@@ -1566,6 +1566,163 @@ Set maximum NAL size in bytes.
Allow skipping frames to hit the target bitrate if set to 1.
@end table
+@section libsvt_hevc
+
+Intel Scalable Video Technology HEVC encoder wrapper.
+
+This encoder requires the presence of the headers and
+library during configuration. You need to explicitly configure the
+build with @code{--enable-libsvt}. The library is detected using
+@command{pkg-config}.
+
+For more information about the library see
+@url{https://github.com/intel/SVT-HEVC.git}.
+
+@subsection Options
+
+The following FFmpeg global options affect the configurations of the
+libsvt_hevc encoder.
+
+@table @option
+@item b (@emph{bitrate})
+Set the bitrate (as a number of bits per second). Default is 7M.
+
+@item refs (@emph{ref})
+Number of reference frames each P-frame can use. The range is from @var{0-16}.
+Default is 0(disabled).
+
+@item g / @option{gop_size}
+Set the GOP size. Default is 64.
+
+@item flags +cgop
+Enable closed GOP.
+
+@item qmin (@emph{min-q})
+Defaults 10
+
+@item qmax (@emph{max-q})
+Defaults 48
+
+Set minimum/maximum quantisation values. Valid range is from 0 to 51
+(Only used when bit rate control mode @option{rc} is set to 0(cqp) mode.
+Has to be qmax > = qmin).
+
+@item profile (@emph{profile})
+Set profile restrictions. Can assume one of the following possible values:
+
+Default is 2 (main10).
+
+@table @samp
+@item main
+main profile
+@item main10
+main10 profile
+@end table
+
+@item level
+
+@option{profile} sets the value of @emph{profile_idc} and the @emph{constraint_set*_flag}s.
+@option{level} sets the value of @emph{level_idc}.
+
+@end table
+
+The encoder also has its own specific options:
+
+@table @option
+@item vui
+Enables or disables the vui structure in the HEVC elementary
+bitstream. 0 = Off, 1 = On. Default is 0 (Off).
+
+@item aud (@emph{aud})
+Enable use of access unit delimiters when set to 1. Default is 0 (Off).
+
+@item hielevel
+Set hierarchical levels. Can assume one of the following possible values:
+
+Default is 3 (4level).
+
+@table @samp
+@item flat
+none hierarchy level
+@item 2level
+2-level hierarchy
+@item 3level
+3-level hierarchy
+@item 4level
+4-level hierarchy
+@end table
+
+@item la_depth
+Set look-ahead depth, depending on bit rate control mode @option{rc}, when
+bit rate control mode is set to vbr it's best to set this parameter to be
+equal to the intra period value (such is the default set by the encoder),
+when cqp is chosen, then a look ahead is recommended. The range is from @var{0-256}.
+
+@item intra_ref_type
+Set intra refesh type. Can assume one of the following possible values:
+
+Default is 2 (idr).
+
+@table @samp
+@item cra
+open group of pictures
+@item idr
+closed group of pictures
+@end table
+
+@item preset
+A preset defining the quality vs density tradeoff point that the
+encoding is to be performed at.(e.g. 0 is the highest quality mode,
+12 is the highest density mode). The range is from @var{0-12}. Default is 9.
+
+@item tier
+Set @emph{general_tier_flag}. This may affect the level chosen for the stream
+if it is not explicitly specified. Can assume one of the following possible values:
+
+Default is 1 (main).
+
+@table @samp
+@item main
+main tier
+@item high
+high tier
+@end table
+
+@item rc
+Set bit rate control mode. Can assume one of the following possible values:
+
+Default is 0 (cqp).
+
+@table @samp
+@item cqp
+Constant QP (CQP) mode
+@item vbr
+Variable Bit Rate (VBR) mode
+@end table
+
+@item qp
+Initial quantization parameter for the intra pictures used when
+@option{rc} is cqp mode. The range is from @var{0-51}. Default is 32.
+
+@item sc_detection
+Enables or disables the scene change detection algorithm. Default is 0 (disable).
+
+@item tune
+Set quality tuning mode. Can assume one of the following possible values:
+
+Default is 1 (objective).
+
+@table @samp
+@item subjective
+Subjective quality mode
+@item objective
+Objective quality mode for PSNR / SSIM / VMAF benchmarking
+@end table
+
+@item bl_mode
+Enables or disables Random Access Prediction. Default is 0 (disable).
+@end table
+
@section libtheora
libtheora Theora encoder wrapper.
@@ -126,6 +126,20 @@ The dispatcher is open source and can be downloaded from
with the @code{--enable-libmfx} option and @code{pkg-config} needs to be able to
locate the dispatcher's @code{.pc} files.
+@section Intel SVT-HEVC
+
+FFmpeg can make use of the SVT-HEVC library for HEVC encoding.
+
+Go to @url{https://github.com/intel/SVT-HEVC.git} and follow the instructions
+for installing the library. Then pass @code{--enable-libsvt} to configure to
+enable it.
+
+@float NOTE
+Intel SVT_HEVC encoder is under the BSD-2-Clause Plus Patent License
+(see @url{https://spdx.org/licenses/BSD-2-Clause-Patent.html} for
+details), you must upgrade FFmpeg's license to GPL in order to use it.
+@end float
+
@section Kvazaar
FFmpeg can make use of the Kvazaar library for HEVC encoding.