Message ID | 20201222180920.11145-1-onemda@gmail.com |
---|---|
State | Superseded |
Headers | show |
Series | [FFmpeg-devel,RFC] libavformat: add librist protocol | expand |
Context | Check | Description |
---|---|---|
andriy/x86_make | success | Make finished |
andriy/x86_make_fate | success | Make fate finished |
andriy/PPC64_make | success | Make finished |
andriy/PPC64_make_fate | success | Make fate finished |
Dec 22, 2020, 19:09 by onemda@gmail.com: > Signed-off-by: Paul B Mahol <onemda@gmail.com> > + > +const URLProtocol ff_librist_protocol = { > + .name = "rist", > + .url_open = librist_open, > + .url_read = librist_read, > + .url_write = librist_write, > + .url_close = librist_close, > + .url_get_file_handle = librist_get_file_handle, > + .priv_data_size = sizeof(RISTContext), > + .flags = URL_PROTOCOL_FLAG_NETWORK, > + .priv_data_class = &librist_class, > +}; > I think this will be affected by the rtmp/librtmp issue we had, where both protocols shared a name and so couldn't be used alongside. So "librist" would be better as a name.
On Tue, Dec 22, 2020 at 9:15 PM Lynne <dev@lynne.ee> wrote: > Dec 22, 2020, 19:09 by onemda@gmail.com: > > > Signed-off-by: Paul B Mahol <onemda@gmail.com> > > + > > +const URLProtocol ff_librist_protocol = { > > + .name = "rist", > > + .url_open = librist_open, > > + .url_read = librist_read, > > + .url_write = librist_write, > > + .url_close = librist_close, > > + .url_get_file_handle = librist_get_file_handle, > > + .priv_data_size = sizeof(RISTContext), > > + .flags = URL_PROTOCOL_FLAG_NETWORK, > > + .priv_data_class = &librist_class, > > +}; > > > > I think this will be affected by the rtmp/librtmp issue we had, where both > protocols shared a name and so couldn't be used alongside. So "librist" > would be better as a name. > That would make this protocol implementation useless, as protocol is rist:// and not librist:// so would not automatically work iirc.
Hi, some feedback from one of the libRIST developers: Testing this patch (via diff found on:https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO buffer (which is limited to 1024 packets) causing it to overrun. Unfortunately libRIST had a bug where it kept incrementing the buffer counter indefinitely, this has now been fixed and it will log an error whenever this happens (which is very often with FFmpeg). FFmpeg will need to read the FIFO faster, by calling the librist_read function more often. If that's not possible within the design of FFmpeg the module can either: -use the callback (runs within a libRIST thread context) and store the data_block ptrs in a FIFO -dedicate a thread and store the data_block ptrs in a FIFO The librist_read function can then pop from the fifo, copy out the data, and free the block. Also I suggest to set the default loglevel at least to RIST_LOG_ERROR preferably at least to RIST_LOG_WARN. I'd also suggest changing the default buffer size and the min/max values, the unit is ms. I'd suggest a min of 1 (0 would select the default of libRIST -> 1000) a max somewhere far out enough but limited enough to prevent shooting in the foot (i.e.: 30 seconds worth) and a default of 1000. You can consider disabling advanced profile, libRIST limits profile to MAIN atm, and advanced will likely not be out (VSF spec) before summer (and quite likely much later). How does FFmpeg handle multiplexed streams from libRIST currently? This is not clear to me. I'd think at the very least FFmpeg would need to allow the user to filter to 1 stream based on the tunneled destination port number, as the RIST protocol allows multiple streams to be tunneled into 1 MAIN profile session. Personally I'd also like to be able to get the stats out of ffmpeg, an option for that would be very welcome (simply writing out to a file would be very helpful). Sincerely, Gijs Peskens On 22-12-2020 19:09, onemda at gmail.com (Paul B Mahol) wrote: > Signed-off-by: Paul B Mahol <onemda at gmail.com> > --- > TODO: > What about logging messages? > Return codes? > File handles? > Add support for password? > Advanced stuff? > > --- > configure | 5 ++ > libavformat/Makefile | 1 + > libavformat/librist.c | 164 ++++++++++++++++++++++++++++++++++++++++ > libavformat/protocols.c | 1 + > 4 files changed, 171 insertions(+) > create mode 100644 libavformat/librist.c > > diff --git a/configure b/configure > index 90914752f1..462f2dcf64 100755 > --- a/configure > +++ b/configure > @@ -259,6 +259,7 @@ External library support: > --enable-libpulse enable Pulseaudio input via libpulse [no] > --enable-librabbitmq enable RabbitMQ library [no] > --enable-librav1e enable AV1 encoding via rav1e [no] > + --enable-librist enable RIST via librist [no] > --enable-librsvg enable SVG rasterization via librsvg [no] > --enable-librubberband enable rubberband needed for rubberband filter [no] > --enable-librtmp enable RTMP[E] support via librtmp [no] > @@ -1797,6 +1798,7 @@ EXTERNAL_LIBRARY_LIST=" > libpulse > librabbitmq > librav1e > + librist > librsvg > librtmp > libshine > @@ -3488,6 +3490,8 @@ unix_protocol_select="network" > # external library protocols > libamqp_protocol_deps="librabbitmq" > libamqp_protocol_select="network" > +librist_protocol_deps="librist" > +librist_protocol_select="network" > librtmp_protocol_deps="librtmp" > librtmpe_protocol_deps="librtmp" > librtmps_protocol_deps="librtmp" > @@ -6404,6 +6408,7 @@ enabled libopus && { > enabled libpulse && require_pkg_config libpulse libpulse pulse/pulseaudio.h pa_context_new > enabled librabbitmq && require_pkg_config librabbitmq "librabbitmq >= 0.7.1" amqp.h amqp_new_connection > enabled librav1e && require_pkg_config librav1e "rav1e >= 0.1.0" rav1e.h rav1e_context_new > +enabled librist && require_pkg_config librist "librist >= 0.2" librist/librist.h rist_receiver_create > enabled librsvg && require_pkg_config librsvg librsvg-2.0 librsvg-2.0/librsvg/rsvg.h rsvg_handle_render_cairo > enabled librtmp && require_pkg_config librtmp librtmp librtmp/rtmp.h RTMP_Socket > enabled librubberband && require_pkg_config librubberband "rubberband >= 1.8.1" rubberband/rubberband-c.h rubberband_new -lstdc++ && append librubberband_extralibs "-lstdc++" > diff --git a/libavformat/Makefile b/libavformat/Makefile > index 97d868081b..799e16c59e 100644 > --- a/libavformat/Makefile > +++ b/libavformat/Makefile > @@ -652,6 +652,7 @@ OBJS-$(CONFIG_UNIX_PROTOCOL) += unix.o > > # external library protocols > OBJS-$(CONFIG_LIBAMQP_PROTOCOL) += libamqp.o > +OBJS-$(CONFIG_LIBRIST_PROTOCOL) += librist.o > OBJS-$(CONFIG_LIBRTMP_PROTOCOL) += librtmp.o > OBJS-$(CONFIG_LIBRTMPE_PROTOCOL) += librtmp.o > OBJS-$(CONFIG_LIBRTMPS_PROTOCOL) += librtmp.o > diff --git a/libavformat/librist.c b/libavformat/librist.c > new file mode 100644 > index 0000000000..b07f1ab673 > --- /dev/null > +++ b/libavformat/librist.c > @@ -0,0 +1,164 @@ > +/* > + * This file is part of FFmpeg. > + * > + * FFmpeg is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public > + * License as published by the Free Software Foundation; either > + * version 2.1 of the License, or (at your option) any later version. > + * > + * FFmpeg is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with FFmpeg; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA > + */ > + > +/** > + * @file > + * Reliable Internet Streaming Transport protocol > + */ > + > +#include "libavutil/avassert.h" > +#include "libavutil/opt.h" > +#include "libavutil/parseutils.h" > +#include "libavutil/time.h" > + > +#include "avformat.h" > +#include "internal.h" > +#include "network.h" > +#include "os_support.h" > +#include "url.h" > + > +#include <librist/librist.h> > + > +typedef struct RISTContext { > + const AVClass *class; > + int fd; > + > + int profile; > + > + const struct rist_peer_config *peer_config; > + struct rist_peer *peer; > + struct rist_ctx *rist_ctx; > +} RISTContext; > + > +#define D AV_OPT_FLAG_DECODING_PARAM > +#define E AV_OPT_FLAG_ENCODING_PARAM > +#define OFFSET(x) offsetof(RISTContext, x) > +static const AVOption librist_options[] = { > + { "profile", "set RIST profile", OFFSET(profile), AV_OPT_TYPE_INT, {.i64=RIST_PROFILE_SIMPLE}, 0, 2, .flags = D|E }, > + { NULL } > +}; > + > +static int librist_open(URLContext *h, const char *uri, int flags) > +{ > + RISTContext *s = h->priv_data; > + int ret; > + > + if (flags & AVIO_FLAG_WRITE) { > + ret = rist_sender_create(&s->rist_ctx, s->profile, 0, NULL); > + if (ret < 0) > + return ret; > + } else { > + ret = rist_receiver_create(&s->rist_ctx, s->profile, NULL); > + if (ret < 0) > + return ret; > + } > + > + ret = rist_parse_address(uri, &s->peer_config); > + if (ret < 0) > + return ret; > + > + ret = rist_peer_create(s->rist_ctx, &s->peer, s->peer_config); > + if (ret < 0) > + return ret; > + > + ret = rist_start(s->rist_ctx); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int librist_read(URLContext *h, uint8_t *buf, int size) > +{ > + RISTContext *s = h->priv_data; > + const struct rist_data_block *data_block; > + int ret; > + > + ret = rist_receiver_data_read(s->rist_ctx, &data_block, 5); > + if (ret < 0) > + return ret; > + > + if (ret > 0) { > + memcpy(buf, data_block->payload, data_block->payload_len); > + return data_block->payload_len; > + } > + > + return 0; > +} > + > +static int librist_write(URLContext *h, const uint8_t *buf, int size) > +{ > + RISTContext *s = h->priv_data; > + struct rist_data_block data_block = { 0 }; > + int ret; > + > + data_block.ts_ntp = 0; > + data_block.payload = buf; > + data_block.payload_len = size; > + ret = rist_sender_data_write(s->rist_ctx, &data_block); > + if (ret < 0) > + return ret; > + return size; // XXX should be ret actually but librist is buggy, got OOM otherwise > +} > + > +static int librist_close(URLContext *h) > +{ > + RISTContext *s = h->priv_data; > + int ret; > + > + free((void *)s->peer_config); > + s->peer_config = NULL; > + > + ret = rist_peer_destroy(s->rist_ctx, s->peer); > + if (ret < 0) > + return ret; > + s->peer = NULL; > + > + ret = rist_destroy(s->rist_ctx); > + if (ret < 0) > + return ret; > + s->rist_ctx = NULL; > + > + return 0; > +} > + > +static int librist_get_file_handle(URLContext *h) > +{ > + RISTContext *s = h->priv_data; > + > + return s->fd; > +} > + > +static const AVClass librist_class = { > + .class_name = "librist", > + .item_name = av_default_item_name, > + .option = librist_options, > + .version = LIBAVUTIL_VERSION_INT, > +}; > + > +const URLProtocol ff_librist_protocol = { > + .name = "rist", > + .url_open = librist_open, > + .url_read = librist_read, > + .url_write = librist_write, > + .url_close = librist_close, > + .url_get_file_handle = librist_get_file_handle, > + .priv_data_size = sizeof(RISTContext), > + .flags = URL_PROTOCOL_FLAG_NETWORK, > + .priv_data_class = &librist_class, > +}; > diff --git a/libavformat/protocols.c b/libavformat/protocols.c > index 7df18fbb3b..c4fc446bb6 100644 > --- a/libavformat/protocols.c > +++ b/libavformat/protocols.c > @@ -61,6 +61,7 @@ extern const URLProtocol ff_udp_protocol; > extern const URLProtocol ff_udplite_protocol; > extern const URLProtocol ff_unix_protocol; > extern const URLProtocol ff_libamqp_protocol; > +extern const URLProtocol ff_librist_protocol; > extern const URLProtocol ff_librtmp_protocol; > extern const URLProtocol ff_librtmpe_protocol; > extern const URLProtocol ff_librtmps_protocol;
On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> wrote: > Hi, some feedback from one of the libRIST developers: > > Testing this patch (via diff found > on: > https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ > ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO > buffer (which is limited to 1024 packets) causing it to overrun. > Unfortunately libRIST had a bug where it kept incrementing the buffer > counter indefinitely, this has now been fixed and it will log an error > whenever this happens (which is very often with FFmpeg). > FFmpeg will need to read the FIFO faster, by calling the librist_read > function more often. If that's not possible within the design of FFmpeg > the module can either: > Unfortunately some other devs disagree with initial patch and thus this issue. > -use the callback (runs within a libRIST thread context) and store the > data_block ptrs in a FIFO > That can not be used by FFmpeg API unfortunately. > -dedicate a thread and store the data_block ptrs in a FIFO > The librist_read function can then pop from the fifo, copy out the data, > and free the block. > > Also I suggest to set the default loglevel at least to RIST_LOG_ERROR > preferably at least to RIST_LOG_WARN. > > I'd also suggest changing the default buffer size and the min/max > values, the unit is ms. I'd suggest a min of 1 (0 would select the > default of libRIST -> 1000) a max somewhere far out enough but limited > enough to prevent shooting in the foot (i.e.: 30 seconds worth) and a > default of 1000. > > You can consider disabling advanced profile, libRIST limits profile to > MAIN atm, and advanced will likely not be out (VSF spec) before summer > (and quite likely much later). > > How does FFmpeg handle multiplexed streams from libRIST currently? This > is not clear to me. I'd think at the very least FFmpeg would need to > allow the user to filter to 1 stream based on the tunneled destination > port number, as the RIST protocol allows multiple streams to be tunneled > into 1 MAIN profile session. > > Personally I'd also like to be able to get the stats out of ffmpeg, an > option for that would be very welcome (simply writing out to a file > would be very helpful). > > > Sincerely, > > > Gijs Peskens > > On 22-12-2020 19:09, onemda at gmail.com (Paul B Mahol) wrote: > > Signed-off-by: Paul B Mahol <onemda at gmail.com> > > --- > > TODO: > > What about logging messages? > > Return codes? > > File handles? > > Add support for password? > > Advanced stuff? > > > > --- > > configure | 5 ++ > > libavformat/Makefile | 1 + > > libavformat/librist.c | 164 ++++++++++++++++++++++++++++++++++++++++ > > libavformat/protocols.c | 1 + > > 4 files changed, 171 insertions(+) > > create mode 100644 libavformat/librist.c > > > > diff --git a/configure b/configure > > index 90914752f1..462f2dcf64 100755 > > --- a/configure > > +++ b/configure > > @@ -259,6 +259,7 @@ External library support: > > --enable-libpulse enable Pulseaudio input via libpulse [no] > > --enable-librabbitmq enable RabbitMQ library [no] > > --enable-librav1e enable AV1 encoding via rav1e [no] > > + --enable-librist enable RIST via librist [no] > > --enable-librsvg enable SVG rasterization via librsvg [no] > > --enable-librubberband enable rubberband needed for rubberband > filter [no] > > --enable-librtmp enable RTMP[E] support via librtmp [no] > > @@ -1797,6 +1798,7 @@ EXTERNAL_LIBRARY_LIST=" > > libpulse > > librabbitmq > > librav1e > > + librist > > librsvg > > librtmp > > libshine > > @@ -3488,6 +3490,8 @@ unix_protocol_select="network" > > # external library protocols > > libamqp_protocol_deps="librabbitmq" > > libamqp_protocol_select="network" > > +librist_protocol_deps="librist" > > +librist_protocol_select="network" > > librtmp_protocol_deps="librtmp" > > librtmpe_protocol_deps="librtmp" > > librtmps_protocol_deps="librtmp" > > @@ -6404,6 +6408,7 @@ enabled libopus && { > > enabled libpulse && require_pkg_config libpulse libpulse > pulse/pulseaudio.h pa_context_new > > enabled librabbitmq && require_pkg_config librabbitmq > "librabbitmq >= 0.7.1" amqp.h amqp_new_connection > > enabled librav1e && require_pkg_config librav1e "rav1e >= > 0.1.0" rav1e.h rav1e_context_new > > +enabled librist && require_pkg_config librist "librist >= > 0.2" librist/librist.h rist_receiver_create > > enabled librsvg && require_pkg_config librsvg librsvg-2.0 > librsvg-2.0/librsvg/rsvg.h rsvg_handle_render_cairo > > enabled librtmp && require_pkg_config librtmp librtmp > librtmp/rtmp.h RTMP_Socket > > enabled librubberband && require_pkg_config librubberband > "rubberband >= 1.8.1" rubberband/rubberband-c.h rubberband_new -lstdc++ && > append librubberband_extralibs "-lstdc++" > > diff --git a/libavformat/Makefile b/libavformat/Makefile > > index 97d868081b..799e16c59e 100644 > > --- a/libavformat/Makefile > > +++ b/libavformat/Makefile > > @@ -652,6 +652,7 @@ OBJS-$(CONFIG_UNIX_PROTOCOL) += unix.o > > > > # external library protocols > > OBJS-$(CONFIG_LIBAMQP_PROTOCOL) += libamqp.o > > +OBJS-$(CONFIG_LIBRIST_PROTOCOL) += librist.o > > OBJS-$(CONFIG_LIBRTMP_PROTOCOL) += librtmp.o > > OBJS-$(CONFIG_LIBRTMPE_PROTOCOL) += librtmp.o > > OBJS-$(CONFIG_LIBRTMPS_PROTOCOL) += librtmp.o > > diff --git a/libavformat/librist.c b/libavformat/librist.c > > new file mode 100644 > > index 0000000000..b07f1ab673 > > --- /dev/null > > +++ b/libavformat/librist.c > > @@ -0,0 +1,164 @@ > > +/* > > + * This file is part of FFmpeg. > > + * > > + * FFmpeg is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU Lesser General Public > > + * License as published by the Free Software Foundation; either > > + * version 2.1 of the License, or (at your option) any later version. > > + * > > + * FFmpeg is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * Lesser General Public License for more details. > > + * > > + * You should have received a copy of the GNU Lesser General Public > > + * License along with FFmpeg; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > 02110-1301 USA > > + */ > > + > > +/** > > + * @file > > + * Reliable Internet Streaming Transport protocol > > + */ > > + > > +#include "libavutil/avassert.h" > > +#include "libavutil/opt.h" > > +#include "libavutil/parseutils.h" > > +#include "libavutil/time.h" > > + > > +#include "avformat.h" > > +#include "internal.h" > > +#include "network.h" > > +#include "os_support.h" > > +#include "url.h" > > + > > +#include <librist/librist.h> > > + > > +typedef struct RISTContext { > > + const AVClass *class; > > + int fd; > > + > > + int profile; > > + > > + const struct rist_peer_config *peer_config; > > + struct rist_peer *peer; > > + struct rist_ctx *rist_ctx; > > +} RISTContext; > > + > > +#define D AV_OPT_FLAG_DECODING_PARAM > > +#define E AV_OPT_FLAG_ENCODING_PARAM > > +#define OFFSET(x) offsetof(RISTContext, x) > > +static const AVOption librist_options[] = { > > + { "profile", "set RIST profile", OFFSET(profile), AV_OPT_TYPE_INT, > {.i64=RIST_PROFILE_SIMPLE}, 0, 2, .flags = D|E }, > > + { NULL } > > +}; > > + > > +static int librist_open(URLContext *h, const char *uri, int flags) > > +{ > > + RISTContext *s = h->priv_data; > > + int ret; > > + > > + if (flags & AVIO_FLAG_WRITE) { > > + ret = rist_sender_create(&s->rist_ctx, s->profile, 0, NULL); > > + if (ret < 0) > > + return ret; > > + } else { > > + ret = rist_receiver_create(&s->rist_ctx, s->profile, NULL); > > + if (ret < 0) > > + return ret; > > + } > > + > > + ret = rist_parse_address(uri, &s->peer_config); > > + if (ret < 0) > > + return ret; > > + > > + ret = rist_peer_create(s->rist_ctx, &s->peer, s->peer_config); > > + if (ret < 0) > > + return ret; > > + > > + ret = rist_start(s->rist_ctx); > > + if (ret < 0) > > + return ret; > > + > > + return 0; > > +} > > + > > +static int librist_read(URLContext *h, uint8_t *buf, int size) > > +{ > > + RISTContext *s = h->priv_data; > > + const struct rist_data_block *data_block; > > + int ret; > > + > > + ret = rist_receiver_data_read(s->rist_ctx, &data_block, 5); > > + if (ret < 0) > > + return ret; > > + > > + if (ret > 0) { > > + memcpy(buf, data_block->payload, data_block->payload_len); > > + return data_block->payload_len; > > + } > > + > > + return 0; > > +} > > + > > +static int librist_write(URLContext *h, const uint8_t *buf, int size) > > +{ > > + RISTContext *s = h->priv_data; > > + struct rist_data_block data_block = { 0 }; > > + int ret; > > + > > + data_block.ts_ntp = 0; > > + data_block.payload = buf; > > + data_block.payload_len = size; > > + ret = rist_sender_data_write(s->rist_ctx, &data_block); > > + if (ret < 0) > > + return ret; > > + return size; // XXX should be ret actually but librist is buggy, > got OOM otherwise > > +} > > + > > +static int librist_close(URLContext *h) > > +{ > > + RISTContext *s = h->priv_data; > > + int ret; > > + > > + free((void *)s->peer_config); > > + s->peer_config = NULL; > > + > > + ret = rist_peer_destroy(s->rist_ctx, s->peer); > > + if (ret < 0) > > + return ret; > > + s->peer = NULL; > > + > > + ret = rist_destroy(s->rist_ctx); > > + if (ret < 0) > > + return ret; > > + s->rist_ctx = NULL; > > + > > + return 0; > > +} > > + > > +static int librist_get_file_handle(URLContext *h) > > +{ > > + RISTContext *s = h->priv_data; > > + > > + return s->fd; > > +} > > + > > +static const AVClass librist_class = { > > + .class_name = "librist", > > + .item_name = av_default_item_name, > > + .option = librist_options, > > + .version = LIBAVUTIL_VERSION_INT, > > +}; > > + > > +const URLProtocol ff_librist_protocol = { > > + .name = "rist", > > + .url_open = librist_open, > > + .url_read = librist_read, > > + .url_write = librist_write, > > + .url_close = librist_close, > > + .url_get_file_handle = librist_get_file_handle, > > + .priv_data_size = sizeof(RISTContext), > > + .flags = URL_PROTOCOL_FLAG_NETWORK, > > + .priv_data_class = &librist_class, > > +}; > > diff --git a/libavformat/protocols.c b/libavformat/protocols.c > > index 7df18fbb3b..c4fc446bb6 100644 > > --- a/libavformat/protocols.c > > +++ b/libavformat/protocols.c > > @@ -61,6 +61,7 @@ extern const URLProtocol ff_udp_protocol; > > extern const URLProtocol ff_udplite_protocol; > > extern const URLProtocol ff_unix_protocol; > > extern const URLProtocol ff_libamqp_protocol; > > +extern const URLProtocol ff_librist_protocol; > > extern const URLProtocol ff_librtmp_protocol; > > extern const URLProtocol ff_librtmpe_protocol; > > extern const URLProtocol ff_librtmps_protocol; > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
Thanks for your swift reply! (and for your work on the patch, which I believe I forgot to thank you for) On 22-02-2021 09:17, Paul B Mahol wrote: > On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> wrote: > >> Hi, some feedback from one of the libRIST developers: >> >> Testing this patch (via diff found >> on: >> https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ >> ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO >> buffer (which is limited to 1024 packets) causing it to overrun. >> Unfortunately libRIST had a bug where it kept incrementing the buffer >> counter indefinitely, this has now been fixed and it will log an error >> whenever this happens (which is very often with FFmpeg). >> FFmpeg will need to read the FIFO faster, by calling the librist_read >> function more often. If that's not possible within the design of FFmpeg >> the module can either: >> > > Unfortunately some other devs disagree with initial patch and thus this > issue. I don't think this is as much a matter of opinion as it is a matter of fact ;) Right now we (libRIST) have the output FIFO limited to 1024 packets, I don't see that changing in the near future. Right now FFmpeg RIST input is simply broken, since the FIFO is overflowing repeatedly by as much as 5-600 packets. When the FIFO is full libRIST will (by design) free the oldest packet in it when adding a new packet to the FIFO, so reading it at a lower rate than packet insertion will inevitably lead to discontinuities, which RIST is supposed to prevent. So if the FIFO is to be used it /must/ be read at a rate high enough to prevent overflow. > >> -use the callback (runs within a libRIST thread context) and store the >> data_block ptrs in a FIFO >> > That can not be used by FFmpeg API unfortunately. > > >> -dedicate a thread and store the data_block ptrs in a FIFO >> The librist_read function can then pop from the fifo, copy out the data, >> and free the block. >> >> Also I suggest to set the default loglevel at least to RIST_LOG_ERROR >> preferably at least to RIST_LOG_WARN. >> >> I'd also suggest changing the default buffer size and the min/max >> values, the unit is ms. I'd suggest a min of 1 (0 would select the >> default of libRIST -> 1000) a max somewhere far out enough but limited >> enough to prevent shooting in the foot (i.e.: 30 seconds worth) and a >> default of 1000. >> >> You can consider disabling advanced profile, libRIST limits profile to >> MAIN atm, and advanced will likely not be out (VSF spec) before summer >> (and quite likely much later). >> >> How does FFmpeg handle multiplexed streams from libRIST currently? This >> is not clear to me. I'd think at the very least FFmpeg would need to >> allow the user to filter to 1 stream based on the tunneled destination >> port number, as the RIST protocol allows multiple streams to be tunneled >> into 1 MAIN profile session. >> >> Personally I'd also like to be able to get the stats out of ffmpeg, an >> option for that would be very welcome (simply writing out to a file >> would be very helpful). >> >> >> Sincerely, >> >> >> Gijs Peskens >> >> On 22-12-2020 19:09, onemda at gmail.com (Paul B Mahol) wrote: >>> Signed-off-by: Paul B Mahol <onemda at gmail.com> >>> --- >>> TODO: >>> What about logging messages? >>> Return codes? >>> File handles? >>> Add support for password? >>> Advanced stuff? >>> >>> --- >>> configure | 5 ++ >>> libavformat/Makefile | 1 + >>> libavformat/librist.c | 164 ++++++++++++++++++++++++++++++++++++++++ >>> libavformat/protocols.c | 1 + >>> 4 files changed, 171 insertions(+) >>> create mode 100644 libavformat/librist.c >>> >>> diff --git a/configure b/configure >>> index 90914752f1..462f2dcf64 100755 >>> --- a/configure >>> +++ b/configure >>> @@ -259,6 +259,7 @@ External library support: >>> --enable-libpulse enable Pulseaudio input via libpulse [no] >>> --enable-librabbitmq enable RabbitMQ library [no] >>> --enable-librav1e enable AV1 encoding via rav1e [no] >>> + --enable-librist enable RIST via librist [no] >>> --enable-librsvg enable SVG rasterization via librsvg [no] >>> --enable-librubberband enable rubberband needed for rubberband >> filter [no] >>> --enable-librtmp enable RTMP[E] support via librtmp [no] >>> @@ -1797,6 +1798,7 @@ EXTERNAL_LIBRARY_LIST=" >>> libpulse >>> librabbitmq >>> librav1e >>> + librist >>> librsvg >>> librtmp >>> libshine >>> @@ -3488,6 +3490,8 @@ unix_protocol_select="network" >>> # external library protocols >>> libamqp_protocol_deps="librabbitmq" >>> libamqp_protocol_select="network" >>> +librist_protocol_deps="librist" >>> +librist_protocol_select="network" >>> librtmp_protocol_deps="librtmp" >>> librtmpe_protocol_deps="librtmp" >>> librtmps_protocol_deps="librtmp" >>> @@ -6404,6 +6408,7 @@ enabled libopus && { >>> enabled libpulse && require_pkg_config libpulse libpulse >> pulse/pulseaudio.h pa_context_new >>> enabled librabbitmq && require_pkg_config librabbitmq >> "librabbitmq >= 0.7.1" amqp.h amqp_new_connection >>> enabled librav1e && require_pkg_config librav1e "rav1e >= >> 0.1.0" rav1e.h rav1e_context_new >>> +enabled librist && require_pkg_config librist "librist >= >> 0.2" librist/librist.h rist_receiver_create >>> enabled librsvg && require_pkg_config librsvg librsvg-2.0 >> librsvg-2.0/librsvg/rsvg.h rsvg_handle_render_cairo >>> enabled librtmp && require_pkg_config librtmp librtmp >> librtmp/rtmp.h RTMP_Socket >>> enabled librubberband && require_pkg_config librubberband >> "rubberband >= 1.8.1" rubberband/rubberband-c.h rubberband_new -lstdc++ && >> append librubberband_extralibs "-lstdc++" >>> diff --git a/libavformat/Makefile b/libavformat/Makefile >>> index 97d868081b..799e16c59e 100644 >>> --- a/libavformat/Makefile >>> +++ b/libavformat/Makefile >>> @@ -652,6 +652,7 @@ OBJS-$(CONFIG_UNIX_PROTOCOL) += unix.o >>> >>> # external library protocols >>> OBJS-$(CONFIG_LIBAMQP_PROTOCOL) += libamqp.o >>> +OBJS-$(CONFIG_LIBRIST_PROTOCOL) += librist.o >>> OBJS-$(CONFIG_LIBRTMP_PROTOCOL) += librtmp.o >>> OBJS-$(CONFIG_LIBRTMPE_PROTOCOL) += librtmp.o >>> OBJS-$(CONFIG_LIBRTMPS_PROTOCOL) += librtmp.o >>> diff --git a/libavformat/librist.c b/libavformat/librist.c >>> new file mode 100644 >>> index 0000000000..b07f1ab673 >>> --- /dev/null >>> +++ b/libavformat/librist.c >>> @@ -0,0 +1,164 @@ >>> +/* >>> + * This file is part of FFmpeg. >>> + * >>> + * FFmpeg is free software; you can redistribute it and/or >>> + * modify it under the terms of the GNU Lesser General Public >>> + * License as published by the Free Software Foundation; either >>> + * version 2.1 of the License, or (at your option) any later version. >>> + * >>> + * FFmpeg is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >>> + * Lesser General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU Lesser General Public >>> + * License along with FFmpeg; if not, write to the Free Software >>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA >> 02110-1301 USA >>> + */ >>> + >>> +/** >>> + * @file >>> + * Reliable Internet Streaming Transport protocol >>> + */ >>> + >>> +#include "libavutil/avassert.h" >>> +#include "libavutil/opt.h" >>> +#include "libavutil/parseutils.h" >>> +#include "libavutil/time.h" >>> + >>> +#include "avformat.h" >>> +#include "internal.h" >>> +#include "network.h" >>> +#include "os_support.h" >>> +#include "url.h" >>> + >>> +#include <librist/librist.h> >>> + >>> +typedef struct RISTContext { >>> + const AVClass *class; >>> + int fd; >>> + >>> + int profile; >>> + >>> + const struct rist_peer_config *peer_config; >>> + struct rist_peer *peer; >>> + struct rist_ctx *rist_ctx; >>> +} RISTContext; >>> + >>> +#define D AV_OPT_FLAG_DECODING_PARAM >>> +#define E AV_OPT_FLAG_ENCODING_PARAM >>> +#define OFFSET(x) offsetof(RISTContext, x) >>> +static const AVOption librist_options[] = { >>> + { "profile", "set RIST profile", OFFSET(profile), AV_OPT_TYPE_INT, >> {.i64=RIST_PROFILE_SIMPLE}, 0, 2, .flags = D|E }, >>> + { NULL } >>> +}; >>> + >>> +static int librist_open(URLContext *h, const char *uri, int flags) >>> +{ >>> + RISTContext *s = h->priv_data; >>> + int ret; >>> + >>> + if (flags & AVIO_FLAG_WRITE) { >>> + ret = rist_sender_create(&s->rist_ctx, s->profile, 0, NULL); >>> + if (ret < 0) >>> + return ret; >>> + } else { >>> + ret = rist_receiver_create(&s->rist_ctx, s->profile, NULL); >>> + if (ret < 0) >>> + return ret; >>> + } >>> + >>> + ret = rist_parse_address(uri, &s->peer_config); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = rist_peer_create(s->rist_ctx, &s->peer, s->peer_config); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = rist_start(s->rist_ctx); >>> + if (ret < 0) >>> + return ret; >>> + >>> + return 0; >>> +} >>> + >>> +static int librist_read(URLContext *h, uint8_t *buf, int size) >>> +{ >>> + RISTContext *s = h->priv_data; >>> + const struct rist_data_block *data_block; >>> + int ret; >>> + >>> + ret = rist_receiver_data_read(s->rist_ctx, &data_block, 5); >>> + if (ret < 0) >>> + return ret; >>> + >>> + if (ret > 0) { >>> + memcpy(buf, data_block->payload, data_block->payload_len); >>> + return data_block->payload_len; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static int librist_write(URLContext *h, const uint8_t *buf, int size) >>> +{ >>> + RISTContext *s = h->priv_data; >>> + struct rist_data_block data_block = { 0 }; >>> + int ret; >>> + >>> + data_block.ts_ntp = 0; >>> + data_block.payload = buf; >>> + data_block.payload_len = size; >>> + ret = rist_sender_data_write(s->rist_ctx, &data_block); >>> + if (ret < 0) >>> + return ret; >>> + return size; // XXX should be ret actually but librist is buggy, >> got OOM otherwise >>> +} >>> + >>> +static int librist_close(URLContext *h) >>> +{ >>> + RISTContext *s = h->priv_data; >>> + int ret; >>> + >>> + free((void *)s->peer_config); >>> + s->peer_config = NULL; >>> + >>> + ret = rist_peer_destroy(s->rist_ctx, s->peer); >>> + if (ret < 0) >>> + return ret; >>> + s->peer = NULL; >>> + >>> + ret = rist_destroy(s->rist_ctx); >>> + if (ret < 0) >>> + return ret; >>> + s->rist_ctx = NULL; >>> + >>> + return 0; >>> +} >>> + >>> +static int librist_get_file_handle(URLContext *h) >>> +{ >>> + RISTContext *s = h->priv_data; >>> + >>> + return s->fd; >>> +} >>> + >>> +static const AVClass librist_class = { >>> + .class_name = "librist", >>> + .item_name = av_default_item_name, >>> + .option = librist_options, >>> + .version = LIBAVUTIL_VERSION_INT, >>> +}; >>> + >>> +const URLProtocol ff_librist_protocol = { >>> + .name = "rist", >>> + .url_open = librist_open, >>> + .url_read = librist_read, >>> + .url_write = librist_write, >>> + .url_close = librist_close, >>> + .url_get_file_handle = librist_get_file_handle, >>> + .priv_data_size = sizeof(RISTContext), >>> + .flags = URL_PROTOCOL_FLAG_NETWORK, >>> + .priv_data_class = &librist_class, >>> +}; >>> diff --git a/libavformat/protocols.c b/libavformat/protocols.c >>> index 7df18fbb3b..c4fc446bb6 100644 >>> --- a/libavformat/protocols.c >>> +++ b/libavformat/protocols.c >>> @@ -61,6 +61,7 @@ extern const URLProtocol ff_udp_protocol; >>> extern const URLProtocol ff_udplite_protocol; >>> extern const URLProtocol ff_unix_protocol; >>> extern const URLProtocol ff_libamqp_protocol; >>> +extern const URLProtocol ff_librist_protocol; >>> extern const URLProtocol ff_librtmp_protocol; >>> extern const URLProtocol ff_librtmpe_protocol; >>> extern const URLProtocol ff_librtmps_protocol; >> _______________________________________________ >> ffmpeg-devel mailing list >> ffmpeg-devel@ffmpeg.org >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> >> To unsubscribe, visit link above, or email >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
On Mon, 22 Feb 2021, Gijs Peskens wrote: > Thanks for your swift reply! (and for your work on the patch, which I > believe I forgot to thank you for) > > On 22-02-2021 09:17, Paul B Mahol wrote: >> On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> wrote: >> >>> Hi, some feedback from one of the libRIST developers: >>> >>> Testing this patch (via diff found >>> on: >>> > https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ >>> ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO >>> buffer (which is limited to 1024 packets) causing it to overrun. >>> Unfortunately libRIST had a bug where it kept incrementing the buffer >>> counter indefinitely, this has now been fixed and it will log an error >>> whenever this happens (which is very often with FFmpeg). >>> FFmpeg will need to read the FIFO faster, by calling the librist_read >>> function more often. If that's not possible within the design of FFmpeg >>> the module can either: >>> >> >> Unfortunately some other devs disagree with initial patch and thus this >> issue. > I don't think this is as much a matter of opinion as it is a matter of > fact ;) Right now we (libRIST) have the output FIFO limited to 1024 > packets, I don't see that changing in the near future. Right now FFmpeg > RIST input is simply broken, since the FIFO is overflowing repeatedly by > as much as 5-600 packets. 1024*1316 bytes of FIFO buffer is plenty of data, it is 0.2 sec even at 50 Mbps. Maybe your output is blocking reading the input, and it is making ffmpeg operate slower than realtime. FFmpeg has a -thread_queue_size input option which you can use to buffer incoming packets using separate input reader thread, but as I said, you should look into what is going on exactly, and check if you can reproduce the drops with the null output, e.g.: ffmpeg -i rist://xxxx -f null none > When the FIFO is full libRIST will (by > design) free the oldest packet in it when adding a new packet to the > FIFO, so reading it at a lower rate than packet insertion will > inevitably lead to discontinuities, which RIST is supposed to prevent. > So if the FIFO is to be used it /must/ be read at a rate high enough to > prevent overflow. The obvious question is that why don't you make the fifo size configurable? What if somebody wants pump monstre 300 Mbps stream? With 1024 packets you get a FIFO size of 0.04 sec, which may not work reliably, even with a dedicated reader thread, if the CPU is loaded. Or am I missing something? >> >>> -use the callback (runs within a libRIST thread context) and store the >>> data_block ptrs in a FIFO >>> >> That can not be used by FFmpeg API unfortunately. >> >> >>> -dedicate a thread and store the data_block ptrs in a FIFO >>> The librist_read function can then pop from the fifo, copy out the data, >>> and free the block. We have the same for UDP, and it is misused by users a lot. Users are increasing the fifo size, when in fact they should be increasing the UDP socket buffer size. You are suggesting to have 2 fifos with threads and synchronization, and all that, when in fact we only need a single fifo in librist, but a bigger one than the default. Regards, Marton >>> >>> Also I suggest to set the default loglevel at least to RIST_LOG_ERROR >>> preferably at least to RIST_LOG_WARN. >>> >>> I'd also suggest changing the default buffer size and the min/max >>> values, the unit is ms. I'd suggest a min of 1 (0 would select the >>> default of libRIST -> 1000) a max somewhere far out enough but limited >>> enough to prevent shooting in the foot (i.e.: 30 seconds worth) and a >>> default of 1000. >>> >>> You can consider disabling advanced profile, libRIST limits profile to >>> MAIN atm, and advanced will likely not be out (VSF spec) before summer >>> (and quite likely much later). >>> >>> How does FFmpeg handle multiplexed streams from libRIST currently? This >>> is not clear to me. I'd think at the very least FFmpeg would need to >>> allow the user to filter to 1 stream based on the tunneled destination >>> port number, as the RIST protocol allows multiple streams to be tunneled >>> into 1 MAIN profile session. >>> >>> Personally I'd also like to be able to get the stats out of ffmpeg, an >>> option for that would be very welcome (simply writing out to a file >>> would be very helpful). >>> >>> >>> Sincerely, >>> >>> >>> Gijs Peskens >>> >>> On 22-12-2020 19:09, onemda at gmail.com (Paul B Mahol) wrote: >>>> Signed-off-by: Paul B Mahol <onemda at gmail.com> >>>> --- >>>> TODO: >>>> What about logging messages? >>>> Return codes? >>>> File handles? >>>> Add support for password? >>>> Advanced stuff? >>>> >>>> --- >>>> configure | 5 ++ >>>> libavformat/Makefile | 1 + >>>> libavformat/librist.c | 164 ++++++++++++++++++++++++++++++++++++++++ >>>> libavformat/protocols.c | 1 + >>>> 4 files changed, 171 insertions(+) >>>> create mode 100644 libavformat/librist.c >>>> >>>> diff --git a/configure b/configure >>>> index 90914752f1..462f2dcf64 100755 >>>> --- a/configure >>>> +++ b/configure >>>> @@ -259,6 +259,7 @@ External library support: >>>> --enable-libpulse enable Pulseaudio input via libpulse [no] >>>> --enable-librabbitmq enable RabbitMQ library [no] >>>> --enable-librav1e enable AV1 encoding via rav1e [no] >>>> + --enable-librist enable RIST via librist [no] >>>> --enable-librsvg enable SVG rasterization via librsvg [no] >>>> --enable-librubberband enable rubberband needed for rubberband >>> filter [no] >>>> --enable-librtmp enable RTMP[E] support via librtmp [no] >>>> @@ -1797,6 +1798,7 @@ EXTERNAL_LIBRARY_LIST=" >>>> libpulse >>>> librabbitmq >>>> librav1e >>>> + librist >>>> librsvg >>>> librtmp >>>> libshine >>>> @@ -3488,6 +3490,8 @@ unix_protocol_select="network" >>>> # external library protocols >>>> libamqp_protocol_deps="librabbitmq" >>>> libamqp_protocol_select="network" >>>> +librist_protocol_deps="librist" >>>> +librist_protocol_select="network" >>>> librtmp_protocol_deps="librtmp" >>>> librtmpe_protocol_deps="librtmp" >>>> librtmps_protocol_deps="librtmp" >>>> @@ -6404,6 +6408,7 @@ enabled libopus && { >>>> enabled libpulse && require_pkg_config libpulse libpulse >>> pulse/pulseaudio.h pa_context_new >>>> enabled librabbitmq && require_pkg_config librabbitmq >>> "librabbitmq >= 0.7.1" amqp.h amqp_new_connection >>>> enabled librav1e && require_pkg_config librav1e "rav1e >= >>> 0.1.0" rav1e.h rav1e_context_new >>>> +enabled librist && require_pkg_config librist "librist >= >>> 0.2" librist/librist.h rist_receiver_create >>>> enabled librsvg && require_pkg_config librsvg librsvg-2.0 >>> librsvg-2.0/librsvg/rsvg.h rsvg_handle_render_cairo >>>> enabled librtmp && require_pkg_config librtmp librtmp >>> librtmp/rtmp.h RTMP_Socket >>>> enabled librubberband && require_pkg_config librubberband >>> "rubberband >= 1.8.1" rubberband/rubberband-c.h rubberband_new -lstdc++ && >>> append librubberband_extralibs "-lstdc++" >>>> diff --git a/libavformat/Makefile b/libavformat/Makefile >>>> index 97d868081b..799e16c59e 100644 >>>> --- a/libavformat/Makefile >>>> +++ b/libavformat/Makefile >>>> @@ -652,6 +652,7 @@ OBJS-$(CONFIG_UNIX_PROTOCOL) += unix.o >>>> >>>> # external library protocols >>>> OBJS-$(CONFIG_LIBAMQP_PROTOCOL) += libamqp.o >>>> +OBJS-$(CONFIG_LIBRIST_PROTOCOL) += librist.o >>>> OBJS-$(CONFIG_LIBRTMP_PROTOCOL) += librtmp.o >>>> OBJS-$(CONFIG_LIBRTMPE_PROTOCOL) += librtmp.o >>>> OBJS-$(CONFIG_LIBRTMPS_PROTOCOL) += librtmp.o >>>> diff --git a/libavformat/librist.c b/libavformat/librist.c >>>> new file mode 100644 >>>> index 0000000000..b07f1ab673 >>>> --- /dev/null >>>> +++ b/libavformat/librist.c >>>> @@ -0,0 +1,164 @@ >>>> +/* >>>> + * This file is part of FFmpeg. >>>> + * >>>> + * FFmpeg is free software; you can redistribute it and/or >>>> + * modify it under the terms of the GNU Lesser General Public >>>> + * License as published by the Free Software Foundation; either >>>> + * version 2.1 of the License, or (at your option) any later version. >>>> + * >>>> + * FFmpeg is distributed in the hope that it will be useful, >>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >>>> + * Lesser General Public License for more details. >>>> + * >>>> + * You should have received a copy of the GNU Lesser General Public >>>> + * License along with FFmpeg; if not, write to the Free Software >>>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA >>> 02110-1301 USA >>>> + */ >>>> + >>>> +/** >>>> + * @file >>>> + * Reliable Internet Streaming Transport protocol >>>> + */ >>>> + >>>> +#include "libavutil/avassert.h" >>>> +#include "libavutil/opt.h" >>>> +#include "libavutil/parseutils.h" >>>> +#include "libavutil/time.h" >>>> + >>>> +#include "avformat.h" >>>> +#include "internal.h" >>>> +#include "network.h" >>>> +#include "os_support.h" >>>> +#include "url.h" >>>> + >>>> +#include <librist/librist.h> >>>> + >>>> +typedef struct RISTContext { >>>> + const AVClass *class; >>>> + int fd; >>>> + >>>> + int profile; >>>> + >>>> + const struct rist_peer_config *peer_config; >>>> + struct rist_peer *peer; >>>> + struct rist_ctx *rist_ctx; >>>> +} RISTContext; >>>> + >>>> +#define D AV_OPT_FLAG_DECODING_PARAM >>>> +#define E AV_OPT_FLAG_ENCODING_PARAM >>>> +#define OFFSET(x) offsetof(RISTContext, x) >>>> +static const AVOption librist_options[] = { >>>> + { "profile", "set RIST profile", OFFSET(profile), AV_OPT_TYPE_INT, >>> {.i64=RIST_PROFILE_SIMPLE}, 0, 2, .flags = D|E }, >>>> + { NULL } >>>> +}; >>>> + >>>> +static int librist_open(URLContext *h, const char *uri, int flags) >>>> +{ >>>> + RISTContext *s = h->priv_data; >>>> + int ret; >>>> + >>>> + if (flags & AVIO_FLAG_WRITE) { >>>> + ret = rist_sender_create(&s->rist_ctx, s->profile, 0, NULL); >>>> + if (ret < 0) >>>> + return ret; >>>> + } else { >>>> + ret = rist_receiver_create(&s->rist_ctx, s->profile, NULL); >>>> + if (ret < 0) >>>> + return ret; >>>> + } >>>> + >>>> + ret = rist_parse_address(uri, &s->peer_config); >>>> + if (ret < 0) >>>> + return ret; >>>> + >>>> + ret = rist_peer_create(s->rist_ctx, &s->peer, s->peer_config); >>>> + if (ret < 0) >>>> + return ret; >>>> + >>>> + ret = rist_start(s->rist_ctx); >>>> + if (ret < 0) >>>> + return ret; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int librist_read(URLContext *h, uint8_t *buf, int size) >>>> +{ >>>> + RISTContext *s = h->priv_data; >>>> + const struct rist_data_block *data_block; >>>> + int ret; >>>> + >>>> + ret = rist_receiver_data_read(s->rist_ctx, &data_block, 5); >>>> + if (ret < 0) >>>> + return ret; >>>> + >>>> + if (ret > 0) { >>>> + memcpy(buf, data_block->payload, data_block->payload_len); >>>> + return data_block->payload_len; >>>> + } >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int librist_write(URLContext *h, const uint8_t *buf, int size) >>>> +{ >>>> + RISTContext *s = h->priv_data; >>>> + struct rist_data_block data_block = { 0 }; >>>> + int ret; >>>> + >>>> + data_block.ts_ntp = 0; >>>> + data_block.payload = buf; >>>> + data_block.payload_len = size; >>>> + ret = rist_sender_data_write(s->rist_ctx, &data_block); >>>> + if (ret < 0) >>>> + return ret; >>>> + return size; // XXX should be ret actually but librist is buggy, >>> got OOM otherwise >>>> +} >>>> + >>>> +static int librist_close(URLContext *h) >>>> +{ >>>> + RISTContext *s = h->priv_data; >>>> + int ret; >>>> + >>>> + free((void *)s->peer_config); >>>> + s->peer_config = NULL; >>>> + >>>> + ret = rist_peer_destroy(s->rist_ctx, s->peer); >>>> + if (ret < 0) >>>> + return ret; >>>> + s->peer = NULL; >>>> + >>>> + ret = rist_destroy(s->rist_ctx); >>>> + if (ret < 0) >>>> + return ret; >>>> + s->rist_ctx = NULL; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int librist_get_file_handle(URLContext *h) >>>> +{ >>>> + RISTContext *s = h->priv_data; >>>> + >>>> + return s->fd; >>>> +} >>>> + >>>> +static const AVClass librist_class = { >>>> + .class_name = "librist", >>>> + .item_name = av_default_item_name, >>>> + .option = librist_options, >>>> + .version = LIBAVUTIL_VERSION_INT, >>>> +}; >>>> + >>>> +const URLProtocol ff_librist_protocol = { >>>> + .name = "rist", >>>> + .url_open = librist_open, >>>> + .url_read = librist_read, >>>> + .url_write = librist_write, >>>> + .url_close = librist_close, >>>> + .url_get_file_handle = librist_get_file_handle, >>>> + .priv_data_size = sizeof(RISTContext), >>>> + .flags = URL_PROTOCOL_FLAG_NETWORK, >>>> + .priv_data_class = &librist_class, >>>> +}; >>>> diff --git a/libavformat/protocols.c b/libavformat/protocols.c >>>> index 7df18fbb3b..c4fc446bb6 100644 >>>> --- a/libavformat/protocols.c >>>> +++ b/libavformat/protocols.c >>>> @@ -61,6 +61,7 @@ extern const URLProtocol ff_udp_protocol; >>>> extern const URLProtocol ff_udplite_protocol; >>>> extern const URLProtocol ff_unix_protocol; >>>> extern const URLProtocol ff_libamqp_protocol; >>>> +extern const URLProtocol ff_librist_protocol; >>>> extern const URLProtocol ff_librtmp_protocol; >>>> extern const URLProtocol ff_librtmpe_protocol; >>>> extern const URLProtocol ff_librtmps_protocol; >>> _______________________________________________ >>> ffmpeg-devel mailing list >>> ffmpeg-devel@ffmpeg.org >>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >>> >>> To unsubscribe, visit link above, or email >>> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> _______________________________________________ >> ffmpeg-devel mailing list >> ffmpeg-devel@ffmpeg.org >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> >> To unsubscribe, visit link above, or email >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
On Mon, 22 Feb 2021, Paul B Mahol wrote: > On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> wrote: > >> Hi, some feedback from one of the libRIST developers: >> >> Testing this patch (via diff found >> on: >> https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ >> ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO >> buffer (which is limited to 1024 packets) causing it to overrun. >> Unfortunately libRIST had a bug where it kept incrementing the buffer >> counter indefinitely, this has now been fixed and it will log an error >> whenever this happens (which is very often with FFmpeg). >> FFmpeg will need to read the FIFO faster, by calling the librist_read >> function more often. If that's not possible within the design of FFmpeg >> the module can either: >> > > > Unfortunately some other devs disagree with initial patch and thus this > issue. Could you pinpoint which change/discussion are you referring to here? Thanks, Marton
On Mon, Feb 22, 2021 at 8:27 PM Marton Balint <cus@passwd.hu> wrote: > > > On Mon, 22 Feb 2021, Paul B Mahol wrote: > > > On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> wrote: > > > >> Hi, some feedback from one of the libRIST developers: > >> > >> Testing this patch (via diff found > >> on: > >> > https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ > >> ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO > >> buffer (which is limited to 1024 packets) causing it to overrun. > >> Unfortunately libRIST had a bug where it kept incrementing the buffer > >> counter indefinitely, this has now been fixed and it will log an error > >> whenever this happens (which is very often with FFmpeg). > >> FFmpeg will need to read the FIFO faster, by calling the librist_read > >> function more often. If that's not possible within the design of FFmpeg > >> the module can either: > >> > > > > > > Unfortunately some other devs disagree with initial patch and thus this > > issue. > > Could you pinpoint which change/discussion are you referring to here? > > Probably one that is about longer polling time.. Thanks, > Marton > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
On Mon, 22 Feb 2021, Paul B Mahol wrote: > On Mon, Feb 22, 2021 at 8:27 PM Marton Balint <cus@passwd.hu> wrote: > >> >> >> On Mon, 22 Feb 2021, Paul B Mahol wrote: >> >> > On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> wrote: >> > >> >> Hi, some feedback from one of the libRIST developers: >> >> >> >> Testing this patch (via diff found >> >> on: >> >> >> https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ >> >> ) I've noticed FFmpeg is not reading fast enough from the libRIST FIFO >> >> buffer (which is limited to 1024 packets) causing it to overrun. >> >> Unfortunately libRIST had a bug where it kept incrementing the buffer >> >> counter indefinitely, this has now been fixed and it will log an error >> >> whenever this happens (which is very often with FFmpeg). >> >> FFmpeg will need to read the FIFO faster, by calling the librist_read >> >> function more often. If that's not possible within the design of FFmpeg >> >> the module can either: >> >> >> > >> > >> > Unfortunately some other devs disagree with initial patch and thus this >> > issue. >> >> Could you pinpoint which change/discussion are you referring to here? >> >> > Probably one that is about longer polling time.. I don't see how a larger polling time can cause such issue, unless something is very buggy. If there are queued packers in the fifo, rist_receiver_data_read should return immediately regardless of the polling time. Regards, Marton
On Mon, Feb 22, 2021 at 11:02 PM Marton Balint <cus@passwd.hu> wrote: > > > On Mon, 22 Feb 2021, Paul B Mahol wrote: > > > On Mon, Feb 22, 2021 at 8:27 PM Marton Balint <cus@passwd.hu> wrote: > > > >> > >> > >> On Mon, 22 Feb 2021, Paul B Mahol wrote: > >> > >> > On Mon, Feb 22, 2021 at 9:10 AM Gijs Peskens <gijs@peskens.net> > wrote: > >> > > >> >> Hi, some feedback from one of the libRIST developers: > >> >> > >> >> Testing this patch (via diff found > >> >> on: > >> >> > >> > https://patchwork.ffmpeg.org/project/ffmpeg/patch/20210126205145.20448-1-onemda@gmail.com/ > >> >> ) I've noticed FFmpeg is not reading fast enough from the libRIST > FIFO > >> >> buffer (which is limited to 1024 packets) causing it to overrun. > >> >> Unfortunately libRIST had a bug where it kept incrementing the buffer > >> >> counter indefinitely, this has now been fixed and it will log an > error > >> >> whenever this happens (which is very often with FFmpeg). > >> >> FFmpeg will need to read the FIFO faster, by calling the librist_read > >> >> function more often. If that's not possible within the design of > FFmpeg > >> >> the module can either: > >> >> > >> > > >> > > >> > Unfortunately some other devs disagree with initial patch and thus > this > >> > issue. > >> > >> Could you pinpoint which change/discussion are you referring to here? > >> > >> > > Probably one that is about longer polling time.. > > I don't see how a larger polling time can cause such issue, unless > something is very buggy. If there are queued packers in the fifo, > rist_receiver_data_read should return immediately regardless of the > polling time. > What about using some kind of for loop when reading? > > Regards, > Marton > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
diff --git a/configure b/configure index 90914752f1..462f2dcf64 100755 --- a/configure +++ b/configure @@ -259,6 +259,7 @@ External library support: --enable-libpulse enable Pulseaudio input via libpulse [no] --enable-librabbitmq enable RabbitMQ library [no] --enable-librav1e enable AV1 encoding via rav1e [no] + --enable-librist enable RIST via librist [no] --enable-librsvg enable SVG rasterization via librsvg [no] --enable-librubberband enable rubberband needed for rubberband filter [no] --enable-librtmp enable RTMP[E] support via librtmp [no] @@ -1797,6 +1798,7 @@ EXTERNAL_LIBRARY_LIST=" libpulse librabbitmq librav1e + librist librsvg librtmp libshine @@ -3488,6 +3490,8 @@ unix_protocol_select="network" # external library protocols libamqp_protocol_deps="librabbitmq" libamqp_protocol_select="network" +librist_protocol_deps="librist" +librist_protocol_select="network" librtmp_protocol_deps="librtmp" librtmpe_protocol_deps="librtmp" librtmps_protocol_deps="librtmp" @@ -6404,6 +6408,7 @@ enabled libopus && { enabled libpulse && require_pkg_config libpulse libpulse pulse/pulseaudio.h pa_context_new enabled librabbitmq && require_pkg_config librabbitmq "librabbitmq >= 0.7.1" amqp.h amqp_new_connection enabled librav1e && require_pkg_config librav1e "rav1e >= 0.1.0" rav1e.h rav1e_context_new +enabled librist && require_pkg_config librist "librist >= 0.2" librist/librist.h rist_receiver_create enabled librsvg && require_pkg_config librsvg librsvg-2.0 librsvg-2.0/librsvg/rsvg.h rsvg_handle_render_cairo enabled librtmp && require_pkg_config librtmp librtmp librtmp/rtmp.h RTMP_Socket enabled librubberband && require_pkg_config librubberband "rubberband >= 1.8.1" rubberband/rubberband-c.h rubberband_new -lstdc++ && append librubberband_extralibs "-lstdc++" diff --git a/libavformat/Makefile b/libavformat/Makefile index 97d868081b..799e16c59e 100644 --- a/libavformat/Makefile +++ b/libavformat/Makefile @@ -652,6 +652,7 @@ OBJS-$(CONFIG_UNIX_PROTOCOL) += unix.o # external library protocols OBJS-$(CONFIG_LIBAMQP_PROTOCOL) += libamqp.o +OBJS-$(CONFIG_LIBRIST_PROTOCOL) += librist.o OBJS-$(CONFIG_LIBRTMP_PROTOCOL) += librtmp.o OBJS-$(CONFIG_LIBRTMPE_PROTOCOL) += librtmp.o OBJS-$(CONFIG_LIBRTMPS_PROTOCOL) += librtmp.o diff --git a/libavformat/librist.c b/libavformat/librist.c new file mode 100644 index 0000000000..b07f1ab673 --- /dev/null +++ b/libavformat/librist.c @@ -0,0 +1,164 @@ +/* + * This file is part of FFmpeg. + * + * FFmpeg is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * FFmpeg is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with FFmpeg; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * Reliable Internet Streaming Transport protocol + */ + +#include "libavutil/avassert.h" +#include "libavutil/opt.h" +#include "libavutil/parseutils.h" +#include "libavutil/time.h" + +#include "avformat.h" +#include "internal.h" +#include "network.h" +#include "os_support.h" +#include "url.h" + +#include <librist/librist.h> + +typedef struct RISTContext { + const AVClass *class; + int fd; + + int profile; + + const struct rist_peer_config *peer_config; + struct rist_peer *peer; + struct rist_ctx *rist_ctx; +} RISTContext; + +#define D AV_OPT_FLAG_DECODING_PARAM +#define E AV_OPT_FLAG_ENCODING_PARAM +#define OFFSET(x) offsetof(RISTContext, x) +static const AVOption librist_options[] = { + { "profile", "set RIST profile", OFFSET(profile), AV_OPT_TYPE_INT, {.i64=RIST_PROFILE_SIMPLE}, 0, 2, .flags = D|E }, + { NULL } +}; + +static int librist_open(URLContext *h, const char *uri, int flags) +{ + RISTContext *s = h->priv_data; + int ret; + + if (flags & AVIO_FLAG_WRITE) { + ret = rist_sender_create(&s->rist_ctx, s->profile, 0, NULL); + if (ret < 0) + return ret; + } else { + ret = rist_receiver_create(&s->rist_ctx, s->profile, NULL); + if (ret < 0) + return ret; + } + + ret = rist_parse_address(uri, &s->peer_config); + if (ret < 0) + return ret; + + ret = rist_peer_create(s->rist_ctx, &s->peer, s->peer_config); + if (ret < 0) + return ret; + + ret = rist_start(s->rist_ctx); + if (ret < 0) + return ret; + + return 0; +} + +static int librist_read(URLContext *h, uint8_t *buf, int size) +{ + RISTContext *s = h->priv_data; + const struct rist_data_block *data_block; + int ret; + + ret = rist_receiver_data_read(s->rist_ctx, &data_block, 5); + if (ret < 0) + return ret; + + if (ret > 0) { + memcpy(buf, data_block->payload, data_block->payload_len); + return data_block->payload_len; + } + + return 0; +} + +static int librist_write(URLContext *h, const uint8_t *buf, int size) +{ + RISTContext *s = h->priv_data; + struct rist_data_block data_block = { 0 }; + int ret; + + data_block.ts_ntp = 0; + data_block.payload = buf; + data_block.payload_len = size; + ret = rist_sender_data_write(s->rist_ctx, &data_block); + if (ret < 0) + return ret; + return size; // XXX should be ret actually but librist is buggy, got OOM otherwise +} + +static int librist_close(URLContext *h) +{ + RISTContext *s = h->priv_data; + int ret; + + free((void *)s->peer_config); + s->peer_config = NULL; + + ret = rist_peer_destroy(s->rist_ctx, s->peer); + if (ret < 0) + return ret; + s->peer = NULL; + + ret = rist_destroy(s->rist_ctx); + if (ret < 0) + return ret; + s->rist_ctx = NULL; + + return 0; +} + +static int librist_get_file_handle(URLContext *h) +{ + RISTContext *s = h->priv_data; + + return s->fd; +} + +static const AVClass librist_class = { + .class_name = "librist", + .item_name = av_default_item_name, + .option = librist_options, + .version = LIBAVUTIL_VERSION_INT, +}; + +const URLProtocol ff_librist_protocol = { + .name = "rist", + .url_open = librist_open, + .url_read = librist_read, + .url_write = librist_write, + .url_close = librist_close, + .url_get_file_handle = librist_get_file_handle, + .priv_data_size = sizeof(RISTContext), + .flags = URL_PROTOCOL_FLAG_NETWORK, + .priv_data_class = &librist_class, +}; diff --git a/libavformat/protocols.c b/libavformat/protocols.c index 7df18fbb3b..c4fc446bb6 100644 --- a/libavformat/protocols.c +++ b/libavformat/protocols.c @@ -61,6 +61,7 @@ extern const URLProtocol ff_udp_protocol; extern const URLProtocol ff_udplite_protocol; extern const URLProtocol ff_unix_protocol; extern const URLProtocol ff_libamqp_protocol; +extern const URLProtocol ff_librist_protocol; extern const URLProtocol ff_librtmp_protocol; extern const URLProtocol ff_librtmpe_protocol; extern const URLProtocol ff_librtmps_protocol;
Signed-off-by: Paul B Mahol <onemda@gmail.com> --- TODO: What about logging messages? Return codes? File handles? Add support for password? Advanced stuff? --- configure | 5 ++ libavformat/Makefile | 1 + libavformat/librist.c | 164 ++++++++++++++++++++++++++++++++++++++++ libavformat/protocols.c | 1 + 4 files changed, 171 insertions(+) create mode 100644 libavformat/librist.c