@@ -1569,6 +1569,151 @@ Set maximum NAL size in bytes.
Allow skipping frames to hit the target bitrate if set to 1.
@end table
+@section libsvt_hevc
+
+Scalable Video Technology for HEVC encoder (SVT-HEVC encoder) wrapper.
+
+This encoder requires the presence of the headers and library during
+configuration. You need to explicitly configure the build with
+@code{--enable-libsvthevc}. The library is detected using
+@command{pkg-config}.
+
+For more information about the library see
+@url{https://github.com/intel/SVT-HEVC.git}.
+
+@subsection Options
+
+The following FFmpeg global options affect the configurations of the
+libsvt_hevc encoder.
+
+@table @option
+@item b (@emph{bitrate})
+Set the bitrate (as a number of bits per second). Default is 7M.
+
+@item g / @option{gop_size}
+Set the GOP size. Default is -2 (unspecified).
+
+@item flags +cgop
+Enable closed GOP.
+
+@item qmin (@emph{min-q})
+Defaults 10
+
+@item qmax (@emph{max-q})
+Defaults 48
+
+Set minimum/maximum quantisation values. Valid range is from 0 to 51
+(Only used when bit rate control mode @option{rc} is set to 1(vbr) mode.
+Has to be qmax > = qmin).
+
+@item profile (@emph{profile})
+Set profile restrictions. Can assume one of the following possible values:
+
+Default is 2 (main10).
+
+@table @samp
+@item main
+main profile
+@item main10
+main10 profile
+@end table
+
+@item level
+
+@option{profile} sets the value of @emph{profile}.
+@option{level} sets the value of @emph{level}.
+
+The encoder also has its own specific options:
+
+@table @option
+@item vui
+Enables or disables the vui structure in the HEVC elementary bitstream.
+0 = Off, 1 = On. Default is 0 (Off).
+
+@item aud (@emph{aud})
+Enable use of access unit delimiters when set to 1. Default is 0 (Off).
+
+@item hielevel
+Set hierarchical levels. Can assume one of the following possible values:
+
+Default is 3 (4level).
+
+@table @samp
+@item flat
+none hierarchy level
+@item 2level
+2-level hierarchy
+@item 3level
+3-level hierarchy
+@item 4level
+4-level hierarchy
+@end table
+
+@item la_depth
+Set look-ahead depth, depending on bit rate control mode @option{rc},
+when bit rate control mode is set to vbr it's best to set this
+parameter to be equal to the intra period value (such is the default
+set by the encoder), when cqp is chosen, then a look ahead is recommended. The range is from @var{0-256}.
+
+@item preset
+A preset defining the quality vs density tradeoff point that the
+encoding is to be performed at.(e.g. 0 is the highest quality mode,
+12 is the highest density mode). The range is from @var{0-12}. Default is 9.
+
+@item tier
+Set @emph{general_tier_flag}. This may affect the level chosen for the
+stream if it is not explicitly specified. Can assume one of the following possible values:
+
+Default is 1 (main).
+
+@table @samp
+@item main
+main tier
+@item high
+high tier
+@end table
+
+@item rc
+Set bit rate control mode. Can assume one of the following possible values:
+
+Default is 0 (cqp).
+
+@table @samp
+@item cqp
+Constant QP (CQP) mode
+@item vbr
+Variable Bit Rate (VBR) mode
+@end table
+
+@item qp
+Initial quantization parameter for the intra pictures used when
+@option{rc} is cqp mode. The range is from @var{0-51}. Default is 32.
+
+@item sc_detection
+Enables or disables the scene change detection algorithm. Default is 0 (disable).
+
+@item tune
+Set quality tuning mode. Can assume one of the following possible values:
+
+Default is 1 (oq).
+
+@table @samp
+@item sq
+Visually optimized mode
+@item oq
+PSNR / SSIM optimized mode
+@item vmaf
+VMAF optimized mode
+@end table
+
+@item bl_mode
+Enables or disables Random Access Prediction. Default is 0 (disable).
+@end table
+
+@item hdr
+High dynamic range input. Default is 0 (disable).
+@end table
+
@section libtheora
libtheora Theora encoder wrapper.
@@ -234,6 +234,14 @@ FFmpeg can use the OpenJPEG libraries for decoding/encoding J2K videos. Go to instructions. To enable using OpenJPEG in FFmpeg, pass @code{--enable-libopenjpeg} to @file{./configure}.
+@section Scalable Video Technology for HEVC
+
+FFmpeg can make use of the SVT-HEVC library for HEVC encoding.
+
+Go to @url{https://github.com/intel/SVT-HEVC.git} and follow the
+instructions for installing the library. Pass
+@code{--enable-libsvthevc} to configure to enable it.
+
@section TwoLAME
FFmpeg can make use of the TwoLAME library for MP2 encoding.
--
1.8.3.1