Message ID | CAFWZL8qpn_+ehMrexRg+J8TQqjKZxBES7SKMwQjfW0vS3vHWMg@mail.gmail.com |
---|---|
State | New |
Headers | show |
Series | [FFmpeg-devel,v2] vaapi: support VAProfileH264High10 | expand |
Context | Check | Description |
---|---|---|
andriy/configure_x86 | warning | Failed to apply patch |
On Di, 2022-12-27 at 11:12 +0800, Jianfeng Zheng wrote: > see https://github.com/intel/libva/pull/664 > > Signed-off-by: jianfeng.zheng <jianfeng.zheng@mthreads.com> > --- > configure | 13 +++++++++++++ > libavcodec/h264_slice.c | 6 ++++++ > libavcodec/vaapi_decode.c | 10 ++++++++++ > libavcodec/vaapi_encode_h264.c | 24 ++++++++++++++++++++++-- > libavcodec/vaapi_h264.c | 5 +++-- > 5 files changed, 54 insertions(+), 4 deletions(-) > > diff --git a/configure b/configure > index f08cdab3d1..ac199d97cb 100755 > --- a/configure > +++ b/configure > @@ -2410,6 +2410,7 @@ HAVE_LIST=" > texi2html > xmllint > zlib_gzip > + va_profile_h264_high10 > " > > # options emitted with CONFIG_ prefix but not available on the command line > @@ -6958,6 +6959,18 @@ if enabled vaapi; then > check_type "va/va.h va/va_enc_jpeg.h" "VAEncPictureParameterBufferJPEG" > check_type "va/va.h va/va_enc_vp8.h" "VAEncPictureParameterBufferVP8" > check_type "va/va.h va/va_enc_vp9.h" "VAEncPictureParameterBufferVP9" > + > + # > + # Using 'VA_CHECK_VERSION' in source codes make things easy. But > we have to wait > + # until newly added VAProfile being distributed by VAAPI released > version. > + # > + # Before or after that, we can use auto-detection to keep version > compatibility. > + # It always works. > + # > + disable va_profile_h264_high10 && enabled h264_vaapi_hwaccel > + test_code cc va/va.h "VAProfile p = VAProfileH264High10" && > + enable va_profile_h264_high10 > + I think we should wait for a new VA-API version, otherwise it is meaningless to merge this patch without vaapi support. > fi > > if enabled_all opencl libdrm ; then > diff --git a/libavcodec/h264_slice.c b/libavcodec/h264_slice.c > index 420758ba0a..b9236281b1 100644 > --- a/libavcodec/h264_slice.c > +++ b/libavcodec/h264_slice.c > @@ -806,6 +806,12 @@ static enum AVPixelFormat > get_pixel_format(H264Context *h, int force_callback) > } else if (CHROMA422(h)) > *fmt++ = AV_PIX_FMT_YUV422P10; > else > +#if CONFIG_H264_VAAPI_HWACCEL > + // Just add as candidate. Whether VAProfileH264High10 usable or > + // not is decided by vaapi_decode_make_config() defined in FFmpeg > + // and vaQueryCodingProfile() defined in libva. > + *fmt++ = AV_PIX_FMT_VAAPI; > +#endif > *fmt++ = AV_PIX_FMT_YUV420P10; After applying this change, AV_PIX_FMT_YUV420P10 is always added as candidate for all 10bit videos when CONFIG_H264_VAAPI_HWACCEL is 1. It should be: else { #if CONFIG_H264_VAAPI_HWACCEL *fmt++ = AV_PIX_FMT_VAAPI; #endif *fmt++ = AV_PIX_FMT_YUV420P10; } > break; > case 12: > diff --git a/libavcodec/vaapi_decode.c b/libavcodec/vaapi_decode.c > index 134f10eca5..551c7593b9 100644 > --- a/libavcodec/vaapi_decode.c > +++ b/libavcodec/vaapi_decode.c > @@ -402,6 +402,9 @@ static const struct { > H264ConstrainedBaseline), > MAP(H264, H264_MAIN, H264Main ), > MAP(H264, H264_HIGH, H264High ), > +#if HAVE_VA_PROFILE_H264_HIGH10 > + MAP(H264, H264_HIGH_10, H264High10 ), > +#endif > #if VA_CHECK_VERSION(0, 37, 0) > MAP(HEVC, HEVC_MAIN, HEVCMain ), > MAP(HEVC, HEVC_MAIN_10, HEVCMain10 ), > @@ -510,6 +513,13 @@ static int vaapi_decode_make_config(AVCodecContext > *avctx, > if (exact_match) > break; > } > +#if HAVE_VA_PROFILE_H264_HIGH10 > + //incase 8bit stream being decoded under VAProfileH264High10 > + if (avctx->codec_id == AV_CODEC_ID_H264 && > + (avctx->profile == FF_PROFILE_H264_EXTENDED || > avctx->profile == FF_PROFILE_H264_BASELINE) && > + matched_va_profile == VAProfileH264High) > + break; > +#endif How about to take bit depth into account when finding out the matched va profile ? > } > av_freep(&profile_list); > > diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c > index dd17be2190..0d2b4631b8 100644 > --- a/libavcodec/vaapi_encode_h264.c > +++ b/libavcodec/vaapi_encode_h264.c > @@ -23,6 +23,7 @@ > > #include "libavutil/avassert.h" > #include "libavutil/common.h" > +#include "libavutil/pixdesc.h" > #include "libavutil/internal.h" > #include "libavutil/opt.h" > > @@ -290,10 +291,21 @@ static int > vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) > H264RawPPS *pps = &priv->raw_pps; > VAEncSequenceParameterBufferH264 *vseq = ctx->codec_sequence_params; > VAEncPictureParameterBufferH264 *vpic = ctx->codec_picture_params; > + const AVPixFmtDescriptor *desc; > + int bit_depth; > > memset(sps, 0, sizeof(*sps)); > memset(pps, 0, sizeof(*pps)); > > + desc = av_pix_fmt_desc_get(priv->common.input_frames->sw_format); > + av_assert0(desc); > + if (desc->nb_components == 1 || desc->log2_chroma_w != 1 || > desc->log2_chroma_h != 1) { > + av_log(avctx, AV_LOG_ERROR, "Chroma format of input pixel format " > + "%s is not supported.\n", desc->name); > + return AVERROR(EINVAL); > + } Is it possible a new vaapi driver would support new formats? e.g. vuyx for high profile 4:4:4 ? > + bit_depth = desc->comp[0].depth; > + > sps->nal_unit_header.nal_ref_idc = 3; > sps->nal_unit_header.nal_unit_type = H264_NAL_SPS; > > @@ -303,11 +315,11 @@ static int > vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) > avctx->profile == FF_PROFILE_H264_MAIN) > sps->constraint_set1_flag = 1; > > - if (avctx->profile == FF_PROFILE_H264_HIGH) > + if (avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == > FF_PROFILE_H264_HIGH_10) > sps->constraint_set3_flag = ctx->gop_size == 1; > > if (avctx->profile == FF_PROFILE_H264_MAIN || > - avctx->profile == FF_PROFILE_H264_HIGH) { > + avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == > FF_PROFILE_H264_HIGH_10) { > sps->constraint_set4_flag = 1; > sps->constraint_set5_flag = ctx->b_per_p == 0; > } > @@ -348,6 +360,8 @@ static int > vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) > > sps->seq_parameter_set_id = 0; > sps->chroma_format_idc = 1; > + sps->bit_depth_luma_minus8 = bit_depth - 8; > + sps->bit_depth_chroma_minus8 = bit_depth - 8; > > sps->log2_max_frame_num_minus4 = 4; > sps->pic_order_cnt_type = 0; > @@ -1111,6 +1125,9 @@ static av_cold int > vaapi_encode_h264_configure(AVCodecContext *avctx) > } > > static const VAAPIEncodeProfile vaapi_encode_h264_profiles[] = { > +#if HAVE_VA_PROFILE_H264_HIGH10 > + { FF_PROFILE_H264_HIGH_10, 10, 3, 1, 1, VAProfileH264High10 }, > +#endif > { FF_PROFILE_H264_HIGH, 8, 3, 1, 1, VAProfileH264High }, > { FF_PROFILE_H264_MAIN, 8, 3, 1, 1, VAProfileH264Main }, > { FF_PROFILE_H264_CONSTRAINED_BASELINE, > @@ -1175,11 +1192,13 @@ static av_cold int > vaapi_encode_h264_init(AVCodecContext *avctx) > av_log(avctx, AV_LOG_ERROR, "H.264 extended profile " > "is not supported.\n"); > return AVERROR_PATCHWELCOME; > +#if !HAVE_VA_PROFILE_H264_HIGH10 > case FF_PROFILE_H264_HIGH_10: > case FF_PROFILE_H264_HIGH_10_INTRA: Is FF_PROFILE_H264_HIGH_10_INTRA supported when HAVE_VA_PROFILE_H264_HIGH10 is 1 ? FF_PROFILE_H264_HIGH_10_INTRA is not added into vaapi_encode_h264_profiles[]. BTW fate server failed to apply your patch, please check your patch format. See https://patchwork.ffmpeg.org/project/ffmpeg/patch/CAFWZL8qpn_+ehMrexRg+J8TQqjKZxBES7SKMwQjfW0vS3vHWMg@mail.gmail.com/ Thanks Haihao > av_log(avctx, AV_LOG_ERROR, "H.264 10-bit profiles " > "are not supported.\n"); > return AVERROR_PATCHWELCOME; > +#endif > case FF_PROFILE_H264_HIGH_422: > case FF_PROFILE_H264_HIGH_422_INTRA: > case FF_PROFILE_H264_HIGH_444: > @@ -1267,6 +1286,7 @@ static const AVOption vaapi_encode_h264_options[] = { > { PROFILE("constrained_baseline", FF_PROFILE_H264_CONSTRAINED_BASELINE) > }, > { PROFILE("main", FF_PROFILE_H264_MAIN) }, > { PROFILE("high", FF_PROFILE_H264_HIGH) }, > + { PROFILE("high10", FF_PROFILE_H264_HIGH_10) }, > #undef PROFILE > > { "level", "Set level (level_idc)", > diff --git a/libavcodec/vaapi_h264.c b/libavcodec/vaapi_h264.c > index 9332aa6f31..3e44c8caf6 100644 > --- a/libavcodec/vaapi_h264.c > +++ b/libavcodec/vaapi_h264.c > @@ -234,6 +234,7 @@ static int vaapi_h264_start_frame(AVCodecContext > *avctx, > VAPictureParameterBufferH264 pic_param; > VAIQMatrixBufferH264 iq_matrix; > int err; > + int qp_bd_offset = 6 * (sps->bit_depth_luma - 8); > > pic->output_surface = ff_vaapi_get_surface_id(h->cur_pic_ptr->f); > > @@ -256,8 +257,8 @@ static int vaapi_h264_start_frame(AVCodecContext > *avctx, > .log2_max_pic_order_cnt_lsb_minus4 = > sps->log2_max_poc_lsb - 4, > .delta_pic_order_always_zero_flag = > sps->delta_pic_order_always_zero_flag, > }, > - .pic_init_qp_minus26 = pps->init_qp - 26, > - .pic_init_qs_minus26 = pps->init_qs - 26, > + .pic_init_qp_minus26 = pps->init_qp - > 26 - qp_bd_offset, > + .pic_init_qs_minus26 = pps->init_qs - > 26 - qp_bd_offset, > .chroma_qp_index_offset = > pps->chroma_qp_index_offset[0], > .second_chroma_qp_index_offset = > pps->chroma_qp_index_offset[1], > .pic_fields.bits = {
Hi Haihao, Xiang, Haihao <haihao.xiang-at-intel.com@ffmpeg.org> 于2023年1月5日周四 14:07写道: > > On Di, 2022-12-27 at 11:12 +0800, Jianfeng Zheng wrote: > > see https://github.com/intel/libva/pull/664 > > > > Signed-off-by: jianfeng.zheng <jianfeng.zheng@mthreads.com> > > --- > > configure | 13 +++++++++++++ > > libavcodec/h264_slice.c | 6 ++++++ > > libavcodec/vaapi_decode.c | 10 ++++++++++ > > libavcodec/vaapi_encode_h264.c | 24 ++++++++++++++++++++++-- > > libavcodec/vaapi_h264.c | 5 +++-- > > 5 files changed, 54 insertions(+), 4 deletions(-) > > > > diff --git a/configure b/configure > > index f08cdab3d1..ac199d97cb 100755 > > --- a/configure > > +++ b/configure > > @@ -2410,6 +2410,7 @@ HAVE_LIST=" > > texi2html > > xmllint > > zlib_gzip > > + va_profile_h264_high10 > > " > > > > # options emitted with CONFIG_ prefix but not available on the command line > > @@ -6958,6 +6959,18 @@ if enabled vaapi; then > > check_type "va/va.h va/va_enc_jpeg.h" "VAEncPictureParameterBufferJPEG" > > check_type "va/va.h va/va_enc_vp8.h" "VAEncPictureParameterBufferVP8" > > check_type "va/va.h va/va_enc_vp9.h" "VAEncPictureParameterBufferVP9" > > + > > + # > > + # Using 'VA_CHECK_VERSION' in source codes make things easy. But > > we have to wait > > + # until newly added VAProfile being distributed by VAAPI released > > version. > > + # > > + # Before or after that, we can use auto-detection to keep version > > compatibility. > > + # It always works. > > + # > > + disable va_profile_h264_high10 && enabled h264_vaapi_hwaccel > > + test_code cc va/va.h "VAProfile p = VAProfileH264High10" && > > + enable va_profile_h264_high10 > > + > > I think we should wait for a new VA-API version, otherwise it is meaningless to > merge this patch without vaapi support. > > > fi > > > > if enabled_all opencl libdrm ; then > > diff --git a/libavcodec/h264_slice.c b/libavcodec/h264_slice.c > > index 420758ba0a..b9236281b1 100644 > > --- a/libavcodec/h264_slice.c > > +++ b/libavcodec/h264_slice.c > > @@ -806,6 +806,12 @@ static enum AVPixelFormat > > get_pixel_format(H264Context *h, int force_callback) > > } else if (CHROMA422(h)) > > *fmt++ = AV_PIX_FMT_YUV422P10; > > else > > +#if CONFIG_H264_VAAPI_HWACCEL > > + // Just add as candidate. Whether VAProfileH264High10 usable or > > + // not is decided by vaapi_decode_make_config() defined in FFmpeg > > + // and vaQueryCodingProfile() defined in libva. > > + *fmt++ = AV_PIX_FMT_VAAPI; > > +#endif > > *fmt++ = AV_PIX_FMT_YUV420P10; > > After applying this change, AV_PIX_FMT_YUV420P10 is always added as candidate > for all 10bit videos when CONFIG_H264_VAAPI_HWACCEL is 1. > > It should be: > > else { > #if CONFIG_H264_VAAPI_HWACCEL > *fmt++ = AV_PIX_FMT_VAAPI; > #endif > *fmt++ = AV_PIX_FMT_YUV420P10; > } > Yes, braces needed. > > > break; > > case 12: > > diff --git a/libavcodec/vaapi_decode.c b/libavcodec/vaapi_decode.c > > index 134f10eca5..551c7593b9 100644 > > --- a/libavcodec/vaapi_decode.c > > +++ b/libavcodec/vaapi_decode.c > > @@ -402,6 +402,9 @@ static const struct { > > H264ConstrainedBaseline), > > MAP(H264, H264_MAIN, H264Main ), > > MAP(H264, H264_HIGH, H264High ), > > +#if HAVE_VA_PROFILE_H264_HIGH10 > > + MAP(H264, H264_HIGH_10, H264High10 ), > > +#endif > > #if VA_CHECK_VERSION(0, 37, 0) > > MAP(HEVC, HEVC_MAIN, HEVCMain ), > > MAP(HEVC, HEVC_MAIN_10, HEVCMain10 ), > > @@ -510,6 +513,13 @@ static int vaapi_decode_make_config(AVCodecContext > > *avctx, > > if (exact_match) > > break; > > } > > +#if HAVE_VA_PROFILE_H264_HIGH10 > > + //incase 8bit stream being decoded under VAProfileH264High10 > > + if (avctx->codec_id == AV_CODEC_ID_H264 && > > + (avctx->profile == FF_PROFILE_H264_EXTENDED || > > avctx->profile == FF_PROFILE_H264_BASELINE) && > > + matched_va_profile == VAProfileH264High) > > + break; > > +#endif > > How about to take bit depth into account when finding out the matched va profile > ? > This is just for deeling with bit depth issues when no va profile matched for H.264 extended or baseline profile. > > } > > av_freep(&profile_list); > > > > diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c > > index dd17be2190..0d2b4631b8 100644 > > --- a/libavcodec/vaapi_encode_h264.c > > +++ b/libavcodec/vaapi_encode_h264.c > > @@ -23,6 +23,7 @@ > > > > #include "libavutil/avassert.h" > > #include "libavutil/common.h" > > +#include "libavutil/pixdesc.h" > > #include "libavutil/internal.h" > > #include "libavutil/opt.h" > > > > @@ -290,10 +291,21 @@ static int > > vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) > > H264RawPPS *pps = &priv->raw_pps; > > VAEncSequenceParameterBufferH264 *vseq = ctx->codec_sequence_params; > > VAEncPictureParameterBufferH264 *vpic = ctx->codec_picture_params; > > + const AVPixFmtDescriptor *desc; > > + int bit_depth; > > > > memset(sps, 0, sizeof(*sps)); > > memset(pps, 0, sizeof(*pps)); > > > > + desc = av_pix_fmt_desc_get(priv->common.input_frames->sw_format); > > + av_assert0(desc); > > + if (desc->nb_components == 1 || desc->log2_chroma_w != 1 || > > desc->log2_chroma_h != 1) { > > + av_log(avctx, AV_LOG_ERROR, "Chroma format of input pixel format " > > + "%s is not supported.\n", desc->name); > > + return AVERROR(EINVAL); > > + } > > Is it possible a new vaapi driver would support new formats? e.g. vuyx for high > profile 4:4:4 ? > Maybe, but VAProfileH264High444 likes should be defined by VAAPI first. Or else seems meaningless under VAAPI hwaccels. > > + bit_depth = desc->comp[0].depth; > > + > > sps->nal_unit_header.nal_ref_idc = 3; > > sps->nal_unit_header.nal_unit_type = H264_NAL_SPS; > > > > @@ -303,11 +315,11 @@ static int > > vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) > > avctx->profile == FF_PROFILE_H264_MAIN) > > sps->constraint_set1_flag = 1; > > > > - if (avctx->profile == FF_PROFILE_H264_HIGH) > > + if (avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == > > FF_PROFILE_H264_HIGH_10) > > sps->constraint_set3_flag = ctx->gop_size == 1; > > > > if (avctx->profile == FF_PROFILE_H264_MAIN || > > - avctx->profile == FF_PROFILE_H264_HIGH) { > > + avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == > > FF_PROFILE_H264_HIGH_10) { > > sps->constraint_set4_flag = 1; > > sps->constraint_set5_flag = ctx->b_per_p == 0; > > } > > @@ -348,6 +360,8 @@ static int > > vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) > > > > sps->seq_parameter_set_id = 0; > > sps->chroma_format_idc = 1; > > + sps->bit_depth_luma_minus8 = bit_depth - 8; > > + sps->bit_depth_chroma_minus8 = bit_depth - 8; > > > > sps->log2_max_frame_num_minus4 = 4; > > sps->pic_order_cnt_type = 0; > > @@ -1111,6 +1125,9 @@ static av_cold int > > vaapi_encode_h264_configure(AVCodecContext *avctx) > > } > > > > static const VAAPIEncodeProfile vaapi_encode_h264_profiles[] = { > > +#if HAVE_VA_PROFILE_H264_HIGH10 > > + { FF_PROFILE_H264_HIGH_10, 10, 3, 1, 1, VAProfileH264High10 }, > > +#endif > > { FF_PROFILE_H264_HIGH, 8, 3, 1, 1, VAProfileH264High }, > > { FF_PROFILE_H264_MAIN, 8, 3, 1, 1, VAProfileH264Main }, > > { FF_PROFILE_H264_CONSTRAINED_BASELINE, > > @@ -1175,11 +1192,13 @@ static av_cold int > > vaapi_encode_h264_init(AVCodecContext *avctx) > > av_log(avctx, AV_LOG_ERROR, "H.264 extended profile " > > "is not supported.\n"); > > return AVERROR_PATCHWELCOME; > > +#if !HAVE_VA_PROFILE_H264_HIGH10 > > case FF_PROFILE_H264_HIGH_10: > > case FF_PROFILE_H264_HIGH_10_INTRA: > > Is FF_PROFILE_H264_HIGH_10_INTRA supported when HAVE_VA_PROFILE_H264_HIGH10 is 1 > ? FF_PROFILE_H264_HIGH_10_INTRA is not added into vaapi_encode_h264_profiles[]. > Would be fixed. > > BTW fate server failed to apply your patch, please check your patch format. See > https://patchwork.ffmpeg.org/project/ffmpeg/patch/CAFWZL8qpn_+ehMrexRg+J8TQqjKZxBES7SKMwQjfW0vS3vHWMg@mail.gmail.com/ > > Thanks > Haihao > > > > av_log(avctx, AV_LOG_ERROR, "H.264 10-bit profiles " > > "are not supported.\n"); > > return AVERROR_PATCHWELCOME; > > +#endif > > case FF_PROFILE_H264_HIGH_422: > > case FF_PROFILE_H264_HIGH_422_INTRA: > > case FF_PROFILE_H264_HIGH_444: > > @@ -1267,6 +1286,7 @@ static const AVOption vaapi_encode_h264_options[] = { > > { PROFILE("constrained_baseline", FF_PROFILE_H264_CONSTRAINED_BASELINE) > > }, > > { PROFILE("main", FF_PROFILE_H264_MAIN) }, > > { PROFILE("high", FF_PROFILE_H264_HIGH) }, > > + { PROFILE("high10", FF_PROFILE_H264_HIGH_10) }, > > #undef PROFILE > > > > { "level", "Set level (level_idc)", > > diff --git a/libavcodec/vaapi_h264.c b/libavcodec/vaapi_h264.c > > index 9332aa6f31..3e44c8caf6 100644 > > --- a/libavcodec/vaapi_h264.c > > +++ b/libavcodec/vaapi_h264.c > > @@ -234,6 +234,7 @@ static int vaapi_h264_start_frame(AVCodecContext > > *avctx, > > VAPictureParameterBufferH264 pic_param; > > VAIQMatrixBufferH264 iq_matrix; > > int err; > > + int qp_bd_offset = 6 * (sps->bit_depth_luma - 8); > > > > pic->output_surface = ff_vaapi_get_surface_id(h->cur_pic_ptr->f); > > > > @@ -256,8 +257,8 @@ static int vaapi_h264_start_frame(AVCodecContext > > *avctx, > > .log2_max_pic_order_cnt_lsb_minus4 = > > sps->log2_max_poc_lsb - 4, > > .delta_pic_order_always_zero_flag = > > sps->delta_pic_order_always_zero_flag, > > }, > > - .pic_init_qp_minus26 = pps->init_qp - 26, > > - .pic_init_qs_minus26 = pps->init_qs - 26, > > + .pic_init_qp_minus26 = pps->init_qp - > > 26 - qp_bd_offset, > > + .pic_init_qs_minus26 = pps->init_qs - > > 26 - qp_bd_offset, > > .chroma_qp_index_offset = > > pps->chroma_qp_index_offset[0], > > .second_chroma_qp_index_offset = > > pps->chroma_qp_index_offset[1], > > .pic_fields.bits = { > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". Thanks, Jianfeng
diff --git a/configure b/configure index f08cdab3d1..ac199d97cb 100755 --- a/configure +++ b/configure @@ -2410,6 +2410,7 @@ HAVE_LIST=" texi2html xmllint zlib_gzip + va_profile_h264_high10 " # options emitted with CONFIG_ prefix but not available on the command line @@ -6958,6 +6959,18 @@ if enabled vaapi; then check_type "va/va.h va/va_enc_jpeg.h" "VAEncPictureParameterBufferJPEG" check_type "va/va.h va/va_enc_vp8.h" "VAEncPictureParameterBufferVP8" check_type "va/va.h va/va_enc_vp9.h" "VAEncPictureParameterBufferVP9" + + # + # Using 'VA_CHECK_VERSION' in source codes make things easy. But we have to wait + # until newly added VAProfile being distributed by VAAPI released version. + # + # Before or after that, we can use auto-detection to keep version compatibility. + # It always works. + # + disable va_profile_h264_high10 && enabled h264_vaapi_hwaccel + test_code cc va/va.h "VAProfile p = VAProfileH264High10" && + enable va_profile_h264_high10 + fi if enabled_all opencl libdrm ; then diff --git a/libavcodec/h264_slice.c b/libavcodec/h264_slice.c index 420758ba0a..b9236281b1 100644 --- a/libavcodec/h264_slice.c +++ b/libavcodec/h264_slice.c @@ -806,6 +806,12 @@ static enum AVPixelFormat get_pixel_format(H264Context *h, int force_callback) } else if (CHROMA422(h)) *fmt++ = AV_PIX_FMT_YUV422P10; else +#if CONFIG_H264_VAAPI_HWACCEL + // Just add as candidate. Whether VAProfileH264High10 usable or + // not is decided by vaapi_decode_make_config() defined in FFmpeg + // and vaQueryCodingProfile() defined in libva. + *fmt++ = AV_PIX_FMT_VAAPI; +#endif *fmt++ = AV_PIX_FMT_YUV420P10; break; case 12: diff --git a/libavcodec/vaapi_decode.c b/libavcodec/vaapi_decode.c index 134f10eca5..551c7593b9 100644 --- a/libavcodec/vaapi_decode.c +++ b/libavcodec/vaapi_decode.c @@ -402,6 +402,9 @@ static const struct { H264ConstrainedBaseline), MAP(H264, H264_MAIN, H264Main ), MAP(H264, H264_HIGH, H264High ), +#if HAVE_VA_PROFILE_H264_HIGH10 + MAP(H264, H264_HIGH_10, H264High10 ), +#endif #if VA_CHECK_VERSION(0, 37, 0) MAP(HEVC, HEVC_MAIN, HEVCMain ), MAP(HEVC, HEVC_MAIN_10, HEVCMain10 ), @@ -510,6 +513,13 @@ static int vaapi_decode_make_config(AVCodecContext *avctx, if (exact_match) break; } +#if HAVE_VA_PROFILE_H264_HIGH10 + //incase 8bit stream being decoded under VAProfileH264High10 + if (avctx->codec_id == AV_CODEC_ID_H264 && + (avctx->profile == FF_PROFILE_H264_EXTENDED || avctx->profile == FF_PROFILE_H264_BASELINE) && + matched_va_profile == VAProfileH264High) + break; +#endif } av_freep(&profile_list); diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c index dd17be2190..0d2b4631b8 100644 --- a/libavcodec/vaapi_encode_h264.c +++ b/libavcodec/vaapi_encode_h264.c @@ -23,6 +23,7 @@ #include "libavutil/avassert.h" #include "libavutil/common.h" +#include "libavutil/pixdesc.h" #include "libavutil/internal.h" #include "libavutil/opt.h" @@ -290,10 +291,21 @@ static int vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) H264RawPPS *pps = &priv->raw_pps; VAEncSequenceParameterBufferH264 *vseq = ctx->codec_sequence_params; VAEncPictureParameterBufferH264 *vpic = ctx->codec_picture_params; + const AVPixFmtDescriptor *desc; + int bit_depth; memset(sps, 0, sizeof(*sps)); memset(pps, 0, sizeof(*pps)); + desc = av_pix_fmt_desc_get(priv->common.input_frames->sw_format); + av_assert0(desc); + if (desc->nb_components == 1 || desc->log2_chroma_w != 1 || desc->log2_chroma_h != 1) { + av_log(avctx, AV_LOG_ERROR, "Chroma format of input pixel format " + "%s is not supported.\n", desc->name); + return AVERROR(EINVAL); + } + bit_depth = desc->comp[0].depth; + sps->nal_unit_header.nal_ref_idc = 3; sps->nal_unit_header.nal_unit_type = H264_NAL_SPS; @@ -303,11 +315,11 @@ static int vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) avctx->profile == FF_PROFILE_H264_MAIN) sps->constraint_set1_flag = 1; - if (avctx->profile == FF_PROFILE_H264_HIGH) + if (avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == FF_PROFILE_H264_HIGH_10) sps->constraint_set3_flag = ctx->gop_size == 1; if (avctx->profile == FF_PROFILE_H264_MAIN || - avctx->profile == FF_PROFILE_H264_HIGH) { + avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == FF_PROFILE_H264_HIGH_10) { sps->constraint_set4_flag = 1; sps->constraint_set5_flag = ctx->b_per_p == 0; } @@ -348,6 +360,8 @@ static int vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) sps->seq_parameter_set_id = 0; sps->chroma_format_idc = 1; + sps->bit_depth_luma_minus8 = bit_depth - 8; + sps->bit_depth_chroma_minus8 = bit_depth - 8; sps->log2_max_frame_num_minus4 = 4; sps->pic_order_cnt_type = 0; @@ -1111,6 +1125,9 @@ static av_cold int vaapi_encode_h264_configure(AVCodecContext *avctx) } static const VAAPIEncodeProfile vaapi_encode_h264_profiles[] = { +#if HAVE_VA_PROFILE_H264_HIGH10 + { FF_PROFILE_H264_HIGH_10, 10, 3, 1, 1, VAProfileH264High10 }, +#endif { FF_PROFILE_H264_HIGH, 8, 3, 1, 1, VAProfileH264High }, { FF_PROFILE_H264_MAIN, 8, 3, 1, 1, VAProfileH264Main }, { FF_PROFILE_H264_CONSTRAINED_BASELINE, @@ -1175,11 +1192,13 @@ static av_cold int vaapi_encode_h264_init(AVCodecContext *avctx) av_log(avctx, AV_LOG_ERROR, "H.264 extended profile " "is not supported.\n"); return AVERROR_PATCHWELCOME; +#if !HAVE_VA_PROFILE_H264_HIGH10 case FF_PROFILE_H264_HIGH_10: case FF_PROFILE_H264_HIGH_10_INTRA: av_log(avctx, AV_LOG_ERROR, "H.264 10-bit profiles " "are not supported.\n"); return AVERROR_PATCHWELCOME; +#endif case FF_PROFILE_H264_HIGH_422: case FF_PROFILE_H264_HIGH_422_INTRA: case FF_PROFILE_H264_HIGH_444: @@ -1267,6 +1286,7 @@ static const AVOption vaapi_encode_h264_options[] = { { PROFILE("constrained_baseline", FF_PROFILE_H264_CONSTRAINED_BASELINE) }, { PROFILE("main", FF_PROFILE_H264_MAIN) }, { PROFILE("high", FF_PROFILE_H264_HIGH) }, + { PROFILE("high10", FF_PROFILE_H264_HIGH_10) }, #undef PROFILE { "level", "Set level (level_idc)", diff --git a/libavcodec/vaapi_h264.c b/libavcodec/vaapi_h264.c index 9332aa6f31..3e44c8caf6 100644 --- a/libavcodec/vaapi_h264.c +++ b/libavcodec/vaapi_h264.c @@ -234,6 +234,7 @@ static int vaapi_h264_start_frame(AVCodecContext *avctx, VAPictureParameterBufferH264 pic_param; VAIQMatrixBufferH264 iq_matrix; int err; + int qp_bd_offset = 6 * (sps->bit_depth_luma - 8); pic->output_surface = ff_vaapi_get_surface_id(h->cur_pic_ptr->f);
see https://github.com/intel/libva/pull/664 Signed-off-by: jianfeng.zheng <jianfeng.zheng@mthreads.com> --- configure | 13 +++++++++++++ libavcodec/h264_slice.c | 6 ++++++ libavcodec/vaapi_decode.c | 10 ++++++++++ libavcodec/vaapi_encode_h264.c | 24 ++++++++++++++++++++++-- libavcodec/vaapi_h264.c | 5 +++-- 5 files changed, 54 insertions(+), 4 deletions(-) @@ -256,8 +257,8 @@ static int vaapi_h264_start_frame(AVCodecContext *avctx, .log2_max_pic_order_cnt_lsb_minus4 = sps->log2_max_poc_lsb - 4, .delta_pic_order_always_zero_flag = sps->delta_pic_order_always_zero_flag, }, - .pic_init_qp_minus26 = pps->init_qp - 26, - .pic_init_qs_minus26 = pps->init_qs - 26, + .pic_init_qp_minus26 = pps->init_qp - 26 - qp_bd_offset, + .pic_init_qs_minus26 = pps->init_qs - 26 - qp_bd_offset, .chroma_qp_index_offset = pps->chroma_qp_index_offset[0], .second_chroma_qp_index_offset = pps->chroma_qp_index_offset[1], .pic_fields.bits = {