Message ID | 20230620233601.1876939-1-airlied@gmail.com |
---|---|
State | New |
Headers | show |
Series | [FFmpeg-devel] av1dec: handle dimension changes via get_format | expand |
Context | Check | Description |
---|---|---|
yinshiyou/make_loongarch64 | success | Make finished |
yinshiyou/make_fate_loongarch64 | fail | Make fate failed |
andriy/make_x86 | success | Make finished |
andriy/make_fate_x86 | fail | Make fate failed |
On 6/20/23 19:36, airlied@gmail.com wrote: > From: Dave Airlie <airlied@redhat.com> > > av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the > images get resized when dimensions change, this detects the dim > change and calls the get_format to reinit the context. > --- > libavcodec/av1dec.c | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c > index e7f98a6c81..1cec328563 100644 > --- a/libavcodec/av1dec.c > +++ b/libavcodec/av1dec.c > @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) > } > > static int set_context_with_sequence(AVCodecContext *avctx, > + int *dim_change, I would add a comment above this function documenting that dim_change may be NULL, in which case it will be ignored. This is not a functional issue, it's just comments = readable = good. Also, nitpick, but this fits on the previous line (77 wide, less than 80). Ignore this if you think a new line is more readable, just keep in mind. > const AV1RawSequenceHeader *seq) > { > int width = seq->max_frame_width_minus_1 + 1; > @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, > int ret = ff_set_dimensions(avctx, width, height); > if (ret < 0) > return ret; > + if (dim_change) > + *dim_change = 1; > } > avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; > > @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) > goto end; > } > > - ret = set_context_with_sequence(avctx, seq); > + ret = set_context_with_sequence(avctx, NULL, seq); > if (ret < 0) { > av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); > goto end; > @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > CodedBitstreamUnit *unit = &s->current_obu.units[i]; > AV1RawOBU *obu = unit->content; > const AV1RawOBUHeader *header; > - > + int dim_change = 0; > if (!obu) > continue; > > @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > s->raw_seq = &obu->obu.sequence_header; > > - ret = set_context_with_sequence(avctx, s->raw_seq); > + dim_change = 0; You don't need to initialize this variable to zero here, because you initialized it to zero when you declared it. If you prefer to leave this here, then remove the `= 0;` upon declaration. > + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); > if (ret < 0) { > av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); > s->raw_seq = NULL; > @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; > > - if (s->pix_fmt == AV_PIX_FMT_NONE) { > + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { > ret = get_pixel_format(avctx); > if (ret < 0) { > av_log(avctx, AV_LOG_ERROR, - Leo Izen (Traneptora)
On 6/20/2023 8:36 PM, airlied@gmail.com wrote: > From: Dave Airlie <airlied@redhat.com> > > av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the > images get resized when dimensions change, this detects the dim > change and calls the get_format to reinit the context. > --- > libavcodec/av1dec.c | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c > index e7f98a6c81..1cec328563 100644 > --- a/libavcodec/av1dec.c > +++ b/libavcodec/av1dec.c > @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) > } > > static int set_context_with_sequence(AVCodecContext *avctx, > + int *dim_change, > const AV1RawSequenceHeader *seq) > { > int width = seq->max_frame_width_minus_1 + 1; > @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, > int ret = ff_set_dimensions(avctx, width, height); > if (ret < 0) > return ret; > + if (dim_change) > + *dim_change = 1; > } > avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; > > @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) > goto end; > } > > - ret = set_context_with_sequence(avctx, seq); > + ret = set_context_with_sequence(avctx, NULL, seq); > if (ret < 0) { > av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); > goto end; > @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > CodedBitstreamUnit *unit = &s->current_obu.units[i]; > AV1RawOBU *obu = unit->content; > const AV1RawOBUHeader *header; > - > + int dim_change = 0; > if (!obu) > continue; > > @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > s->raw_seq = &obu->obu.sequence_header; > > - ret = set_context_with_sequence(avctx, s->raw_seq); > + dim_change = 0; > + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); > if (ret < 0) { > av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); > s->raw_seq = NULL; > @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; > > - if (s->pix_fmt == AV_PIX_FMT_NONE) { > + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { > ret = get_pixel_format(avctx); Dimensions can change between frames without a seq header showing up to change the max_width/height values. get_pixel_format() would need to be called on frame headers instead. > if (ret < 0) { > av_log(avctx, AV_LOG_ERROR,
On Thu, 22 Jun 2023 at 02:36, James Almer <jamrial@gmail.com> wrote: > > On 6/20/2023 8:36 PM, airlied@gmail.com wrote: > > From: Dave Airlie <airlied@redhat.com> > > > > av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the > > images get resized when dimensions change, this detects the dim > > change and calls the get_format to reinit the context. > > --- > > libavcodec/av1dec.c | 12 ++++++++---- > > 1 file changed, 8 insertions(+), 4 deletions(-) > > > > diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c > > index e7f98a6c81..1cec328563 100644 > > --- a/libavcodec/av1dec.c > > +++ b/libavcodec/av1dec.c > > @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) > > } > > > > static int set_context_with_sequence(AVCodecContext *avctx, > > + int *dim_change, > > const AV1RawSequenceHeader *seq) > > { > > int width = seq->max_frame_width_minus_1 + 1; > > @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, > > int ret = ff_set_dimensions(avctx, width, height); > > if (ret < 0) > > return ret; > > + if (dim_change) > > + *dim_change = 1; > > } > > avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; > > > > @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) > > goto end; > > } > > > > - ret = set_context_with_sequence(avctx, seq); > > + ret = set_context_with_sequence(avctx, NULL, seq); > > if (ret < 0) { > > av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); > > goto end; > > @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > CodedBitstreamUnit *unit = &s->current_obu.units[i]; > > AV1RawOBU *obu = unit->content; > > const AV1RawOBUHeader *header; > > - > > + int dim_change = 0; > > if (!obu) > > continue; > > > > @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > > > s->raw_seq = &obu->obu.sequence_header; > > > > - ret = set_context_with_sequence(avctx, s->raw_seq); > > + dim_change = 0; > > + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); > > if (ret < 0) { > > av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); > > s->raw_seq = NULL; > > @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > > > > s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; > > > > - if (s->pix_fmt == AV_PIX_FMT_NONE) { > > + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { > > ret = get_pixel_format(avctx); > > Dimensions can change between frames without a seq header showing up to > change the max_width/height values. get_pixel_format() would need to be > called on frame headers instead. It can but my reading of the spec is that it is illegal to go beyond the max in sequence header. 6.8 Frame header OBU semantics 6.8.4 Frame size semantics " It is a requirement of bitstream conformance that frame_width_minus_1 is less than or equal to max_frame_width_minus_1. It is a requirement of bitstream conformance that frame_height_minus_1 is less than or equal to max_frame_height_minus_1. " Dave.
On 6/21/2023 6:15 PM, Dave Airlie wrote: > On Thu, 22 Jun 2023 at 02:36, James Almer <jamrial@gmail.com> wrote: >> >> On 6/20/2023 8:36 PM, airlied@gmail.com wrote: >>> From: Dave Airlie <airlied@redhat.com> >>> >>> av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the >>> images get resized when dimensions change, this detects the dim >>> change and calls the get_format to reinit the context. >>> --- >>> libavcodec/av1dec.c | 12 ++++++++---- >>> 1 file changed, 8 insertions(+), 4 deletions(-) >>> >>> diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c >>> index e7f98a6c81..1cec328563 100644 >>> --- a/libavcodec/av1dec.c >>> +++ b/libavcodec/av1dec.c >>> @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) >>> } >>> >>> static int set_context_with_sequence(AVCodecContext *avctx, >>> + int *dim_change, >>> const AV1RawSequenceHeader *seq) >>> { >>> int width = seq->max_frame_width_minus_1 + 1; >>> @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, >>> int ret = ff_set_dimensions(avctx, width, height); >>> if (ret < 0) >>> return ret; >>> + if (dim_change) >>> + *dim_change = 1; >>> } >>> avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; >>> >>> @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) >>> goto end; >>> } >>> >>> - ret = set_context_with_sequence(avctx, seq); >>> + ret = set_context_with_sequence(avctx, NULL, seq); >>> if (ret < 0) { >>> av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); >>> goto end; >>> @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) >>> CodedBitstreamUnit *unit = &s->current_obu.units[i]; >>> AV1RawOBU *obu = unit->content; >>> const AV1RawOBUHeader *header; >>> - >>> + int dim_change = 0; >>> if (!obu) >>> continue; >>> >>> @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) >>> >>> s->raw_seq = &obu->obu.sequence_header; >>> >>> - ret = set_context_with_sequence(avctx, s->raw_seq); >>> + dim_change = 0; >>> + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); >>> if (ret < 0) { >>> av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); >>> s->raw_seq = NULL; >>> @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) >>> >>> s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; >>> >>> - if (s->pix_fmt == AV_PIX_FMT_NONE) { >>> + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { >>> ret = get_pixel_format(avctx); >> >> Dimensions can change between frames without a seq header showing up to >> change the max_width/height values. get_pixel_format() would need to be >> called on frame headers instead. > > It can but my reading of the spec is that it is illegal to go beyond > the max in sequence header. > > 6.8 Frame header OBU semantics > 6.8.4 Frame size semantics > > " > It is a requirement of bitstream conformance that frame_width_minus_1 > is less than or equal to max_frame_width_minus_1. > It is a requirement of bitstream conformance that frame_height_minus_1 > is less than or equal to max_frame_height_minus_1. > " > > Dave. So Vulkan always allocates buffers for the max allowed dimensions and not for the current frame's dimensions?
On Thu, 22 Jun 2023 at 07:36, James Almer <jamrial@gmail.com> wrote: > > On 6/21/2023 6:15 PM, Dave Airlie wrote: > > On Thu, 22 Jun 2023 at 02:36, James Almer <jamrial@gmail.com> wrote: > >> > >> On 6/20/2023 8:36 PM, airlied@gmail.com wrote: > >>> From: Dave Airlie <airlied@redhat.com> > >>> > >>> av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the > >>> images get resized when dimensions change, this detects the dim > >>> change and calls the get_format to reinit the context. > >>> --- > >>> libavcodec/av1dec.c | 12 ++++++++---- > >>> 1 file changed, 8 insertions(+), 4 deletions(-) > >>> > >>> diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c > >>> index e7f98a6c81..1cec328563 100644 > >>> --- a/libavcodec/av1dec.c > >>> +++ b/libavcodec/av1dec.c > >>> @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) > >>> } > >>> > >>> static int set_context_with_sequence(AVCodecContext *avctx, > >>> + int *dim_change, > >>> const AV1RawSequenceHeader *seq) > >>> { > >>> int width = seq->max_frame_width_minus_1 + 1; > >>> @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, > >>> int ret = ff_set_dimensions(avctx, width, height); > >>> if (ret < 0) > >>> return ret; > >>> + if (dim_change) > >>> + *dim_change = 1; > >>> } > >>> avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; > >>> > >>> @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) > >>> goto end; > >>> } > >>> > >>> - ret = set_context_with_sequence(avctx, seq); > >>> + ret = set_context_with_sequence(avctx, NULL, seq); > >>> if (ret < 0) { > >>> av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); > >>> goto end; > >>> @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > >>> CodedBitstreamUnit *unit = &s->current_obu.units[i]; > >>> AV1RawOBU *obu = unit->content; > >>> const AV1RawOBUHeader *header; > >>> - > >>> + int dim_change = 0; > >>> if (!obu) > >>> continue; > >>> > >>> @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > >>> > >>> s->raw_seq = &obu->obu.sequence_header; > >>> > >>> - ret = set_context_with_sequence(avctx, s->raw_seq); > >>> + dim_change = 0; > >>> + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); > >>> if (ret < 0) { > >>> av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); > >>> s->raw_seq = NULL; > >>> @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) > >>> > >>> s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; > >>> > >>> - if (s->pix_fmt == AV_PIX_FMT_NONE) { > >>> + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { > >>> ret = get_pixel_format(avctx); > >> > >> Dimensions can change between frames without a seq header showing up to > >> change the max_width/height values. get_pixel_format() would need to be > >> called on frame headers instead. > > > > It can but my reading of the spec is that it is illegal to go beyond > > the max in sequence header. > > > > 6.8 Frame header OBU semantics > > 6.8.4 Frame size semantics > > > > " > > It is a requirement of bitstream conformance that frame_width_minus_1 > > is less than or equal to max_frame_width_minus_1. > > It is a requirement of bitstream conformance that frame_height_minus_1 > > is less than or equal to max_frame_height_minus_1. > > " > > > > Dave. > > So Vulkan always allocates buffers for the max allowed dimensions and > not for the current frame's dimensions? It doesn't seem to be in vulkan specific code: av1dec.c:set_context_with_sequence int width = seq->max_frame_width_minus_1 + 1; int height = seq->max_frame_height_minus_1 + 1; is where it sets the values later used to allocate the frames. Dave.
On 6/21/2023 6:42 PM, Dave Airlie wrote: > On Thu, 22 Jun 2023 at 07:36, James Almer <jamrial@gmail.com> wrote: >> >> On 6/21/2023 6:15 PM, Dave Airlie wrote: >>> On Thu, 22 Jun 2023 at 02:36, James Almer <jamrial@gmail.com> wrote: >>>> >>>> On 6/20/2023 8:36 PM, airlied@gmail.com wrote: >>>>> From: Dave Airlie <airlied@redhat.com> >>>>> >>>>> av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the >>>>> images get resized when dimensions change, this detects the dim >>>>> change and calls the get_format to reinit the context. >>>>> --- >>>>> libavcodec/av1dec.c | 12 ++++++++---- >>>>> 1 file changed, 8 insertions(+), 4 deletions(-) >>>>> >>>>> diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c >>>>> index e7f98a6c81..1cec328563 100644 >>>>> --- a/libavcodec/av1dec.c >>>>> +++ b/libavcodec/av1dec.c >>>>> @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) >>>>> } >>>>> >>>>> static int set_context_with_sequence(AVCodecContext *avctx, >>>>> + int *dim_change, >>>>> const AV1RawSequenceHeader *seq) >>>>> { >>>>> int width = seq->max_frame_width_minus_1 + 1; >>>>> @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, >>>>> int ret = ff_set_dimensions(avctx, width, height); >>>>> if (ret < 0) >>>>> return ret; >>>>> + if (dim_change) >>>>> + *dim_change = 1; >>>>> } >>>>> avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; >>>>> >>>>> @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) >>>>> goto end; >>>>> } >>>>> >>>>> - ret = set_context_with_sequence(avctx, seq); >>>>> + ret = set_context_with_sequence(avctx, NULL, seq); >>>>> if (ret < 0) { >>>>> av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); >>>>> goto end; >>>>> @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) >>>>> CodedBitstreamUnit *unit = &s->current_obu.units[i]; >>>>> AV1RawOBU *obu = unit->content; >>>>> const AV1RawOBUHeader *header; >>>>> - >>>>> + int dim_change = 0; >>>>> if (!obu) >>>>> continue; >>>>> >>>>> @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) >>>>> >>>>> s->raw_seq = &obu->obu.sequence_header; >>>>> >>>>> - ret = set_context_with_sequence(avctx, s->raw_seq); >>>>> + dim_change = 0; >>>>> + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); >>>>> if (ret < 0) { >>>>> av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); >>>>> s->raw_seq = NULL; >>>>> @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) >>>>> >>>>> s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; >>>>> >>>>> - if (s->pix_fmt == AV_PIX_FMT_NONE) { >>>>> + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { >>>>> ret = get_pixel_format(avctx); >>>> >>>> Dimensions can change between frames without a seq header showing up to >>>> change the max_width/height values. get_pixel_format() would need to be >>>> called on frame headers instead. >>> >>> It can but my reading of the spec is that it is illegal to go beyond >>> the max in sequence header. >>> >>> 6.8 Frame header OBU semantics >>> 6.8.4 Frame size semantics >>> >>> " >>> It is a requirement of bitstream conformance that frame_width_minus_1 >>> is less than or equal to max_frame_width_minus_1. >>> It is a requirement of bitstream conformance that frame_height_minus_1 >>> is less than or equal to max_frame_height_minus_1. >>> " >>> >>> Dave. >> >> So Vulkan always allocates buffers for the max allowed dimensions and >> not for the current frame's dimensions? > > It doesn't seem to be in vulkan specific code: > > av1dec.c:set_context_with_sequence > int width = seq->max_frame_width_minus_1 + 1; > int height = seq->max_frame_height_minus_1 + 1; > > is where it sets the values later used to allocate the frames. > > Dave. I see a call to ff_set_dimensions() in update_context_with_frame_header() which uses frame header dimensions.
diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c index e7f98a6c81..1cec328563 100644 --- a/libavcodec/av1dec.c +++ b/libavcodec/av1dec.c @@ -721,6 +721,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) } static int set_context_with_sequence(AVCodecContext *avctx, + int *dim_change, const AV1RawSequenceHeader *seq) { int width = seq->max_frame_width_minus_1 + 1; @@ -753,6 +754,8 @@ static int set_context_with_sequence(AVCodecContext *avctx, int ret = ff_set_dimensions(avctx, width, height); if (ret < 0) return ret; + if (dim_change) + *dim_change = 1; } avctx->sample_aspect_ratio = (AVRational) { 1, 1 }; @@ -859,7 +862,7 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) goto end; } - ret = set_context_with_sequence(avctx, seq); + ret = set_context_with_sequence(avctx, NULL, seq); if (ret < 0) { av_log(avctx, AV_LOG_WARNING, "Failed to set decoder context.\n"); goto end; @@ -1202,7 +1205,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) CodedBitstreamUnit *unit = &s->current_obu.units[i]; AV1RawOBU *obu = unit->content; const AV1RawOBUHeader *header; - + int dim_change = 0; if (!obu) continue; @@ -1220,7 +1223,8 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) s->raw_seq = &obu->obu.sequence_header; - ret = set_context_with_sequence(avctx, s->raw_seq); + dim_change = 0; + ret = set_context_with_sequence(avctx, &dim_change, s->raw_seq); if (ret < 0) { av_log(avctx, AV_LOG_ERROR, "Failed to set context.\n"); s->raw_seq = NULL; @@ -1229,7 +1233,7 @@ static int av1_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame) s->operating_point_idc = s->raw_seq->operating_point_idc[s->operating_point]; - if (s->pix_fmt == AV_PIX_FMT_NONE) { + if (s->pix_fmt == AV_PIX_FMT_NONE || dim_change) { ret = get_pixel_format(avctx); if (ret < 0) { av_log(avctx, AV_LOG_ERROR,
From: Dave Airlie <airlied@redhat.com> av1-1-b8-03-sizeup.ivf on vulkan causes gpu hangs as none of the images get resized when dimensions change, this detects the dim change and calls the get_format to reinit the context. --- libavcodec/av1dec.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)