outputs[] = { > > + { > > + .name = "default", > > + .type = AVMEDIA_TYPE_VIDEO, > > + .config_props = &ff_vaapi_vpp_config_output, > > + }, > > + { NULL } > > +}; > > + > > +AVFilter ff_vf_rotation_vaapi = { > > + .name = "rotation_vaapi", > > + .description = NULL_IF_CONFIG_SMALL("VAAPI VPP for rotation"), > > + .priv_size = sizeof(RotationVAAPIContext), > > + .init = &rotation_vaapi_init, > > + .uninit = &ff_vaapi_vpp_ctx_uninit, > > + .query_formats = &ff_vaapi_vpp_query_formats, > > + .inputs = rotation_vaapi_inputs, > > + .outputs = rotation_vaapi_outputs, > > + .priv_class = &rotation_vaapi_class, > > + .flags_internal = FF_FILTER_FLAG_HWFRAME_AWARE, }; > > > > Thanks, > > - Mark > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
diff --git a/configure b/configure index 85d5dd5962..4b5718135e 100755 --- a/configure +++ b/configure @@ -3439,6 +3439,7 @@ scale_filter_deps="swscale" scale_qsv_filter_deps="libmfx" select_filter_select="pixelutils" sharpness_vaapi_filter_deps="vaapi" +rotation_vaapi_filter_deps="vaapi" showcqt_filter_deps="avcodec avformat swscale" showcqt_filter_suggest="libfontconfig libfreetype" showcqt_filter_select="fft" @@ -6390,6 +6391,9 @@ if enabled vaapi; then fi check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)" + if ! check_struct "va/va.h" "struct _VAProcPipelineCaps" rotation_flags; then + disable rotation_vaapi_filter + fi fi if enabled_all opencl libdrm ; then diff --git a/libavfilter/Makefile b/libavfilter/Makefile index 108a2f87d7..534650364a 100644 --- a/libavfilter/Makefile +++ b/libavfilter/Makefile @@ -349,6 +349,7 @@ OBJS-$(CONFIG_SETRANGE_FILTER) += vf_setparams.o OBJS-$(CONFIG_SETSAR_FILTER) += vf_aspect.o OBJS-$(CONFIG_SETTB_FILTER) += settb.o OBJS-$(CONFIG_SHARPNESS_VAAPI_FILTER) += vf_misc_vaapi.o vaapi_vpp.o +OBJS-$(CONFIG_ROTATION_VAAPI_FILTER) += vf_rotate_vaapi.o vaapi_vpp.o OBJS-$(CONFIG_SHOWINFO_FILTER) += vf_showinfo.o OBJS-$(CONFIG_SHOWPALETTE_FILTER) += vf_showpalette.o OBJS-$(CONFIG_SHUFFLEFRAMES_FILTER) += vf_shuffleframes.o diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c index 557590850b..4b90a7f440 100644 --- a/libavfilter/allfilters.c +++ b/libavfilter/allfilters.c @@ -333,6 +333,7 @@ extern AVFilter ff_vf_setrange; extern AVFilter ff_vf_setsar; extern AVFilter ff_vf_settb; extern AVFilter ff_vf_sharpness_vaapi; +extern AVFilter ff_vf_rotation_vaapi; extern AVFilter ff_vf_showinfo; extern AVFilter ff_vf_showpalette; extern AVFilter ff_vf_shuffleframes; diff --git a/libavfilter/vaapi_vpp.h b/libavfilter/vaapi_vpp.h index 0bc31018d4..cfe19b689f 100644 --- a/libavfilter/vaapi_vpp.h +++ b/libavfilter/vaapi_vpp.h @@ -44,6 +44,7 @@ typedef struct VAAPIVPPContext { int output_width; // computed width int output_height; // computed height + int rotation_state; VABufferID filter_buffers[VAProcFilterCount]; int nb_filter_buffers; diff --git a/libavfilter/vf_rotate_vaapi.c b/libavfilter/vf_rotate_vaapi.c new file mode 100644 index 0000000000..82e2a0fce4 --- /dev/null +++ b/libavfilter/vf_rotate_vaapi.c @@ -0,0 +1,252 @@ +/* + * This file is part of FFmpeg. + * + * FFmpeg is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * FFmpeg is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with FFmpeg; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <string.h> + +#include "libavutil/avassert.h" +#include "libavutil/mem.h" +#include "libavutil/opt.h" +#include "libavutil/pixdesc.h" + +#include "avfilter.h" +#include "formats.h" +#include "internal.h" +#include "vaapi_vpp.h" + +// Rotation angle values +enum RotationAngle { + ROTATION_0 = 0, + ROTATION_90 = 90, + ROTATION_180 = 180, + ROTATION_270 = 270, + + ROTATION_MIN = ROTATION_0, + ROTATION_MAX = ROTATION_270, + ROTATION_DEFAULT = ROTATION_0, +}; + +typedef struct RotationVAAPIContext { + VAAPIVPPContext vpp_ctx; // must be the first field + + int rotation; +} RotationVAAPIContext; + +static int rotation_vaapi_build_filter_params(AVFilterContext *avctx) +{ + VAAPIVPPContext *vpp_ctx = avctx->priv; + RotationVAAPIContext *ctx = avctx->priv; + + VAStatus vas; + int support_flag; + + VAProcPipelineCaps pipeline_caps; + + memset(&pipeline_caps, 0, sizeof(pipeline_caps)); + vas = vaQueryVideoProcPipelineCaps(vpp_ctx->hwctx->display, + vpp_ctx->va_context, + NULL, 0, + &pipeline_caps); + if (vas != VA_STATUS_SUCCESS) { + av_log(avctx, AV_LOG_ERROR, "Failed to query pipeline " + "caps: %d (%s).\n", vas, vaErrorStr(vas)); + return AVERROR(EIO); + } + + if (!pipeline_caps.rotation_flags) { + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support rotation\n"); + return AVERROR(EINVAL); + } + + switch (ctx->rotation) { + case ROTATION_0: + vpp_ctx->rotation_state = VA_ROTATION_NONE; + break; + case ROTATION_90: + vpp_ctx->rotation_state = VA_ROTATION_90; + break; + case ROTATION_180: + vpp_ctx->rotation_state = VA_ROTATION_180; + break; + case ROTATION_270: + vpp_ctx->rotation_state = VA_ROTATION_270; + break; + default: + av_log(avctx, AV_LOG_ERROR, "Failed to set rotation_state to %d. " + "Clockwise %d, %d, %d and %d are only supported\n", + ctx->rotation, + ROTATION_0, ROTATION_90, ROTATION_180, ROTATION_270); + return AVERROR(EINVAL); + } + + support_flag = pipeline_caps.rotation_flags & + (1 << vpp_ctx->rotation_state); + if (!support_flag) { + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support %d\n", + ctx->rotation); + return AVERROR(EINVAL); + } + + return 0; +} + +static int rotation_vaapi_filter_frame(AVFilterLink *inlink, AVFrame *input_frame) +{ + AVFilterContext *avctx = inlink->dst; + AVFilterLink *outlink = avctx->outputs[0]; + VAAPIVPPContext *vpp_ctx = avctx->priv; + AVFrame *output_frame = NULL; + VASurfaceID input_surface, output_surface; + VARectangle input_region; + + VAProcPipelineParameterBuffer params; + int err; + + av_log(avctx, AV_LOG_DEBUG, "Filter input: %s, %ux%u (%"PRId64").\n", + av_get_pix_fmt_name(input_frame->format), + input_frame->width, input_frame->height, input_frame->pts); + + if (vpp_ctx->va_context == VA_INVALID_ID) + return AVERROR(EINVAL); + + input_surface = (VASurfaceID)(uintptr_t)input_frame->data[3]; + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp input.\n", + input_surface); + + output_frame = ff_get_video_buffer(outlink, vpp_ctx->output_width, + vpp_ctx->output_height); + if (!output_frame) { + err = AVERROR(ENOMEM); + goto fail; + } + + output_surface = (VASurfaceID)(uintptr_t)output_frame->data[3]; + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp output.\n", + output_surface); + memset(¶ms, 0, sizeof(params)); + input_region = (VARectangle) { + .x = 0, + .y = 0, + .width = input_frame->width, + .height = input_frame->height, + }; + + switch (vpp_ctx->rotation_state) { + case VA_ROTATION_NONE: + case VA_ROTATION_90: + case VA_ROTATION_180: + case VA_ROTATION_270: + params.rotation_state = vpp_ctx->rotation_state; + break; + default: + av_log(avctx, AV_LOG_ERROR, "VAAPI doesn't support %d\n", + vpp_ctx->rotation_state); + goto fail; + } + + if (vpp_ctx->nb_filter_buffers) { + params.filters = &vpp_ctx->filter_buffers[0]; + params.num_filters = vpp_ctx->nb_filter_buffers; + } + params.surface = input_surface; + params.surface_region = &input_region; + params.surface_color_standard = + ff_vaapi_vpp_colour_standard(input_frame->colorspace); + + params.output_region = NULL; + params.output_background_color = 0xff000000; + params.output_color_standard = params.surface_color_standard; + + params.pipeline_flags = 0; + params.filter_flags = VA_FRAME_PICTURE; + + err = ff_vaapi_vpp_render_picture(avctx, ¶ms, output_surface); + if (err < 0) + goto fail; + + err = av_frame_copy_props(output_frame, input_frame); + if (err < 0) + goto fail; + av_frame_free(&input_frame); + + av_log(avctx, AV_LOG_DEBUG, "Filter output: %s, %ux%u (%"PRId64").\n", + av_get_pix_fmt_name(output_frame->format), + output_frame->width, output_frame->height, output_frame->pts); + + return ff_filter_frame(outlink, output_frame); + +fail: + av_frame_free(&input_frame); + av_frame_free(&output_frame); + return err; +} + +static av_cold int rotation_vaapi_init(AVFilterContext *avctx) +{ + VAAPIVPPContext *vpp_ctx = avctx->priv; + + ff_vaapi_vpp_ctx_init(avctx); + vpp_ctx->pipeline_uninit = ff_vaapi_vpp_pipeline_uninit; + vpp_ctx->build_filter_params = rotation_vaapi_build_filter_params; + vpp_ctx->output_format = AV_PIX_FMT_NONE; + + return 0; +} + +#define ROFFSET(x) offsetof(RotationVAAPIContext, x) +#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM) +static const AVOption rotation_vaapi_options[] = { + { "angle", "set roation direction", ROFFSET(rotation), AV_OPT_TYPE_INT, { .i64 = ROTATION_MIN }, ROTATION_MIN, ROTATION_MAX, FLAGS, "angle" }, + { "clock_0", "rotate clockwise 0 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_0 }, .flags=FLAGS, .unit = "angle" }, + { "clock_90", "rotate clockwise 90 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_90}, .flags=FLAGS, .unit = "angle" }, + { "clock_180", "rotate clockwise 180 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_180 }, .flags=FLAGS, .unit = "angle" }, + { "clock_270", "rotate clockwise 270 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_270 }, .flags=FLAGS, .unit = "angle" }, + { NULL }, +}; + +AVFILTER_DEFINE_CLASS(rotation_vaapi); + +static const AVFilterPad rotation_vaapi_inputs[] = { + { + .name = "default", + .type = AVMEDIA_TYPE_VIDEO, + .filter_frame = &rotation_vaapi_filter_frame, + .config_props = &ff_vaapi_vpp_config_input, + }, + { NULL } +}; + +static const AVFilterPad rotation_vaapi_outputs[] = { + { + .name = "default", + .type = AVMEDIA_TYPE_VIDEO, + .config_props = &ff_vaapi_vpp_config_output, + }, + { NULL } +}; + +AVFilter ff_vf_rotation_vaapi = { + .name = "rotation_vaapi", + .description = NULL_IF_CONFIG_SMALL("VAAPI VPP for rotation"), + .priv_size = sizeof(RotationVAAPIContext), + .init = &rotation_vaapi_init, + .uninit = &ff_vaapi_vpp_ctx_uninit, + .query_formats = &ff_vaapi_vpp_query_formats, + .inputs = rotation_vaapi_inputs, + .outputs = rotation_vaapi_outputs, + .priv_class = &rotation_vaapi_class, + .flags_internal = FF_FILTER_FLAG_HWFRAME_AWARE, +};
It supports clockwise rotation by 0/90/180/270 degrees defined in va/va_vpp.h, tested following command line on SKL platform ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=angle=180" -c:v h264_vaapi output.h264 Signed-off-by: Zachary Zhou <zachary.zhou@intel.com> --- configure | 4 + libavfilter/Makefile | 1 + libavfilter/allfilters.c | 1 + libavfilter/vaapi_vpp.h | 1 + libavfilter/vf_rotate_vaapi.c | 252 ++++++++++++++++++++++++++++++++++ 5 files changed, 259 insertions(+) create mode 100644 libavfilter/vf_rotate_vaapi.c