[FFmpeg-devel,v1] avcodec/h264_parse: retry decoding SPS with complete NAL

Submitted by Jun Li on Aug. 19, 2019, 1:41 a.m.

Details

Message ID 20190819014114.4336-1-junli1026@gmail.com
State New
Headers show

Commit Message

Jun Li Aug. 19, 2019, 1:41 a.m.
Fix #6591
The content has no rbsp_stop_one_bit for ending the SPS, that
causes the decoding SPS failure, results decoding frame failure as well.
The patch is just adding a retry with complete NALU.
---
 libavcodec/h264_parse.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

Comments

James Almer Aug. 19, 2019, 10:37 p.m.
On 8/18/2019 10:41 PM, Jun Li wrote:
> Fix #6591
> The content has no rbsp_stop_one_bit for ending the SPS, that
> causes the decoding SPS failure, results decoding frame failure as well.
> The patch is just adding a retry with complete NALU.
> ---
>  libavcodec/h264_parse.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/libavcodec/h264_parse.c b/libavcodec/h264_parse.c
> index ac31f54e07..a2267a0610 100644
> --- a/libavcodec/h264_parse.c
> +++ b/libavcodec/h264_parse.c
> @@ -376,8 +376,14 @@ static int decode_extradata_ps(const uint8_t *data, int size, H264ParamSets *ps,
>          switch (nal->type) {
>          case H264_NAL_SPS:
>              ret = ff_h264_decode_seq_parameter_set(&nal->gb, logctx, ps, 0);
> -            if (ret < 0)
> -                goto fail;
> +            if (ret < 0) {
> +                GetBitContext tmp_gb = nal->gb;
> +                av_log(logctx, AV_LOG_DEBUG,
> +                   "SPS decoding failure (maybe missing rbsp_stop_one_bit), trying again with the complete NAL\n");
> +                init_get_bits8(&tmp_gb, nal->raw_data + 1, nal->raw_size - 1);
> +                if ((ret = ff_h264_decode_seq_parameter_set(&tmp_gb, logctx, ps, 0)) < 0)
> +                    goto fail;
> +            }
>              break;
>          case H264_NAL_PPS:
>              ret = ff_h264_decode_picture_parameter_set(&nal->gb, logctx, ps,

Copy instead the code from decode_nal_units() in h264dec.c, which checks
first with the complete NAL, and then calls
ff_h264_decode_seq_parameter_set() with the ignore_truncation parameter
set to 1 as a last resort.
Jun Li Aug. 20, 2019, 1:39 a.m.
On Mon, Aug 19, 2019 at 3:45 PM James Almer <jamrial@gmail.com> wrote:

> On 8/18/2019 10:41 PM, Jun Li wrote:
> > Fix #6591
> > The content has no rbsp_stop_one_bit for ending the SPS, that
> > causes the decoding SPS failure, results decoding frame failure as well.
> > The patch is just adding a retry with complete NALU.
> > ---
> >  libavcodec/h264_parse.c | 10 ++++++++--
> >  1 file changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/libavcodec/h264_parse.c b/libavcodec/h264_parse.c
> > index ac31f54e07..a2267a0610 100644
> > --- a/libavcodec/h264_parse.c
> > +++ b/libavcodec/h264_parse.c
> > @@ -376,8 +376,14 @@ static int decode_extradata_ps(const uint8_t *data,
> int size, H264ParamSets *ps,
> >          switch (nal->type) {
> >          case H264_NAL_SPS:
> >              ret = ff_h264_decode_seq_parameter_set(&nal->gb, logctx,
> ps, 0);
> > -            if (ret < 0)
> > -                goto fail;
> > +            if (ret < 0) {
> > +                GetBitContext tmp_gb = nal->gb;
> > +                av_log(logctx, AV_LOG_DEBUG,
> > +                   "SPS decoding failure (maybe missing
> rbsp_stop_one_bit), trying again with the complete NAL\n");
> > +                init_get_bits8(&tmp_gb, nal->raw_data + 1,
> nal->raw_size - 1);
> > +                if ((ret = ff_h264_decode_seq_parameter_set(&tmp_gb,
> logctx, ps, 0)) < 0)
> > +                    goto fail;
> > +            }
> >              break;
> >          case H264_NAL_PPS:
> >              ret = ff_h264_decode_picture_parameter_set(&nal->gb,
> logctx, ps,
>
> Copy instead the code from decode_nal_units() in h264dec.c, which checks
> first with the complete NAL, and then calls
> ff_h264_decode_seq_parameter_set() with the ignore_truncation parameter
> set to 1 as a last resort.
>

Hi James,
My first try was set the ignore_truncation to 1 but then found that
decode_nal_units is already handling this using a different approach.
So I just copied the code here, but without last try ignore_truncation=1.

Are you suggesting modifying the commit message or comment identifying the
code is copied from decide_nal_units, or extract them to one function and
reuse two places ?

-Jun


> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
James Almer Aug. 20, 2019, 1:55 a.m.
On 8/19/2019 10:39 PM, Jun Li wrote:
> On Mon, Aug 19, 2019 at 3:45 PM James Almer <jamrial@gmail.com> wrote:
> 
>> On 8/18/2019 10:41 PM, Jun Li wrote:
>>> Fix #6591
>>> The content has no rbsp_stop_one_bit for ending the SPS, that
>>> causes the decoding SPS failure, results decoding frame failure as well.
>>> The patch is just adding a retry with complete NALU.
>>> ---
>>>  libavcodec/h264_parse.c | 10 ++++++++--
>>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/libavcodec/h264_parse.c b/libavcodec/h264_parse.c
>>> index ac31f54e07..a2267a0610 100644
>>> --- a/libavcodec/h264_parse.c
>>> +++ b/libavcodec/h264_parse.c
>>> @@ -376,8 +376,14 @@ static int decode_extradata_ps(const uint8_t *data,
>> int size, H264ParamSets *ps,
>>>          switch (nal->type) {
>>>          case H264_NAL_SPS:
>>>              ret = ff_h264_decode_seq_parameter_set(&nal->gb, logctx,
>> ps, 0);
>>> -            if (ret < 0)
>>> -                goto fail;
>>> +            if (ret < 0) {
>>> +                GetBitContext tmp_gb = nal->gb;
>>> +                av_log(logctx, AV_LOG_DEBUG,
>>> +                   "SPS decoding failure (maybe missing
>> rbsp_stop_one_bit), trying again with the complete NAL\n");
>>> +                init_get_bits8(&tmp_gb, nal->raw_data + 1,
>> nal->raw_size - 1);
>>> +                if ((ret = ff_h264_decode_seq_parameter_set(&tmp_gb,
>> logctx, ps, 0)) < 0)
>>> +                    goto fail;
>>> +            }
>>>              break;
>>>          case H264_NAL_PPS:
>>>              ret = ff_h264_decode_picture_parameter_set(&nal->gb,
>> logctx, ps,
>>
>> Copy instead the code from decode_nal_units() in h264dec.c, which checks
>> first with the complete NAL, and then calls
>> ff_h264_decode_seq_parameter_set() with the ignore_truncation parameter
>> set to 1 as a last resort.
>>
> 
> Hi James,
> My first try was set the ignore_truncation to 1 but then found that
> decode_nal_units is already handling this using a different approach.
> So I just copied the code here, but without last try ignore_truncation=1.
> 
> Are you suggesting modifying the commit message or comment identifying the
> code is copied from decide_nal_units, or extract them to one function and
> reuse two places ?

My suggestion was to copy the decode_nal_units approach here including
the last try ignore_truncation=1 call.

> 
> -Jun
> 
> 
>> _______________________________________________
>> ffmpeg-devel mailing list
>> ffmpeg-devel@ffmpeg.org
>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>>
>> To unsubscribe, visit link above, or email
>> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> 
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
>
Jun Li Aug. 20, 2019, 2:28 a.m.
On Mon, Aug 19, 2019 at 6:55 PM James Almer <jamrial@gmail.com> wrote:

> On 8/19/2019 10:39 PM, Jun Li wrote:
> > On Mon, Aug 19, 2019 at 3:45 PM James Almer <jamrial@gmail.com> wrote:
> >
> >> On 8/18/2019 10:41 PM, Jun Li wrote:
> >>> Fix #6591
> >>> The content has no rbsp_stop_one_bit for ending the SPS, that
> >>> causes the decoding SPS failure, results decoding frame failure as
> well.
> >>> The patch is just adding a retry with complete NALU.
> >>> ---
> >>>  libavcodec/h264_parse.c | 10 ++++++++--
> >>>  1 file changed, 8 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/libavcodec/h264_parse.c b/libavcodec/h264_parse.c
> >>> index ac31f54e07..a2267a0610 100644
> >>> --- a/libavcodec/h264_parse.c
> >>> +++ b/libavcodec/h264_parse.c
> >>> @@ -376,8 +376,14 @@ static int decode_extradata_ps(const uint8_t
> *data,
> >> int size, H264ParamSets *ps,
> >>>          switch (nal->type) {
> >>>          case H264_NAL_SPS:
> >>>              ret = ff_h264_decode_seq_parameter_set(&nal->gb, logctx,
> >> ps, 0);
> >>> -            if (ret < 0)
> >>> -                goto fail;
> >>> +            if (ret < 0) {
> >>> +                GetBitContext tmp_gb = nal->gb;
> >>> +                av_log(logctx, AV_LOG_DEBUG,
> >>> +                   "SPS decoding failure (maybe missing
> >> rbsp_stop_one_bit), trying again with the complete NAL\n");
> >>> +                init_get_bits8(&tmp_gb, nal->raw_data + 1,
> >> nal->raw_size - 1);
> >>> +                if ((ret = ff_h264_decode_seq_parameter_set(&tmp_gb,
> >> logctx, ps, 0)) < 0)
> >>> +                    goto fail;
> >>> +            }
> >>>              break;
> >>>          case H264_NAL_PPS:
> >>>              ret = ff_h264_decode_picture_parameter_set(&nal->gb,
> >> logctx, ps,
> >>
> >> Copy instead the code from decode_nal_units() in h264dec.c, which checks
> >> first with the complete NAL, and then calls
> >> ff_h264_decode_seq_parameter_set() with the ignore_truncation parameter
> >> set to 1 as a last resort.
> >>
> >
> > Hi James,
> > My first try was set the ignore_truncation to 1 but then found that
> > decode_nal_units is already handling this using a different approach.
> > So I just copied the code here, but without last try ignore_truncation=1.
> >
> > Are you suggesting modifying the commit message or comment identifying
> the
> > code is copied from decide_nal_units, or extract them to one function and
> > reuse two places ?
>
> My suggestion was to copy the decode_nal_units approach here including
> the last try ignore_truncation=1 call.


Thanks for the input, I updated version 2 accordingly.
https://patchwork.ffmpeg.org/patch/14604/


>
>
> > -Jun
> >
> >
> >> _______________________________________________
> >> ffmpeg-devel mailing list
> >> ffmpeg-devel@ffmpeg.org
> >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> >>
> >> To unsubscribe, visit link above, or email
> >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> > _______________________________________________
> > ffmpeg-devel mailing list
> > ffmpeg-devel@ffmpeg.org
> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> >
> > To unsubscribe, visit link above, or email
> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> >
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

Patch hide | download patch | download mbox

diff --git a/libavcodec/h264_parse.c b/libavcodec/h264_parse.c
index ac31f54e07..a2267a0610 100644
--- a/libavcodec/h264_parse.c
+++ b/libavcodec/h264_parse.c
@@ -376,8 +376,14 @@  static int decode_extradata_ps(const uint8_t *data, int size, H264ParamSets *ps,
         switch (nal->type) {
         case H264_NAL_SPS:
             ret = ff_h264_decode_seq_parameter_set(&nal->gb, logctx, ps, 0);
-            if (ret < 0)
-                goto fail;
+            if (ret < 0) {
+                GetBitContext tmp_gb = nal->gb;
+                av_log(logctx, AV_LOG_DEBUG,
+                   "SPS decoding failure (maybe missing rbsp_stop_one_bit), trying again with the complete NAL\n");
+                init_get_bits8(&tmp_gb, nal->raw_data + 1, nal->raw_size - 1);
+                if ((ret = ff_h264_decode_seq_parameter_set(&tmp_gb, logctx, ps, 0)) < 0)
+                    goto fail;
+            }
             break;
         case H264_NAL_PPS:
             ret = ff_h264_decode_picture_parameter_set(&nal->gb, logctx, ps,