[FFmpeg-devel,v2] doc: various spelling, grammar and formatting fixes

Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
---
 doc/filters.texi | 69 ++++++++++++++++++++++++------------------------
 doc/muxers.texi  |  4 +--
 2 files changed, 37 insertions(+), 36 deletions(-)

--
2.20.1

On 17-09-2019 01:51 PM, Moritz Barsnick wrote:
> Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
> ---
>   doc/filters.texi | 69 ++++++++++++++++++++++++------------------------
>   doc/muxers.texi  |  4 +--
>   2 files changed, 37 insertions(+), 36 deletions(-)
>
> diff --git a/doc/filters.texi b/doc/filters.texi
> index bbfdad4d4d..6ed0e79f16 100644
> --- a/doc/filters.texi
> +++ b/doc/filters.texi
> @@ -756,7 +756,7 @@ aecho=0.8:0.88:60:0.4
>   @end example
>
>   @item
> -If delay is very short, then it sound like a (metallic) robot playing music:
> +If delay is very short, then it sounds like a (metallic) robot playing music:
>   @example
>   aecho=0.8:0.88:6:0.4
>   @end example
> @@ -1157,11 +1157,11 @@ It can be used as component for digital crossover filters,
>   room equalization, cross talk cancellation, wavefield synthesis,
>   auralization, ambiophonics, ambisonics and spatialization.
>
> -This filter uses second stream as FIR coefficients.
> -If second stream holds single channel, it will be used
> -for all input channels in first stream, otherwise
> -number of channels in second stream must be same as
> -number of channels in first stream.
> +This filter uses the second stream as FIR coefficients.
> +If the second stream holds a single channel, it will be used
> +for all input channels in the first stream, otherwise
> +the number of channels in the second stream must be same as
> +the number of channels in the first stream.
>
>   It accepts the following parameters:
>
> @@ -1766,7 +1766,7 @@ Each sample is adjusted by looking for other samples with similar contexts. This
>   context similarity is defined by comparing their surrounding patches of size
>   @option{p}. Patches are searched in an area of @option{r} around the sample.
>
> -The filter accepts the following options.
> +The filter accepts the following options:
>
>   @table @option
>   @item s
> @@ -2965,12 +2965,12 @@ Compensation Delay Line is a metric based delay to compensate differing
>   positions of microphones or speakers.
>
>   For example, you have recorded guitar with two microphones placed in
> -different location. Because the front of sound wave has fixed speed in
> +different locations. Because the front of sound wave has fixed speed in
>   normal conditions, the phasing of microphones can vary and depends on
>   their location and interposition. The best sound mix can be achieved when
> -these microphones are in phase (synchronized). Note that distance of
> -~30 cm between microphones makes one microphone to capture signal in
> -antiphase to another microphone. That makes the final mix sounding moody.
> +these microphones are in phase (synchronized). Note that a distance of
> +~30 cm between microphones makes one microphone capture the signal in
> +antiphase to the other microphone. That makes the final mix sound moody.
>   This filter helps to solve phasing problems by adding different delays
>   to each microphone track and make them synchronized.
>
> @@ -2979,7 +2979,7 @@ synchronize other tracks one by one with it.
>   Remember that synchronization/delay tolerance depends on sample rate, too.
>   Higher sample rates will give more tolerance.
>
> -It accepts the following parameters:
> +The filter accepts the following parameters:
>
>   @table @option
>   @item mm
> @@ -3003,7 +3003,7 @@ Set wet amount. Amount of processed (wet) signal.
>   Default is 1.
>
>   @item temp
> -Set temperature degree in Celsius. This is the temperature of the environment.
> +Set temperature in degrees Celsius. This is the temperature of the environment.
>   Default is 20.
>   @end table
>
> @@ -6638,7 +6638,7 @@ If the interlacing is unknown or the decoder does not export this information,
>   top field first will be assumed.
>
>   @item deint
> -Specify which frames to deinterlace. Accept one of the following
> +Specify which frames to deinterlace. Accepts one of the following
>   values:
>
>   @table @option
> @@ -11423,7 +11423,7 @@ All streams must be of same pixel format and of same height.
>   Note that this filter is faster than using @ref{overlay} and @ref{pad} filter
>   to create same output.
>
> -The filter accept the following option:
> +The filter accepts the following option:
>
>   @table @option
>   @item inputs
> @@ -13262,7 +13262,7 @@ the following values: "blur", "blur_no_scale", "median", "gaussian",
>   or "bilateral". The default value is "gaussian".
>
>   The meaning of @var{param1}, @var{param2}, @var{param3}, and @var{param4}
> -depend on the smooth type. @var{param1} and
> +depends on the smooth type. @var{param1} and
>   @var{param2} accept integer positive values or 0. @var{param3} and
>   @var{param4} accept floating point values.
>
> @@ -14443,7 +14443,7 @@ __kernel void blend_images(__write_only image2d_t dst,
>
>   Alter frame colors in video with pseudocolors.
>
> -This filter accept the following options:
> +This filter accepts the following options:
>
>   @table @option
>   @item c0
> @@ -14768,7 +14768,7 @@ Enable checking the parity bit. In the event of a parity error, the filter will
>   @code{0x00} for that character. Default is false.
>
>   @item lp
> -Lowpass lines prior further proccessing. Default is disabled.
> +Lowpass lines prior to further processing. Default is disabled.
>   @end table
>
>   @subsection Examples
> @@ -18745,7 +18745,7 @@ All streams must be of same pixel format and of same width.
>   Note that this filter is faster than using @ref{overlay} and @ref{pad} filter
>   to create same output.
>
> -The filter accept the following option:
> +The filter accepts the following options:
>
>   @table @option
>   @item inputs
> @@ -18766,11 +18766,11 @@ implemented based on the de-interlace algorithm written by Jim
>   Easterbrook for BBC R&D, the Weston 3 field deinterlacing filter
>   uses filter coefficients calculated by BBC R&D.
>
> -This filter use field-dominance information in frame to decide which
> +This filter uses field-dominance information in frame to decide which
>   of each pair of fields to place first in the output.
>   If it gets it wrong use @ref{setfield} filter before @code{w3fdif} filter.
>
> -There are two sets of filter coefficients, so called "simple":
> +There are two sets of filter coefficients, so called "simple"
>   and "complex". Which set of filter coefficients is used can
>   be set by passing an optional parameter:
>
> @@ -18787,7 +18787,7 @@ More-complex filter coefficient set.
>   Default value is @samp{complex}.
>
>   @item deint
> -Specify which frames to deinterlace. Accept one of the following values:
> +Specify which frames to deinterlace. Accepts one of the following values:
>
>   @table @samp
>   @item all
> @@ -18995,7 +18995,7 @@ Default is @code{3}.
>   @section xmedian
>   Pick median pixels from several input videos.
>
> -The filter accept the following options:
> +The filter accepts the following options:
>
>   @table @option
>   @item inputs
> @@ -19012,7 +19012,7 @@ Stack video inputs into custom layout.
>
>   All streams must be of same pixel format.
>
> -The filter accept the following option:
> +The filter accepts the following options:
>
>   @table @option
>   @item inputs
> @@ -19041,24 +19041,24 @@ terminates. Default value is 0.
>
>   @itemize
>   @item
> -Display 4 inputs into 2x2 grid,
> -note that if inputs are of different sizes unused gaps might appear,
> +Display 4 inputs into 2x2 grid.
> +Note that if inputs are of different sizes unused gaps might appear,
>   as not all of output video is used.
>   @example
>   xstack=inputs=4:layout=0_0|0_h0|w0_0|w0_h0
>   @end example
>
>   @item
> -Display 4 inputs into 1x4 grid,
> -note that if inputs are of different sizes unused gaps might appear,
> +Display 4 inputs into 1x4 grid.
> +Note that if inputs are of different sizes unused gaps might appear,
>   as not all of output video is used.
>   @example
>   xstack=inputs=4:layout=0_0|0_h0|0_h0+h1|0_h0+h1+h2
>   @end example
>
>   @item
> -Display 9 inputs into 3x3 grid,
> -note that if inputs are of different sizes unused gaps might appear,
> +Display 9 inputs into 3x3 grid.
> +Note that if inputs are of different sizes unused gaps might appear,
>   as not all of output video is used.
>   @example
>   xstack=inputs=9:layout=w3_0|w3_h0+h2|w3_h0|0_h4|0_0|w3+w1_0|0_h1+h2|w3+w1_h0|w3+w1_h1+h2
> @@ -19110,7 +19110,7 @@ If the interlacing is unknown or the decoder does not export this information,
>   top field first will be assumed.
>
>   @item deint
> -Specify which frames to deinterlace. Accept one of the following
> +Specify which frames to deinterlace. Accepts one of the following
>   values:
>
>   @table @option
> @@ -19168,7 +19168,7 @@ If the interlacing is unknown or the decoder does not export this information,
>   top field first will be assumed.
>
>   @item deint
> -Specify which frames to deinterlace. Accept one of the following
> +Specify which frames to deinterlace. Accepts one of the following
>   values:
>
>   @table @option
> @@ -22571,8 +22571,9 @@ implemented with custom @var{basefreq} and @var{endfreq}, use @var{axisfile}
>   option instead.
>
>   @item font
> -Specify fontconfig pattern. This has lower priority than @var{fontfile}.
> -The : in the pattern may be replaced by | to avoid unnecessary escaping.
> +Specify fontconfig pattern. This has lower priority than @var{fontfile}. The
> +@code{:} in the pattern may be replaced by @code{|} to avoid unnecessary
> +escaping.
>
>   @item fontcolor
>   Specify font color expression. This is arithmetic expression that should return
> diff --git a/doc/muxers.texi b/doc/muxers.texi
> index 20d31b279c..0adb93ba55 100644
> --- a/doc/muxers.texi
> +++ b/doc/muxers.texi
> @@ -902,8 +902,8 @@ serving up segments can be configured to reject requests to *.tmp to prevent acc
>   before they have been added to the m3u8 playlist. This flag also affects how m3u8 playlist files are created.
>   If this flag is set, all playlist files will written into temporary file and renamed after they are complete, similarly as segments are handled.
>   But playlists with @code{file} protocol and with type (@code{hls_playlist_type}) other than @code{vod}
> -are always written into temporary file regardles of this flag. Master playlist files (@code{master_pl_name}), if any, with @code{file} protocol,
> -are always written into temporary file regardles of this flag if @code{master_pl_publish_rate} value is other than zero.
> +are always written into temporary file regardless of this flag. Master playlist files (@code{master_pl_name}), if any, with @code{file} protocol,
> +are always written into temporary file regardless of this flag if @code{master_pl_publish_rate} value is other than zero.
>
>   @end table
>
> --
> 2.20.1

Pushed as 53d31e91c5302131cf0631c053d04f09b36897ee

Thanks,
Gyan