| Message ID | tencent_B0D12DCB0981661FC678313A81AF67A7E60A@qq.com |
|---|---|
| State | New |
| Headers | show |
| Series | [FFmpeg-devel] avcodec/videotoolboxenc: add low-latency encoding | expand |
| Context | Check | Description |
|---|---|---|
| yinshiyou/make_loongarch64 | success | Make finished |
| yinshiyou/make_fate_loongarch64 | success | Make fate finished |
> On May 19, 2023, at 11:17, xufuji456 <839789740@qq.com> wrote: > > When using low-latency mode, it eliminates frame reordering > and follows a one-in-one-out encoding mode > > Signed-off-by: xufuji456 <839789740@qq.com> > --- > libavcodec/videotoolboxenc.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/libavcodec/videotoolboxenc.c b/libavcodec/videotoolboxenc.c > index c6f22723d6..ae1ef32b2d 100644 > --- a/libavcodec/videotoolboxenc.c > +++ b/libavcodec/videotoolboxenc.c > @@ -1441,6 +1441,17 @@ static int vtenc_create_encoder(AVCodecContext *avctx, > } > } > > + // low-latency mode: eliminate frame reordering, follow a one-in-one-out encoding mode > + if ((avctx->flags & AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == AV_CODEC_ID_H264) { > + status = VTSessionSetProperty(vtctx->session, > + kVTVideoEncoderSpecification_EnableLowLatencyRateControl, > + kCFBooleanTrue); Please use compat_keys in case of kVTVideoEncoderSpecification_EnableLowLatencyRateControl isn’t available. > + > + if (status) { > + av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", status); > + } > + } > + > status = VTCompressionSessionPrepareToEncodeFrames(vtctx->session); > if (status) { > av_log(avctx, AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status); > -- > 2.32.0 (Apple Git-132) > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
Thank you for your review, and point out the details.
Actually, I have also considered this issue.
I see that some keys are used directly, some are used by compatibility.
I will use compat_key instead, and submit a new patch.
------------------ 原始邮件 ------------------
发件人: ""zhilizhao(赵志立)"" <quinkblack@foxmail.com>;
发送时间: 2023年5月19日(星期五) 中午11:34
收件人: "FFmpeg development discussions and patches"<ffmpeg-devel@ffmpeg.org>;
抄送: "徐福隆"<839789740@qq.com>;
主题: Re: [FFmpeg-devel] [PATCH] avcodec/videotoolboxenc: add low-latency encoding
> On May 19, 2023, at 11:17, xufuji456 <839789740@qq.com> wrote:
>
> When using low-latency mode, it eliminates frame reordering
> and follows a one-in-one-out encoding mode
>
> Signed-off-by: xufuji456 <839789740@qq.com>
> ---
> libavcodec/videotoolboxenc.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/libavcodec/videotoolboxenc.c b/libavcodec/videotoolboxenc.c
> index c6f22723d6..ae1ef32b2d 100644
> --- a/libavcodec/videotoolboxenc.c
> +++ b/libavcodec/videotoolboxenc.c
> @@ -1441,6 +1441,17 @@ static int vtenc_create_encoder(AVCodecContext *avctx,
> }
> }
>
> + // low-latency mode: eliminate frame reordering, follow a one-in-one-out encoding mode
> + if ((avctx->flags & AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == AV_CODEC_ID_H264) {
> + status = VTSessionSetProperty(vtctx->session,
> + kVTVideoEncoderSpecification_EnableLowLatencyRateControl,
> + kCFBooleanTrue);
Please use compat_keys in case of kVTVideoEncoderSpecification_EnableLowLatencyRateControl
isn’t available.
> +
> + if (status) {
> + av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", status);
> + }
> + }
> +
> status = VTCompressionSessionPrepareToEncodeFrames(vtctx->session);
> if (status) {
> av_log(avctx, AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status);
> --
> 2.32.0 (Apple Git-132)
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
On Fri, May 19, 2023 at 1:56 AM 徐福隆 <839789740@qq.com> wrote: > Thank you for your review, and point out the details. > Actually, I have also considered this issue. > I see that some keys are used directly, some are used by compatibility. > The compat_keys are used for symbols that might not exist. For constants available in the earliest version of VideoToolbox, compat_keys doesn't need to be used. Your patch looks good - I'll push it shortly. > I will use compat_key instead, and submit a new patch. > > > ------------------ 原始邮件 ------------------ > 发件人: > ""zhilizhao(赵志立)"" > > <quinkblack@foxmail.com>; > 发送时间: 2023年5月19日(星期五) 中午11:34 > 收件人: "FFmpeg development discussions and patches"< > ffmpeg-devel@ffmpeg.org>; > 抄送: "徐福隆"<839789740@qq.com>; > 主题: Re: [FFmpeg-devel] [PATCH] avcodec/videotoolboxenc: add > low-latency encoding > > > > > > > On May 19, 2023, at 11:17, xufuji456 <839789740@qq.com> wrote: > > > > When using low-latency mode, it eliminates frame reordering > > and follows a one-in-one-out encoding mode > > > > Signed-off-by: xufuji456 <839789740@qq.com> > > --- > > libavcodec/videotoolboxenc.c | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/libavcodec/videotoolboxenc.c > b/libavcodec/videotoolboxenc.c > > index c6f22723d6..ae1ef32b2d 100644 > > --- a/libavcodec/videotoolboxenc.c > > +++ b/libavcodec/videotoolboxenc.c > > @@ -1441,6 +1441,17 @@ static int > vtenc_create_encoder(AVCodecContext *avctx, > > } > > } > > > > + // low-latency mode: eliminate frame reordering, > follow a one-in-one-out encoding mode > > + if ((avctx->flags & > AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == AV_CODEC_ID_H264) > { > > + status = > VTSessionSetProperty(vtctx->session, > > > + > kVTVideoEncoderSpecification_EnableLowLatencyRateControl, > > > + > kCFBooleanTrue); > > Please use compat_keys in case of > kVTVideoEncoderSpecification_EnableLowLatencyRateControl > isn’t available. > > > + > > + if (status) { > > + > av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", > status); > > + } > > + } > > + > > status = > VTCompressionSessionPrepareToEncodeFrames(vtctx->session); > > if (status) { > > av_log(avctx, > AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status); > > -- > > 2.32.0 (Apple Git-132) > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >
> From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf Of Rick Kern > Sent: 2023年5月19日 21:37 > To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> > Cc: zhilizhao(赵志立) <quinkblack@foxmail.com> > Subject: Re: [FFmpeg-devel] 回复： [PATCH] avcodec/videotoolboxenc: add low-latency encoding > > On Fri, May 19, 2023 at 1:56 AM 徐福隆 <839789740@qq.com> wrote: > > > Thank you for your review, and point out the details. > > Actually, I have also considered this issue. > > I see that some keys are used directly, some are used by compatibility. > > > > The compat_keys are used for symbols that might not exist. For constants > available in the earliest version of VideoToolbox, compat_keys doesn't need > to be used. I curious to know what's the minimum supported version of macOS which doesn't need dynamic loading symbols. I can't find such information. The question applies to other OS too. It's not clear from configure, and I can't find the relevant documentation. > > Your patch looks good - I'll push it shortly. > > > > I will use compat_key instead, and submit a new patch. > > > > > > ------------------ 原始邮件 ------------------ > > 发件人: > > ""zhilizhao(赵志立)"" > > > > <quinkblack@foxmail.com>; > > 发送时间: 2023年5月19日(星期五) 中午11:34 > > 收件人: "FFmpeg development discussions and patches"< > > ffmpeg-devel@ffmpeg.org>; > > 抄送: "徐福隆"<839789740@qq.com>; > > 主题: Re: [FFmpeg-devel] [PATCH] avcodec/videotoolboxenc: add > > low-latency encoding > > > > > > > > > > > > > On May 19, 2023, at 11:17, xufuji456 <839789740@qq.com> wrote: > > > > > > When using low-latency mode, it eliminates frame reordering > > > and follows a one-in-one-out encoding mode > > > > > > Signed-off-by: xufuji456 <839789740@qq.com> > > > --- > > > libavcodec/videotoolboxenc.c | 11 +++++++++++ > > > 1 file changed, 11 insertions(+) > > > > > > diff --git a/libavcodec/videotoolboxenc.c > > b/libavcodec/videotoolboxenc.c > > > index c6f22723d6..ae1ef32b2d 100644 > > > --- a/libavcodec/videotoolboxenc.c > > > +++ b/libavcodec/videotoolboxenc.c > > > @@ -1441,6 +1441,17 @@ static int > > vtenc_create_encoder(AVCodecContext *avctx, > > > } > > > } > > > > > > + // low-latency mode: eliminate frame reordering, > > follow a one-in-one-out encoding mode > > > + if ((avctx->flags & > > AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == AV_CODEC_ID_H264) > > { > > > + status = > > VTSessionSetProperty(vtctx->session, > > > > > > +   > ; > > kVTVideoEncoderSpecification_EnableLowLatencyRateControl, > > > > > > +   > ; > > kCFBooleanTrue); > > > > Please use compat_keys in case of > > kVTVideoEncoderSpecification_EnableLowLatencyRateControl > > isn’t available. > > > > > + > > > + if (status) { > > > + > > av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", > > status); > > > + } > > > + } > > > + > > > status = > > VTCompressionSessionPrepareToEncodeFrames(vtctx->session); > > > if (status) { > > > av_log(avctx, > > AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status); > > > -- > > > 2.32.0 (Apple Git-132) > > > > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
On Fri, May 19, 2023 at 2:06 PM Zhao Zhili <quinkblack@foxmail.com> wrote: > > > From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf Of Rick > Kern > > Sent: 2023年5月19日 21:37 > > To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> > > Cc: zhilizhao(赵志立) <quinkblack@foxmail.com> > > Subject: Re: [FFmpeg-devel] 回复： [PATCH] avcodec/videotoolboxenc: add > low-latency encoding > > > > On Fri, May 19, 2023 at 1:56 AM 徐福隆 <839789740@qq.com> wrote: > > > > > Thank you for your review, and point out the details. > > > Actually, I have also considered this issue. > > > I see that some keys are used directly, some are used by compatibility. > > > > > > > The compat_keys are used for symbols that might not exist. For constants > > available in the earliest version of VideoToolbox, compat_keys doesn't > need > > to be used. > > I curious to know what's the minimum supported version of macOS which > doesn't need dynamic loading symbols. I can't find such information. The > question > applies to other OS too. It's not clear from configure, and I can't find > the relevant > documentation. > VideoToolbox was released in MacOS 10.8 and iOS 8.0. I'll update the compat_keys docs with this info. > > > > Your patch looks good - I'll push it shortly. > > > > > > > I will use compat_key instead, and submit a new patch. > > > > > > > > > ------------------ 原始邮件 ------------------ > > > 发件人: > > > ""zhilizhao(赵志立)"" > > > > > > <quinkblack@foxmail.com>; > > > 发送时间: 2023年5月19日(星期五) 中午11:34 > > > 收件人: "FFmpeg development discussions and patches"< > > > ffmpeg-devel@ffmpeg.org>; > > > 抄送: "徐福隆"<839789740@qq.com>; > > > 主题: Re: [FFmpeg-devel] [PATCH] avcodec/videotoolboxenc: add > > > low-latency encoding > > > > > > > > > > > > > > > > > > > On May 19, 2023, at 11:17, xufuji456 <839789740@qq.com> wrote: > > > > > > > > When using low-latency mode, it eliminates frame reordering > > > > and follows a one-in-one-out encoding mode > > > > > > > > Signed-off-by: xufuji456 <839789740@qq.com> > > > > --- > > > > libavcodec/videotoolboxenc.c | 11 +++++++++++ > > > > 1 file changed, 11 insertions(+) > > > > > > > > diff --git a/libavcodec/videotoolboxenc.c > > > b/libavcodec/videotoolboxenc.c > > > > index c6f22723d6..ae1ef32b2d 100644 > > > > --- a/libavcodec/videotoolboxenc.c > > > > +++ b/libavcodec/videotoolboxenc.c > > > > @@ -1441,6 +1441,17 @@ static int > > > vtenc_create_encoder(AVCodecContext *avctx, > > > > } > > > > } > > > > > > > > + // low-latency mode: eliminate frame > reordering, > > > follow a one-in-one-out encoding mode > > > > + if ((avctx->flags & > > > AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == > AV_CODEC_ID_H264) > > > { > > > > + status = > > > VTSessionSetProperty(vtctx->session, > > > > > > > > > > +   > > > ; > > > kVTVideoEncoderSpecification_EnableLowLatencyRateControl, > > > > > > > > > > +   > > > ; > > > kCFBooleanTrue); > > > > > > Please use compat_keys in case of > > > kVTVideoEncoderSpecification_EnableLowLatencyRateControl > > > isn’t available. > > > > > > > + > > > > + if (status) { > > > > > + > > > av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", > > > status); > > > > + } > > > > + } > > > > + > > > > status = > > > VTCompressionSessionPrepareToEncodeFrames(vtctx->session); > > > > if (status) { > > > > av_log(avctx, > > > AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status); > > > > -- > > > > 2.32.0 (Apple Git-132) > > > > > > > > _______________________________________________ > > > > ffmpeg-devel mailing list > > > > ffmpeg-devel@ffmpeg.org > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > > > To unsubscribe, visit link above, or email > > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >
> From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf Of Rick Kern > Sent: 2023年5月20日 23:01 > To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> > Subject: Re: [FFmpeg-devel] 回复： [PATCH] avcodec/videotoolboxenc: add low-latency encoding > > On Fri, May 19, 2023 at 2:06 PM Zhao Zhili <quinkblack@foxmail.com> wrote: > > > > > > From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf Of Rick > > Kern > > > Sent: 2023年5月19日 21:37 > > > To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> > > > Cc: zhilizhao(赵志立) <quinkblack@foxmail.com> > > > Subject: Re: [FFmpeg-devel] 回复： [PATCH] avcodec/videotoolboxenc: add > > low-latency encoding > > > > > > On Fri, May 19, 2023 at 1:56 AM 徐福隆 <839789740@qq.com> wrote: > > > > > > > Thank you for your review, and point out the details. > > > > Actually, I have also considered this issue. > > > > I see that some keys are used directly, some are used by compatibility. > > > > > > > > > > The compat_keys are used for symbols that might not exist. For constants > > > available in the earliest version of VideoToolbox, compat_keys doesn't > > need > > > to be used. > > > > I curious to know what's the minimum supported version of macOS which > > doesn't need dynamic loading symbols. I can't find such information. The > > question > > applies to other OS too. It's not clear from configure, and I can't find > > the relevant > > documentation. > > > VideoToolbox was released in MacOS 10.8 and iOS 8.0. I'll update the > compat_keys docs with this info. Maybe it's off-topic, but besides than the first version of MacOS which has videotoolbox supports, I'm considering the strategy from FFmpeg's side: how to decide when to bump the minimum supported version of OS, like "[RFC] [Vote] Drop Windows XP support". https://ffmpeg.org/pipermail/ffmpeg-devel/2017-December/222354.html I'm not saying it's time to bump the required version of macOS now, but as time goes by, we might need to do that in the future for other OS, to relief the maintaining burden. > > > > > > > > Your patch looks good - I'll push it shortly. > > > > > > > > > > I will use compat_key instead, and submit a new patch. > > > > > > > > > > > > ------------------ 原始邮件 ------------------ > > > > 发件人: > > > > ""zhilizhao(赵志立)"" > > > > > > > > <quinkblack@foxmail.com>; > > > > 发送时间: 2023年5月19日(星期五) 中午11:34 > > > > 收件人: "FFmpeg development discussions and patches"< > > > > ffmpeg-devel@ffmpeg.org>; > > > > 抄送: "徐福隆"<839789740@qq.com>; > > > > 主题: Re: [FFmpeg-devel] [PATCH] avcodec/videotoolboxenc: add > > > > low-latency encoding > > > > > > > > > > > > > > > > > > > > > > > > > On May 19, 2023, at 11:17, xufuji456 <839789740@qq.com> wrote: > > > > > > > > > > When using low-latency mode, it eliminates frame reordering > > > > > and follows a one-in-one-out encoding mode > > > > > > > > > > Signed-off-by: xufuji456 <839789740@qq.com> > > > > > --- > > > > > libavcodec/videotoolboxenc.c | 11 +++++++++++ > > > > > 1 file changed, 11 insertions(+) > > > > > > > > > > diff --git a/libavcodec/videotoolboxenc.c > > > > b/libavcodec/videotoolboxenc.c > > > > > index c6f22723d6..ae1ef32b2d 100644 > > > > > --- a/libavcodec/videotoolboxenc.c > > > > > +++ b/libavcodec/videotoolboxenc.c > > > > > @@ -1441,6 +1441,17 @@ static int > > > > vtenc_create_encoder(AVCodecContext *avctx, > > > > > } > > > > > } > > > > > > > > > > + // low-latency mode: eliminate frame > > reordering, > > > > follow a one-in-one-out encoding mode > > > > > + if ((avctx->flags & > > > > AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == > > AV_CODEC_ID_H264) > > > > { > > > > > + status = > > > > VTSessionSetProperty(vtctx->session, > > > > > > > > > > > > > > > +   > > > > > ; > > > > kVTVideoEncoderSpecification_EnableLowLatencyRateControl, > > > > > > > > > > > > > > > +   > > > > > ; > > > > kCFBooleanTrue); > > > > > > > > Please use compat_keys in case of > > > > kVTVideoEncoderSpecification_EnableLowLatencyRateControl > > > > isn’t available. > > > > > > > > > + > > > > > + if (status) { > > > > > > > + > > > > av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", > > > > status); > > > > > + } > > > > > + } > > > > > + > > > > > status = > > > > VTCompressionSessionPrepareToEncodeFrames(vtctx->session); > > > > > if (status) { > > > > > av_log(avctx, > > > > AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status); > > > > > -- > > > > > 2.32.0 (Apple Git-132) > > > > > > > > > > _______________________________________________ > > > > > ffmpeg-devel mailing list > > > > > ffmpeg-devel@ffmpeg.org > > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > > > > > To unsubscribe, visit link above, or email > > > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > _______________________________________________ > > > > ffmpeg-devel mailing list > > > > ffmpeg-devel@ffmpeg.org > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > > > To unsubscribe, visit link above, or email > > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
diff --git a/libavcodec/videotoolboxenc.c b/libavcodec/videotoolboxenc.c index c6f22723d6..ae1ef32b2d 100644 --- a/libavcodec/videotoolboxenc.c +++ b/libavcodec/videotoolboxenc.c @@ -1441,6 +1441,17 @@ static int vtenc_create_encoder(AVCodecContext *avctx, } } + // low-latency mode: eliminate frame reordering, follow a one-in-one-out encoding mode + if ((avctx->flags & AV_CODEC_FLAG_LOW_DELAY) && avctx->codec_id == AV_CODEC_ID_H264) { + status = VTSessionSetProperty(vtctx->session, + kVTVideoEncoderSpecification_EnableLowLatencyRateControl, + kCFBooleanTrue); + + if (status) { + av_log(avctx, AV_LOG_ERROR, "Error setting low latency property: %d\n", status); + } + } + status = VTCompressionSessionPrepareToEncodeFrames(vtctx->session); if (status) { av_log(avctx, AV_LOG_ERROR, "Error: cannot prepare encoder: %d\n", status);
When using low-latency mode, it eliminates frame reordering and follows a one-in-one-out encoding mode Signed-off-by: xufuji456 <839789740@qq.com> --- libavcodec/videotoolboxenc.c | 11 +++++++++++ 1 file changed, 11 insertions(+)