diff mbox

[FFmpeg-devel,1/2] Revert "lavf/vf_vpp_qsv: add support for QSV transpose filter"

Message ID 1565188166-21108-1-git-send-email-zhong.li@intel.com
State New
Headers show

Commit Message

Zhong Li Aug. 7, 2019, 2:29 p.m. UTC
This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.

Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"
---
 libavfilter/vf_vpp_qsv.c | 101 +----------------------------------------------
 1 file changed, 2 insertions(+), 99 deletions(-)

Comments

Nicolas George Aug. 7, 2019, 2:31 p.m. UTC | #1
Zhong Li (12019-08-07):
> This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.
> 
> Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"

The damage to the git log is done, this will just make it worse, IMHO.

Regards,
Zhong Li Aug. 7, 2019, 2:34 p.m. UTC | #2
> From: Nicolas George [mailto:george@nsup.org]
> Sent: Wednesday, August 7, 2019 10:31 PM
> To: FFmpeg development discussions and patches
> <ffmpeg-devel@ffmpeg.org>
> Cc: Li, Zhong <zhong.li@intel.com>
> Subject: Re: [FFmpeg-devel] [PATCH 1/2] Revert "lavf/vf_vpp_qsv: add
> support for QSV transpose filter"
> 
> Zhong Li (12019-08-07):
> > This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.
> >
> > Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"
> 
> The damage to the git log is done, this will just make it worse, IMHO.
> 
> Regards,
> 
> --
>   Nicolas George

So your suggestion should be: just keep it and do nothing now?
Paul B Mahol Aug. 7, 2019, 2:34 p.m. UTC | #3
On Wed, Aug 7, 2019 at 4:31 PM Nicolas George <george@nsup.org> wrote:

> Zhong Li (12019-08-07):
> > This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.
> >
> > Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"
>
> The damage to the git log is done, this will just make it worse, IMHO.
>

Yes, completely agree.
Paul B Mahol Aug. 7, 2019, 2:36 p.m. UTC | #4
On Wed, Aug 7, 2019 at 4:34 PM Li, Zhong <zhong.li@intel.com> wrote:

> > From: Nicolas George [mailto:george@nsup.org]
> > Sent: Wednesday, August 7, 2019 10:31 PM
> > To: FFmpeg development discussions and patches
> > <ffmpeg-devel@ffmpeg.org>
> > Cc: Li, Zhong <zhong.li@intel.com>
> > Subject: Re: [FFmpeg-devel] [PATCH 1/2] Revert "lavf/vf_vpp_qsv: add
> > support for QSV transpose filter"
> >
> > Zhong Li (12019-08-07):
> > > This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.
> > >
> > > Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"
> >
> > The damage to the git log is done, this will just make it worse, IMHO.
> >
> > Regards,
> >
> > --
> >   Nicolas George
>
> So your suggestion should be: just keep it and do nothing now?


Please do nothing now, please do not forget it for next time, what is lavf
and what is lavfi.
Zhong Li Aug. 7, 2019, 2:38 p.m. UTC | #5
> From: ffmpeg-devel [mailto:ffmpeg-devel-bounces@ffmpeg.org] On Behalf

> Of Paul B Mahol

> Sent: Wednesday, August 7, 2019 10:36 PM

> To: FFmpeg development discussions and patches

> <ffmpeg-devel@ffmpeg.org>

> Subject: Re: [FFmpeg-devel] [PATCH 1/2] Revert "lavf/vf_vpp_qsv: add

> support for QSV transpose filter"

> 

> On Wed, Aug 7, 2019 at 4:34 PM Li, Zhong <zhong.li@intel.com> wrote:

> 

> > > From: Nicolas George [mailto:george@nsup.org]

> > > Sent: Wednesday, August 7, 2019 10:31 PM

> > > To: FFmpeg development discussions and patches

> > > <ffmpeg-devel@ffmpeg.org>

> > > Cc: Li, Zhong <zhong.li@intel.com>

> > > Subject: Re: [FFmpeg-devel] [PATCH 1/2] Revert "lavf/vf_vpp_qsv: add

> > > support for QSV transpose filter"

> > >

> > > Zhong Li (12019-08-07):

> > > > This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.

> > > >

> > > > Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"

> > >

> > > The damage to the git log is done, this will just make it worse, IMHO.

> > >

> > > Regards,

> > >

> > > --

> > >   Nicolas George

> >

> > So your suggestion should be: just keep it and do nothing now?

> 

> 

> Please do nothing now, please do not forget it for next time, what is lavf and

> what is lavfi.


Thanks for remind. Will take care of it next time.
Fu, Linjie Aug. 7, 2019, 3:14 p.m. UTC | #6
> -----Original Message-----

> From: ffmpeg-devel [mailto:ffmpeg-devel-bounces@ffmpeg.org] On Behalf

> Of Paul B Mahol

> Sent: Wednesday, August 7, 2019 22:36

> To: FFmpeg development discussions and patches <ffmpeg-

> devel@ffmpeg.org>

> Subject: Re: [FFmpeg-devel] [PATCH 1/2] Revert "lavf/vf_vpp_qsv: add

> support for QSV transpose filter"

> 

> On Wed, Aug 7, 2019 at 4:34 PM Li, Zhong <zhong.li@intel.com> wrote:

> 

> > > From: Nicolas George [mailto:george@nsup.org]

> > > Sent: Wednesday, August 7, 2019 10:31 PM

> > > To: FFmpeg development discussions and patches

> > > <ffmpeg-devel@ffmpeg.org>

> > > Cc: Li, Zhong <zhong.li@intel.com>

> > > Subject: Re: [FFmpeg-devel] [PATCH 1/2] Revert "lavf/vf_vpp_qsv: add

> > > support for QSV transpose filter"

> > >

> > > Zhong Li (12019-08-07):

> > > > This reverts commit af3ddd581faf2c3c4748ae589947c662b1a2271e.

> > > >

> > > > Revert it due to the uncorrect subject, should be: "lavf" -> "lavfi"

> > >

> > > The damage to the git log is done, this will just make it worse, IMHO.

> > >

> > > Regards,

> > >

> > > --

> > >   Nicolas George

> >

> > So your suggestion should be: just keep it and do nothing now?

> 

> 

> Please do nothing now, please do not forget it for next time, what is lavf

> and what is lavfi.


Thanks, will keep it in mind.
diff mbox

Patch

diff --git a/libavfilter/vf_vpp_qsv.c b/libavfilter/vf_vpp_qsv.c
index f185133..915cf74 100644
--- a/libavfilter/vf_vpp_qsv.c
+++ b/libavfilter/vf_vpp_qsv.c
@@ -36,15 +36,12 @@ 
 #include "libavformat/avformat.h"
 
 #include "qsvvpp.h"
-#include "transpose.h"
 
 #define OFFSET(x) offsetof(VPPContext, x)
 #define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM)
 
 /* number of video enhancement filters */
-#define ENH_FILTERS_COUNT (7)
-#define QSV_HAVE_ROTATION  QSV_VERSION_ATLEAST(1, 17)
-#define QSV_HAVE_MIRRORING QSV_VERSION_ATLEAST(1, 19)
+#define ENH_FILTERS_COUNT (5)
 
 typedef struct VPPContext{
     const AVClass *class;
@@ -57,8 +54,6 @@  typedef struct VPPContext{
     mfxExtVPPDenoise denoise_conf;
     mfxExtVPPDetail detail_conf;
     mfxExtVPPProcAmp procamp_conf;
-    mfxExtVPPRotation rotation_conf;
-    mfxExtVPPMirroring mirroring_conf;
 
     int out_width;
     int out_height;
@@ -79,10 +74,6 @@  typedef struct VPPContext{
     int crop_x;
     int crop_y;
 
-    int transpose;
-    int rotate;                 /* rotate angle : [0, 90, 180, 270] */
-    int hflip;                  /* flip mode : 0 = off, 1 = HORIZONTAL flip */
-
     /* param for the procamp */
     int    procamp;            /* enable procamp */
     float  hue;
@@ -109,15 +100,6 @@  static const AVOption options[] = {
     { "contrast",    "ProcAmp contrast",             OFFSET(contrast),    AV_OPT_TYPE_FLOAT,    { .dbl = 1.0 }, 0.0, 10.0, .flags = FLAGS},
     { "brightness",  "ProcAmp brightness",           OFFSET(brightness),  AV_OPT_TYPE_FLOAT,    { .dbl = 0.0 }, -100.0, 100.0, .flags = FLAGS},
 
-    { "transpose",  "set transpose direction",       OFFSET(transpose),   AV_OPT_TYPE_INT,      { .i64 = -1 }, -1, 6, FLAGS, "transpose"},
-        { "cclock_hflip",  "rotate counter-clockwise with horizontal flip",  0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_CCLOCK_FLIP }, .flags=FLAGS, .unit = "transpose" },
-        { "clock",         "rotate clockwise",                               0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_CLOCK       }, .flags=FLAGS, .unit = "transpose" },
-        { "cclock",        "rotate counter-clockwise",                       0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_CCLOCK      }, .flags=FLAGS, .unit = "transpose" },
-        { "clock_hflip",   "rotate clockwise with horizontal flip",          0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_CLOCK_FLIP  }, .flags=FLAGS, .unit = "transpose" },
-        { "reversal",      "rotate by half-turn",                            0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_REVERSAL    }, .flags=FLAGS, .unit = "transpose" },
-        { "hflip",         "flip horizontally",                              0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_HFLIP       }, .flags=FLAGS, .unit = "transpose" },
-        { "vflip",         "flip vertically",                                0, AV_OPT_TYPE_CONST, { .i64 = TRANSPOSE_VFLIP       }, .flags=FLAGS, .unit = "transpose" },
-
     { "cw",   "set the width crop area expression",   OFFSET(cw), AV_OPT_TYPE_STRING, { .str = "iw" }, CHAR_MIN, CHAR_MAX, FLAGS },
     { "ch",   "set the height crop area expression",  OFFSET(ch), AV_OPT_TYPE_STRING, { .str = "ih" }, CHAR_MIN, CHAR_MAX, FLAGS },
     { "cx",   "set the x crop area expression",       OFFSET(cx), AV_OPT_TYPE_STRING, { .str = "(in_w-out_w)/2" }, CHAR_MIN, CHAR_MAX, FLAGS },
@@ -374,87 +356,8 @@  static int config_output(AVFilterLink *outlink)
         param.ext_buf[param.num_ext_buf++] = (mfxExtBuffer*)&vpp->procamp_conf;
     }
 
-    if (vpp->transpose >= 0) {
-#ifdef QSV_HAVE_ROTATION
-        switch (vpp->transpose) {
-        case TRANSPOSE_CCLOCK_FLIP:
-            vpp->rotate = MFX_ANGLE_270;
-            vpp->hflip  = MFX_MIRRORING_HORIZONTAL;
-            break;
-        case TRANSPOSE_CLOCK:
-            vpp->rotate = MFX_ANGLE_90;
-            vpp->hflip  = MFX_MIRRORING_DISABLED;
-            break;
-        case TRANSPOSE_CCLOCK:
-            vpp->rotate = MFX_ANGLE_270;
-            vpp->hflip  = MFX_MIRRORING_DISABLED;
-            break;
-        case TRANSPOSE_CLOCK_FLIP:
-            vpp->rotate = MFX_ANGLE_90;
-            vpp->hflip  = MFX_MIRRORING_HORIZONTAL;
-            break;
-        case TRANSPOSE_REVERSAL:
-            vpp->rotate = MFX_ANGLE_180;
-            vpp->hflip  = MFX_MIRRORING_DISABLED;
-            break;
-        case TRANSPOSE_HFLIP:
-            vpp->rotate = MFX_ANGLE_0;
-            vpp->hflip  = MFX_MIRRORING_HORIZONTAL;
-            break;
-        case TRANSPOSE_VFLIP:
-            vpp->rotate = MFX_ANGLE_180;
-            vpp->hflip  = MFX_MIRRORING_HORIZONTAL;
-            break;
-        default:
-            av_log(ctx, AV_LOG_ERROR, "Failed to set transpose mode to %d.\n", vpp->transpose);
-            return AVERROR(EINVAL);
-        }
-#else
-        av_log(ctx, AV_LOG_WARNING, "The QSV VPP transpose option is "
-            "not supported with this MSDK version.\n");
-        vpp->transpose = 0;
-#endif
-    }
-
-    if (vpp->rotate) {
-#ifdef QSV_HAVE_ROTATION
-        memset(&vpp->rotation_conf, 0, sizeof(mfxExtVPPRotation));
-        vpp->rotation_conf.Header.BufferId  = MFX_EXTBUFF_VPP_ROTATION;
-        vpp->rotation_conf.Header.BufferSz  = sizeof(mfxExtVPPRotation);
-        vpp->rotation_conf.Angle = vpp->rotate;
-
-        if (MFX_ANGLE_90 == vpp->rotate || MFX_ANGLE_270 == vpp->rotate) {
-            FFSWAP(int, vpp->out_width, vpp->out_height);
-            FFSWAP(int, outlink->w, outlink->h);
-            av_log(ctx, AV_LOG_DEBUG, "Swap width and height for clock/cclock rotation.\n");
-        }
-
-        param.ext_buf[param.num_ext_buf++] = (mfxExtBuffer*)&vpp->rotation_conf;
-#else
-        av_log(ctx, AV_LOG_WARNING, "The QSV VPP rotate option is "
-            "not supported with this MSDK version.\n");
-        vpp->rotate = 0;
-#endif
-    }
-
-    if (vpp->hflip) {
-#ifdef QSV_HAVE_MIRRORING
-        memset(&vpp->mirroring_conf, 0, sizeof(mfxExtVPPMirroring));
-        vpp->mirroring_conf.Header.BufferId = MFX_EXTBUFF_VPP_MIRRORING;
-        vpp->mirroring_conf.Header.BufferSz = sizeof(mfxExtVPPMirroring);
-        vpp->mirroring_conf.Type = vpp->hflip;
-
-        param.ext_buf[param.num_ext_buf++] = (mfxExtBuffer*)&vpp->mirroring_conf;
-#else
-        av_log(ctx, AV_LOG_WARNING, "The QSV VPP hflip option is "
-            "not supported with this MSDK version.\n");
-        vpp->hflip = 0;
-#endif
-    }
-
     if (vpp->use_frc || vpp->use_crop || vpp->deinterlace || vpp->denoise ||
-        vpp->detail || vpp->procamp || vpp->rotate || vpp->hflip ||
-        inlink->w != outlink->w || inlink->h != outlink->h)
+        vpp->detail || vpp->procamp || inlink->w != outlink->w || inlink->h != outlink->h)
         return ff_qsvvpp_create(ctx, &vpp->qsv, &param);
     else {
         av_log(ctx, AV_LOG_VERBOSE, "qsv vpp pass through mode.\n");